Mk22 Scope mount

[Zigjib]

G'day;
Just looking to clarify some details on the Scope Mount used by the Mk22.
It's the Nightforce Ultramount I believe, in FDE with the RAP-i mount.
But I'd like someone to clear up for me;
What height is is? 1.54" or 1.93"?
Is it 20 MOA bias or 0MOA?
These are pretty expensive so I don't want to get it wrong.
Thanks
Carso

 

[Trigger Monkey]

It's probably the NF A696, 1.540" height, FDE, 0 MOA. I haven't seen anything to really confirm that but from the pictures I've seen it makes the most sense. The 1.540" height for alignment with clip on NV or thermal devices and the Mk22 already has 10 mil built into the pic rail so adding another 5.8 mil on top of that could create issues. I think getting that model is a pretty safe bet.

 

[Zigjib]

It's probably the NF A696, 1.540" height, FDE, 0 MOA. I haven't seen anything to really confirm that but from the pictures I've seen it makes the most sense. The 1.540" height for alignment with clip on NV or thermal devices and the Mk22 already has 10 mil built into the pic rail so adding another 5.8 mil on top of that could create issues. I think getting that model is a pretty safe bet.

that's what i was leaning towards as well for same reasons.
Just didn't want to make assumptions.
Cheers bud

 

[longshot2000]

Got it all assembled for you, complete with USASOC lasers numbering and torque limits

Mk22 NF Scope Mount

shameless promotion.

 

[Zigjib]

Got it all assembled for you, complete with USASOC lasers numbering and torque limits

Mk22 NF Scope Mount

shameless promotion.

I appreciate it bro, but i ended up getting the 0 MOA version. Wish i had've seen this first.

I'm after the PSR mount for the Mk13 Mod7 and the Raptar mount for it if you got it!

Cheers mate

Carso

 

[ilikebmxbikes]

I appreciate it bro, but i ended up getting the 0 MOA version. Wish i had've seen this first.

I'm after the PSR mount for the Mk13 Mod7 and the Raptar mount for it if you got it!

Cheers mate

Carso

The PSR mount is a larue OBR. U can add the divingboard cap to it if you can find it. The other option are OPS AWP rings.

 

[xxflyingturtlexx]

The PSR mount is a larue OBR. U can add the divingboard cap to it if you can find it. The other option are OPS AWP rings.

@ilikebmxbikes off topic, still have the 1M?

 

[ilikebmxbikes]

@ilikebmxbikes off topic, still have the 1M?

i do - gonna sell soon though - keeping the other bmws

 

[RogueFighter848]

I have purchased a MRAD and a ATACR 7-35. I plan on getting a ATACR 4-20 for my next rifle as well for a 5-25 for a rifle following after that. I am looking to get Geissele 34mm mounts, but I can't find a clear answer in regards to gets the normal mount or the extended version.