Brought to you by the design team for the Oceangate Titan.

Or words to that effect.

I've assembled (9) ARs to this point from the ground up, and generally enjoy the process. I possess all of the necessary tools and equipment for both large frame and small builds.

Where build #10 is taking me though is into new territory for me...specifically I have in hand a 6.5 CM, steel Proof barrel, 22", with +2" gas, and JP enhanced bolt. It'll be going in an Aero (ewww) M5E1 set with 15" enhanced handguard. I got the whole set for $360 because it is in a fugly color and was a blem...nothing a little Krylon can't fix.

If I'm running the (most likely) SA AGB, are there any concerns with certain buffers and springs that I should know of and avoid? I have zero experience with the Creed, but my last .308 runs like a champ. I do intend on running a carbine stock and not fixed.

Admittedly, it has been about 3 years since I fully assembled an AR. So if there are cerain parts manufacturers these days who stand out in a good (or even bad) way, I'd love to know where to look, and where to avoid.

Not looking for the most hard-core parts, but don't mind spending a little more to get higher quality materials.

Much appreciated for any insight.

I have a new, mounted but never shot, Vortex Razor Gen2 4.5-27 MOA with EBR 7 reticle. I’m switching over to Mil based scopes and need to move this. I am asking 1200.00 shipped and that will include the set of Nightforce rings it sits in. Ships in the factory box with all parts and manuals.

Venmo, USPS money order, or personal check is accepted. Personal checks will clear before I ship. Venmo or money order payments will ship the following business day.

PM me with any questions.

I have 2 Manners TCS stocks for sale.

1st….. I have an Arctic Camo with M5 mini chassis. The chassis was bedded for a Nosler M21/Mack Bros Evo2 action. I took this in on trade thinking I would eventually try my hand at PRS but have no interest in that anymore. I am asking 1250.00 shipped and that will come with 1 magazine and action screws.

2nd….. I have a High Gloss Elite Tac High Plains that I was going to build a 22LR comp gun on. This is inlet for a Bat flat bottom Remington hole spacing action and M5 bottom metal. It could easily be bedded for a round bottom Remington clone. It does have the Sikes Clutch. I also have a Hawkins Precision m5 Hunter DBM with mag, pillars, the LOP spacers. This stock is new, never built on. I am asking 1450.00 for this and the parts mentioned.

I accept Venmo, USPS money orders, or personal checks. All checks will clear before I ship. Venmo or USPS money orders will ship the following business day.

PM me with any questions.

I am open to hear offers as well.

Thanks.

It was on my 300prc. Stock was painted and texture was added on grip and front end. Cip length bottom metal. Had arca rail so ready for another if you’re wanting one.

$250 shipped PayPal f/f

Like new 36mm Hawkins Heavy Tac rings 1.0" high. Perfect for a ZC420. Asking $180 shipped.

Like new condition AGS annealer with all inserts and set up to use 1 or 2 torches and mark brass. Comes with power cord.

Price is $200 shipped.
PP F&F preferred, or cashapp.

Brand new RCBS Summit press. Loaded 10 rounds with it. Bought it from RCBS directly.

**Edit: I'm throwing in the RCBS mounting plate for FREE. That's an additional $35 value.

Price is $240 shipped.
PP F&F (preferred) or cashapp.

Brand new RCBS Chargemaster Link. Literally only loaded 10 charges. Works great and will come in its original box. Bought it myself from RCBS.

Price is $200 shipped. Looking for a fast sale so act fast. PP F&F (preferred) or Cashapp.

So the left is accusing Israel of Genocide... In fact, the greatest Genocide since Hitler.

Let's do a bit of fact-checking here.

First, Chairman Mao (you know... who created the dreamy ChiComs) killed at least 100 million. And IMHO, a lot more. Was prepared to kill off >300 million to achieve his "Shining Path." So our butt buddies in China are pretty much 10X "Austrian Painter" numbers... when it comes to Genocide.

Then we have Pol Pot. About 3 million in the Killing Fields. Maybe as few as 2 million. But as far as "worst since Shickelgruber" goes... Yeah, that whack job is up there.

And let's not forget Saddam and a million or so Kurds. Or the folks in former Yugo. Or the usual cast of African Meat Cleaver Glitterati (I stole that line)... and Israel is still not even close to the killings in Chicago since Obama took office and turned the South Side into a shooting gallery.

Oh and let's talk about the 'real' Genocidal maniacs 'Since Der Fuhrer"... And that is Gates, Faucii, The Cuomos, and the rest of the murderers who used the Covid Hoax to inject hundreds of millions with poison. The numbers are, IMHO, going to ultimately measure into the 10's of millions. Worldwide. And millions in the USA. You know... child athletes. Young actors. Doctors, Nurses and health workers... who are dying at rates FAR over and above the norms. Oh and all those elderly they killed off in NY. And the hundreds of thousands of "Died Suddenly" cases that never make the news because they weren't on MTV or Facebook influencer faggots.

