Accuracy International AT-X

[chili77]

Hello there.
I hope you don't mind me having a few questions.
The AT-XC Pro/Comp model differs from the standard only in the long bridge, brake, folding hinge and rear grip. Is that correct?
Do you like the standard AI brake?
Would you be so kind to measure the distance between Picatinny height and barrel or bridge for me. I want to know the required height of the scope rings.

thank you

 

[lennyo3034]

Has anyone gotten hands on the AT-XC and can speak to how much different the bolt lift is?

 

[smarcus]

will it be possible to take the forward rail and top piece off to keep it easy for me to clean, plus get low sight over bore?

I'm still buying it and I'm definitely not buying another forend piece, just hoping for that kind of money it's configurable like Legos and you've selling me all the good parts out of the gate.

Yes, you can take the bridge off.

 

[hafejd30]

Anyone played with action screw torque to see if it makes a difference?

 

[Bart Weemaels]

Rail and some hoptics stuff came in. Does hit though. I’ll have to sand a little bit of the 20 MOA rail.
View attachment 8047117

View attachment 8047121

Hi, what 'wrap' did you use for your scope ?

 

[5RWill]

Hi, what 'wrap' did you use for your scope ?

Ranger Wrap Custom Cut Optics Wraps.

Please note: Wrap must be user trimmed for use of flip caps and for variations in scope mounting positions. Looking to protect your expensive optics and tactical gear? Precision pre-cut adhesive backed wrap. Peel and stick application. If you can apply a sticker, you can install these wraps...

www.area419.com

 

[Bart Weemaels]

Scored an AI 6.5cm barrel and NF Megamount. Will be headed to gunsmith soon for the chassis chop.
View attachment 8320228
View attachment 8320229

HI, is this the Dark Earth Color ?

 

[Bart Weemaels]

Ranger Wrap Custom Cut Optics Wraps.

Please note: Wrap must be user trimmed for use of flip caps and for variations in scope mounting positions. Looking to protect your expensive optics and tactical gear? Precision pre-cut adhesive backed wrap. Peel and stick application. If you can apply a sticker, you can install these wraps...

www.area419.com

Thanks a lot !

 

[amwuk]

Has anyone else found the button on their AT-X hinge seizes when the buttstock is locked out, and can't be pushed in without using some kind of tool? Mine seems to seize up whenever I've been using the rifle, meaning I'm normally unable to just press the button with my thumb and fold the stock when at the range. The only way to release it is to give it a tap with a small nylon hammer when I get back home, then it moves freely again.

I've also got an MDT ACC chassis and Tikka TAC A1 that both have folding stocks, and have never had a similar issue with the buttons on those, so was wondering if anyone with an AT-X has also had this issue and found a way to fix it?

 

[mark5pt56]

It may be a tight mechanism, try putting oil on the contact points and open/close aggressively a few times, clean it and it should be ok.

 

[Dr. Strangeglove]

I've had a similar issue with my AT but not quite as bad. My AT-X and AX don't have that issue at all.

 

[Dogmatrix]

Out of interest anyone have some JAM measurements for ATX, I've got a series one and wondering what sort of variation is out there.

DM

 

[bnaples]

Finally got my cans approved and got it zeroed.

 

[bnaples]

My 16yo kiddo putting it down.

 

[xxflyingturtlexx]

View attachment 8471665
My 16yo kiddo putting it down.

Same; my 16 y/o (i married young)

 

[bnaples]

Im gonna have to break out the krylon.....

 

[SFree]

View attachment 8471665
My 16yo kiddo putting it down.

16?? What are you feeding that kid? He’s bigger than the background…

 

[bnaples]

I am not a small guy...but he's getting to a point that he is towering. My stepson. I tell him all the time "you are big but soft, don't test me". Good kid. This is from a 1911 get together last year.

 

[Nostradumbass]

Same; my 16 y/o (i married young)

View attachment 8471799

Hey dude!
I recognize that rifle from shooting a PRS match with you in South Texas last month.
It was sure hot on a fat boy!

 

[bigfoot750]

Anyone cut their forend down for a 16in barrel like the le model. Do they sell a replacement forend/backbone

 

[xxflyingturtlexx]

Hey dude!
I recognize that rifle from shooting a PRS match with you in South Texas last month.
It was sure hot on a fat boy!

Right on. I think there is an stx match next weekend.

 

[Nostradumbass]

Right on. I think there is an stx match next weekend.

Yessir….I can’t make it, but I’ll be there on the 31st for the night shoot.

 

[Nik H]

Ranger Wrap Custom Cut Optics Wraps.

Please note: Wrap must be user trimmed for use of flip caps and for variations in scope mounting positions. Looking to protect your expensive optics and tactical gear? Precision pre-cut adhesive backed wrap. Peel and stick application. If you can apply a sticker, you can install these wraps...

www.area419.com

I have been thinking of trying these. Have you ever removed them? Does it leave a mess due to the epoxy they use?

 

[5RWill]

I have been thinking of trying these. Have you ever removed them? Does it leave a mess due to the epoxy they use?

I haven’t removed them but i think it would. Just looking at it where i didn’t meet it flush i think it will. Nothing an acetone wipe won’t cure i don’t think.

 

[xxflyingturtlexx]

I have been thinking of trying these. Have you ever removed them? Does it leave a mess due to the epoxy they use?

