I picked up a couple of your PLx-C Novas and wondering what barrel length and ammo (both 308 and 5.56) the BDC drops on the reticle will work OK with. There's no chart for this in the manual like you have your other reticles. Thanks!

For sale is a Zermatt Arms TL3 short action with a standard 308 bolt face (0.473"), 20 MOA rail, AICS magazine cut, medium tang, and Competition bolt knob.

This is being sold as used since it was mocked up as a test build but never fired (ended up going with the titanium version to save previous grams). It will include the original packaging.

$1250 shipped. SOLD!

Kicking around the idea of doing a build in 7-08 for the wife. Mainly hunting whitetail, hogs, yotes, etc... but she is also showing an interest in shooting these days and going with me sitting behind my 6.5CM. Most of the time shooting steel and paper out to about 600 or so. I am thinking a Defiance Ruckus in Medium length action and pairing it with a Proof Carbon 22" 1:8.4 twist and slapping it into a lightweight adjustable carbon stock.

I was hoping to get some feedback from you guys on my choices. Also don't quite know what final coating to go on this rig when done or to just get the action in black nitride when I order it and leave the proof as is. Still in the planning phases of this for now but I don't want it to be too damn heavy for her to carry in the deer woods.


Thanks in advance.

Custom-built 6mm ARC gasser, all top quality components with little use on them. 16" barrel makes for a great, nimble build with or without a suppressor. Consistent hits on small plate at 1,000yds with factory ammo, even with the relatively short barrel. Sub-MOA at 100. This thing is awesome and a lot of fun to shoot and reload for, just thinning the herd and the cartridge count. Loads of spare and accessory parts included.

Rifle Specs

• Seekins SP223 gen2 lower
• Seekins IRMT-3 upper
• Seekins SPR-3 12” Rail
• Proof Research 16” SS barrel, round count ~300
• Superlative Arms .750 adjustable gas block (set screw model)
• Spike's Tactical melonite rifle-length gas tube
• Rubber City Armory 6.5 Grendel BCG
• Radian Arms Raptor charging handle (ambi)
• Triggertech Duty 2-stage, 3.5lb pull, curved shoe trigger
• JP silent captured spring
• Magpul PRS lite stock
• Aero Precision carbine length buffer tube
• Aero Precision end plate/castle nut
• Seekins lower parts kit w/ ambi safety selector
• LaRue Tactical A-PEG Grip

Parts/Tools

• 12" ARCA rail (keymod)
• RRS 2.5" ARCA rail (keymod)
• BCM 3" Picatinny rail section (keymod)
• New/unfired complete 6mmARC bolt assembly from Maxim Firearms
  • https://www.maximfirearms.com/online-store/complete-6-5-grendel-bolt/
• Manson Go and No-go gauges for 6MM ARC
• Mags (one each of the following, 10-15 rounders):
  • Amend2
  • ASC
  • Duramag
  • AR Stoner

$2150 $1925 shipped for everything
PayPal F&F with no notes or Venmo, will ship FFL to FFL

DM me if interested, thanks!

I just mounted my scope recently, despite some hiccups I think I have it level, but the process made me wonder, why hasn’t the industry made it simpler?

Why must scope tubes be round on the outside? Why not have a machined spot that would interface directly with a scope mount so it would be level the first time every time without having to mess with levels and plumb bobs? Is there something I’m missing?

I saw a few old military scopes that were like that, flat on the bottom. Others that even had the bases machined right in to the tube itself. It seems like a smarter system. Why can’t a modern scope come with an integral picatinny mount for example? Or just be machined flat on the bottom and fit with matching shaped rings?

New to this, I have this bergara rifle that I bought a new ridgeback stock for and since I changed it . My grouping has gone to shit and some of my bolts are coming loose. Is the gap between the barrel and stock too much that the vibration is causing this ?

Looking to sell my Pulsar Thermion XQ50 thermal with Larue QD mount. No blemishes and image is great through the scope. Comes with all the original accessories and case. $3000 OBO.