Greatest Genocide since "Mein Fuhrer!!!" (Peter Sellers, not me)... is a fucking retarded headline. IMHO, the greatest genocide worldwide is going to end up being Covid Vaccines. But the MSM is not going to report any of it.

Bill Gates and Fauci will go down as two of the greatest mass-murderers in history.. unless the Commies take over. In which case they will be heroes.

Fucking Commie mass-murderers and their goddamned Omlettes!

Sirhr

Background: I use to do 1000 Meters with my old Tikka T3X Tac A1 6.5 creedmore with 30MOA rings and Vortex Viper HS-T 6-24x50, but unfortunately had to sell it during covid and I plan on doing a custom build with a T3X in the future, instead of buying the same gun again. but for now I want to scratch that accuracy itch and my love for bolt actions, while spending a lot less money on gun and ammo and still having fun.

I have a Ruger 10/22 carbine but I wanted to get more accuracy for doing 50-400 Meters shooting.

I don't plan on NRL22 or PRS right now so that's not an issue

This seems like the best choices given the suggestions and budget.

Build 1 allows me to use my future T3X CTR or Super Varmint stock off a custom build I'm planning, plus upgrade the barrel.

Build 2 would be better starting out since it doesn't require any changes out of the box.


Build 1 Total ($1914 Cad)
Tikka T1x MTR .22LR, 20" ($825 Cad)
Vortex Venom 5-25x56 FFP MRAD ($749 Cad)
AREA 419 30 Moa Rail ($139 Cad)
Scope Rings ($200 Cad)
Bipod already owned


Build 2 ($2238 Cad)
CZ 457 VARMINT MTR .22LR, 20” ($1150 Cad)
Vortex Venom 5-25x56 FFP MRAD ($749 Cad)
AREA 419 30 Moa Rail ($139 Cad)
Scope Rings ($200 Cad)
Bipod already owned

Hey guys Good evening

Condition One COMM 30mm 1.54" height

Excellent condition

Asking$265 plus your preferred shipping

MDT Send It Level with box and in excellent condition

I do have a 90 deg mount that could be added for an additional cost

Asking $210 plus your preferred shipping

I have a Desert Tech SRS-A1 Conversion Kit LH Left Handed 16" .308 barrel bolt & magazine. Never used it - I purchased from a Sniper's Hide member but never purchased a LH Chassis. $1100.00. Free US Priority Mail Shipping Payment by Zelle or Venmo
Daniel

Nightforce 7-35x56f1 atac r with box has milxt reticle. No trades thank you. Only reason selling is I don’t have time to shoot anymore haven’t used since January. 2700.00

Condition One C1 Max scope mount 35 dia - 1.300" height

Asking $265, $245 plus your preferred shipping

Selling my 6 arc upper with the following parts:

18” Proof SS barrel
Superlative arms adjustable gas block
15” BCM KMR alpha
JP Bolt
Have to check on receiver brand (RRA?)
Mil spec CH

Night pic because it’s all I have while I’m on the road (home tomorrow night unless this hurricane says otherwise). Used burning good condition.

Shoots factory 108s at 2630fps and factor my 103s at 2700fps. Handled 75 VMAX were right at 3010fps with TAC 0.2gr off max load. I’d say 200 rounds down the pipe and shoots each of the loads above 1 to 1.1 MOA for 10 shots. 0.5 MOA for 5 shots if that matters

$950 shipped or $600 for the barrel / gas block

Add $50 if you want a keymo brake included

Walther PDP pro compact magazines (x3)

$80 plus your preferred method of shipping

I will not ship to ban states so please do not ask

American Rifle company M-Brace scope rings 35mm dia - 1.26" high

Excellent condition

Asking $130 plus your preferred shipping

Leupold MK 4 HD 6-24X52 MFC3 - PR2 Mil Reticle

BRAND NEW IN THE BOX

Asking $1350, $1250, $1150 plus your preferred method of shipping

Accuracy International AI AW magazine (x2)
Excellent condition

Asking SOLD plus your preferred method of shipping shippin

Proof Research
Carbon Fiber - Zermatt origin pre-fit
22" Sendero
Black cerakote
Less than 20 rounds fired
1:8 twist

Asking $sold shipped

Fellow Hide Members,

Sadly the time has come for me to start thinning the heard.

I have a Minox 5-25’s with the MR 4 reticle that I would like to sell. It is the white boxes version.

It is practically brand new. It’s been to the range probably 5 times as it sits on my back up rifle. I’ll take $2250 for it. (On the foundation stock in the pics)

It has been wrapped their whole life’s.

I will sell the rings/mount for extra if needed.

The price’s is shipped, but add $40 for insurance is on you if you want it.

Payment by PayPal (F&F only), Zelle, Venmo, Apple Pay, or good ole snail mail.

Here are some trades I would consider:

2011 9mm pistol

Springfield xd xdm (9mm)
Berger 7mm 180 gr hybrid’s
Berger 7mm 175 elite hunter
7mm Carbon blanks 22” or 24”
H1000
Rl26
30 foot’ish toyhauler

Thanks,
Jay