I spray paint mine but if the optic is not cerakoted from factory you will be fine. Even at that. You can use mild glue remover at worst.

 

[carbonbased]

I have been thinking of trying these. Have you ever removed them? Does it leave a mess due to the epoxy they use?

Hey Nik, there was some discussion about that stuff on the OG AI thread. Start here and read that whole page.

Accuracy International Picture Thread

Do you guys keep 2 spare bolts for all your other rifles? Who's running anything but an ai? Jk Yes I always keep spares of hard use/critical parts. Never had an og trigger fail but I got 2 spares. I work in mfg... I understand ai has said they will maintain their supply chain but... I also...

www.snipershide.com

I guess people hate the stuff. People talked about some Scapa (not Scarpa) tape that I guess the Brits used on their AW’s and apparently still use.

 

[Nik H]

Hey Nik, there was some discussion about that stuff on the OG AI thread. Start here and read that whole page.

Accuracy International Picture Thread

Do you guys keep 2 spare bolts for all your other rifles? Who's running anything but an ai? Jk Yes I always keep spares of hard use/critical parts. Never had an og trigger fail but I got 2 spares. I work in mfg... I understand ai has said they will maintain their supply chain but... I also...

www.snipershide.com

I guess people hate the stuff. People talked about some Scapa (not Scarpa) tape that I guess the Brits used on their AW’s and apparently still use.

Thanks! I will read it.

 

[96C]

 

[Nik H]

That's absurd. View attachment 8483724

Reminds me of the sword strap on from Seven.
View attachment 8483727

Works well

 

[blbennett1288]

This made me laugh way too hard

 

[D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷]

This made me laugh way too hard

View attachment 8529524

Finally someone took it to sharpie levels

 

[bnaples]

 

[bnaples]

 

[Safety_3rd]

This made me laugh way too hard

View attachment 8529524

I don’t get it?

 

[geek65]

I don’t get it?

It's an AI AT-X, however, someone has written Ruger RPR in pen on it.

 

[Safety_3rd]

It's an AI AT-X, however, someone has written Ruger RPR in pen on it.

I mean I got that far But what’s the intention? I understand it’s a joke but I don’t get what makes it funny.

 

[geek65]

I mean I got that far But what’s the intention? I understand it’s a joke but I don’t get what makes it funny.

I thought that was it,???

 

[carbonbased]

I mean I got that far But what’s the intention? I understand it’s a joke but I don’t get what makes it funny.

It’s just a juxtaposition joke plus poor form (purposeful in this case).

Like not just slapping a Pinto badge on a Porsche 911, but lazily scrawling “Pinto” on the hood lol

 

[BurtG]

Seems napoleon dynamite style humor. (So not )




No new atx phots to add. Tbac can still rolling around in back of my s box full of clr

 

[carbonbased]

It’s just a juxtaposition joke plus poor form (purposeful in this case).

Like not just slapping a Pinto badge on a Porsche 911, but lazily scrawling “Pinto” on the hood lol

I should add it also has a bit of a “flex on the poors” vibe too.

Like, “What homie? Yeah I shot a 2” group at 800yds. Just a RPR. Fundamentals. Git gud son.”

Of course the rifle is $4k-$6500 or whatever.

Talking about how a joke works sure drains the life out of it lol

 

[Safety_3rd]

Yea I am reading it as "I'm rich bitch... with my gangster ass At-x, and rich enough that I am willing to say f*ck resale value and I am going to tag my rifle with "ruger" to relate to the poors... I think we are all on the same page lol. I am just not baller enough to intentionally deface my shit with Ruger. I mean dont get me wrong, I will draw a dick on anything... but I am not associating with a Ruger lol.

 

[shoot4fun]

Maybe someone is inferring that the RPR and the AI AT-X are both "Factory" rifles?
Kinda like the 22LR matches that tell you what factory rifles are not really factory rifles in their eyes.

 

[Islas82]

So how many people are making the jump from X to XC?

 

[4O6shootist]

You sure as F should be able to run production class with an atx! Throw a tangent on there too! The talent pool is pretty damn deep at a national level two day match, the equipment you're running is NOT what's getting you a trophy or points. Alwine shoots a fn savag̃e for Christ sake!

 

[LeftyJason]

Yea I am reading it as "I'm rich bitch... with my gangster ass At-x, and rich enough that I am willing to say f*ck resale value and I am going to tag my rifle with "ruger" to relate to the poors... I think we are all on the same page lol. I am just not baller enough to intentionally deface my shit with Ruger. I mean dont get me wrong, I will draw a dick on anything... but I am not associating with a Ruger lol.

Ruining the resale value? Ha ha ha ha ha.

Take something anodized. Write on it with sharpie. It will be gone with either alcohol or acetone.

 

[blbennett1288]

I don’t get it?

Many people who have never seen an AI, think it is a Ruger RPR.

 

[jbell]

Many people who have never seen an AI, think it is a Ruger RPR.

This has actually happened to me several times. I only wish I could see the look on my face when it occurs…

 

[Part Timer]

This has actually happened to me several times. I only wish I could see the look on my face when it occurs…

Something like this, I’d imagine.

 

[Nik H]

Many people who have never seen an AI, think it is a Ruger RPR.

I get that or is it an MRAD when shooting my MC

 

[PlinkIt]

The RPR label was what someone thought it was in a blind bolt running test....