Selling a Leupold VX5-HD 3-15X56 CDS-ZL2 with the FireDot 4 Fine reticle brand new in box. This VX5 is a little more uncommon with the Mils turret and fine firedot reticle. Would make a great long range hunting scope if you already shooting in Mils. $1400 OBO

As the title says, looking to buy a Huxwrx muzzle device for an SR-25

I have always been impressed with my Hornady Precision Hunter ammo for my 270 Winchester, but this past weekend I shot with my brand new Garmin chronograph. I was a little disappointed with the spread on velocities in each of the shot groups I took, but I was most shocked seeing a difference of 100 fps between two different lots in the ammo I brought with me. Has anybody ever seen anything like that in their use of precision hunter specifically?

As interested as I am in longer range shooting and hunting, I recognize that standard deviations and differences between lots will be larger than the folks out there loading their own ammo. But that’s just way more than I was expecting!

While I’m at it, anybody have experience with 270 Winchester in federal premium? I guess it doesn’t really matter the caliber, but now I’m questioning whether Precision Hunter is the best load for what I’m trying to do? Or is this just a fluke? I want the best consistency I can get until I jump down the reading rabbit hole…

Good condition, works just like it should, needing to get my house fixed up to put on the market, 615 shipped

Hello Fellow Reloaders

New to this site. Long time shooter and reloader.

Have built several PCC's. Most are 16' barrel, 9mm with blowback 9mm bolt

Interested in in hearing from any who have experience with CFE-P reloading for PCC's. I'm hoping that with a slightly slower burning powder I can achieve higher muzzle velocity in the longer barrels.

Thanks in advance for advice

BubbaJoe33

I’m having issues posting in the bst section. When I go to upgrade my account it says I’m already upgraded. And when I hit post, the only option it gives me is for commercial sales. Any tips? Thanks

Looking for a couple Kreiger 22 Rimfire blanks. Let me know what you have

For sell is a 224 Valkyrie 22inch 6.5 twist Wilson Combat Super Sniper barrel, that’s thread 1/2x28. I purchased the barrel from a hide member a while back, whom fired 300 rounds through the barrel. The OP claimed 3/4 moa from the barrel, but I am not sure as I never got around to using the barrel.

- Wilson Combat barrel, gas block, and tube
- Matched bolt head ONLY (bolt carrier group not included)
- 10 round magazine

$sold

Have three units for sale:

Super Hogster - R 35 - sold

Hogster - R 35 - sold

Hogster - R 25 - sold

All three work great. I used them all last weekend in south Texas and took down 4 pigs using them.

I shoot gray ops scope mount and I’ve always used the send it mounted on the scope mount. When I got the crush it timer I couldn’t figure out where to run it on my rifle. I found using Velcro was the best but not good. I’ve seen a few 3d printed mounts but I feel they would not hold up to prs. I spent about an hour on a Bridgeport today and came up with this. It’s aluminum and super solid.
It’s not perfect but it’s good.

Crye precision gen 4 ranger green combat top and pants. Work a few times but in like new condition. Shirt is a large and pants are 34. $250 shipped for the set PayPal ff or please cover fees.

Scored a rare one this week. A friend said he had a buddy that had one on his CZ .22 after I told him I was searching 1 of 3 different scopes. He called his guy which had removed it actually for a newer scope. Got it for a good price. No book or box just scope. Has the dot crosshair reticle. Which reticle did the M40a1 scopes have?

Lot of kids these days have a warped world view. Life isn’t just making tiktok dance videos or whining about Trump in their reddit safe spaces. Hopefully, they learn something going forward in life.

Edit: A lot of kids (especially country side and small towns young men) are embracing Christian conservative values, masculinity, and the nuclear family structure. But a lot of urban kids, especially young women (including small towns) are struggling with pretty much everything. I understand that it’s not their fault but America is one place where efforts do pay off and they need to acknowledge that. I guess the MSM and culture isn’t helping bring this change at all.

Looking for a Minox ZP5 5-25. Was about to pull the trigger on one here when the gentleman decided not to sell. Still looking for one. Let me know what you have.

$120 Shipped

Curious if anyone is shooting or have tried the Proof 22 rim fire barrels and how they shoot?