Does anyone know where to get this action chamber brush individually? I can't find a substitute for it for the life of me. 3/4" long bristles, 6" in length. I can find pipe cleaners, but nothing made of brass; they're all steel. Anyone got any ideas? At this point I'm wondering if this is a brush made exclusively by AI.
Last edited:
Hey man, just so you know I wasn’t making fun, I actually like that thing! I have some English camera bags that use that fastening system; it works well and is pretty much silent to operate.
What’s on the back, how’s it attach to a belt? Will it fit a Gray Ops BR mag (12 round)? They are 4.1"H x 3.06"W x 0.94"D.
BR/Dasher AW Magazine
BR / Dasher AW MAGAZINE DISCLAIMER: PLEASE READ BILLET AW MAGS will only work with actions that have an AW Cut. Ask your action manufacturer if you are not sure. Not compatible with the AW cut of the following actions: Big Horn / Zermatt TL3 Terminus Zeus Curtis Vector Our Billet AW...
grayopscnc.com
If you take off the QC sticker, you won’t need the weights.
Just always left it on there
I’ll take it off
Don’t give into peer pressure sir! You’re an AI owner! You don’t give into peer pressure because nothing can pressure you!!! You’re a master of the range. A heroic god amongst loser mortals!!! A monster that can’t be stopped by bolt lift tension and proprietary parts!!!!Just always left it on there
…
But if you don’t, everyone will continue to laugh at you in the private AI Owner group chat.
@CollarChoke received my thumbshelf today, just in time for a match tomorrow.
Attachments
Has anyone ever seen a metallic silhouette handgun/long range pistol AXMC before?
It’s popped up a few times at Bisley in the UK but not so much lately.
It’s popped up a few times at Bisley in the UK but not so much lately.
@Mr. F or @blbennett1288 please pick up the light ai courtesy phone
If I did one again it would a fluted as hell 3b steel bartlein for starters for a barrel. Unfortunately probably no can.
My AXSA’s all weighed right around 17.5lbs with 5-25 S&B’s, Harris or TBAC bipod, and TBAC Ultra 7 so it’s doable with taking weight out of the optic and barrel, but you won’t be running a MDT triple pull or anything and making weight and it will be insanely ass heavy.
I’ve got the wheels turning on a project that should net an AI SA rifle with Proof CF barrel in the 8-9lbs range sans optic and accessories and actually balance out specifically for a hunting or NRL hunter rifle. I’ll be posting a thread in the coming weeks to gauge interest once all the details are ironed out.
I know @blbennett1288 was working on making his AI for NRL Hunter. I wonder if he's achieved that yet?
How many times is this gonna get asked?
Anyway, simple to do with a AT-X running a 3B and a light scope/mount(has to be cut to about 23” max for a .750” shoulder at least for a bartlein)
No buttpad and obviously no hex key…
MDT Double
Theorem L
Picture is about .25- 5 pounds heavier than itll be after swapping some of the rear hardware and grip, ect.
Awesome, thanks, looks like the axsa weighs roughly 2lbs more than the ATX “base weight” so a similar setup should work. Appreciate it!
ATX as pictured 16.32#
Remove TT -3.49#
That puts you at 12.83#
That’ll allow you to run a 36oz scope with 6 oz mount and still have over half a pound to spare.
If you go with a 30oz scope you can run a double pull.
Obligatory NRL Hunter picture from Steel City
Remove TT -3.49#
That puts you at 12.83#
That’ll allow you to run a 36oz scope with 6 oz mount and still have over half a pound to spare.
If you go with a 30oz scope you can run a double pull.
Obligatory NRL Hunter picture from Steel City
Only way of rolling with the AX is using a CF barrel. I tried that too.
Ill see id if i can find the pics of when i messed with the AX tonight
Wonder how much light the C is vs the regular ATX
Outfitted like that (no weights) theres no way in hell i can get my ATX under 16
Here's a more accurate look at it. I was a little off on the first try. 18.5lbs as pictured, not the most accurate scale keep in mind. Could save some weight taking off butt pad, full length forend bridge, and the riser with red dot.
Last edited:
Just under 16lbs for first NRL Hunter. Took 2nd for Teams #ifyourenotfirstyourelast
PrePro AT-X. 24” proof carbon barrel, 1.2” straight bull (cuckless). APA Gen3 brake. TT735P, Badger C1 MAX.
Short Forend bridge (for looks). TBAC bipod.
No bag rider or butt pad.
**Had to crop it out as full pic was too large a file to post (gayness)**
PrePro AT-X. 24” proof carbon barrel, 1.2” straight bull (cuckless). APA Gen3 brake. TT735P, Badger C1 MAX.
Short Forend bridge (for looks). TBAC bipod.
No bag rider or butt pad.
**Had to crop it out as full pic was too large a file to post (gayness)**
That would be great, I figured I would need a CF barrel. I already have the AX so getting an AT-X just for this would be a last resort lol. Hoping the config is possible with the AX as it is more or less.
I would do a fluted 3b over a carbon every time
Well chaps, a few weeks ago while home sick with covid and getting a bit too deep in the ol' bourbon stash here at home
I decided to get on Gunbroker and see if any cool auctions were ending soon. Staying home from work turned out to be a net financial loss in more ways than one. Well worth it though, this is my absolute grail rifle.
Its a pleasure to be the new owner of this Arctic Warfare Super Magnum. Photos taken while my fiance is at work and doesn't realize this is a new rifle in my collection (lol). Its been very hard to keep this from you guys while I got all of the little things together on it. A big thanks to @SAS_Sniper and @HKSniper11B for helping me find some parts.
On a more serious note, if anyone has leads on the AI Simrad L115a3 scope mount, please reach out.
I decided to get on Gunbroker and see if any cool auctions were ending soon. Staying home from work turned out to be a net financial loss in more ways than one. Well worth it though, this is my absolute grail rifle.
Its a pleasure to be the new owner of this Arctic Warfare Super Magnum. Photos taken while my fiance is at work and doesn't realize this is a new rifle in my collection (lol). Its been very hard to keep this from you guys while I got all of the little things together on it. A big thanks to @SAS_Sniper and @HKSniper11B for helping me find some parts.
On a more serious note, if anyone has leads on the AI Simrad L115a3 scope mount, please reach out.
Last edited:
Re: Making NRL Hunter weight
Pretty soon you duders are gonna be running around with just a debonded AIAX barreled action, iron sights, and a dirty 1988 IKEA seat cushion.
Pretty soon you duders are gonna be running around with just a debonded AIAX barreled action, iron sights, and a dirty 1988 IKEA seat cushion.
Last edited:
Do you think drilling speed holes into the seat cushion will make it sub 12 for Open Light?
U read my mind! I think it just might!
I’m working right now on a 3D-printed speed-hole jig just for the ‘88 IKEA SMÖLBÅLS cushion!
Missed your chance to mill in some erect dicks to keep it AI themed.
10.7 lbs without scope, surpressor, and bipod is a light as I've gotten a 22" 3B contour AI without cutting into material. Weight was mostly from side panels, spigot mount, and sling mounts. With an AMG, rings, caps, and TBAC Ultra 7 and its around 13.8lbs
“Add lightness”I'm going to start selling helium filled fake weights to the NRL Hunter crowd
I wish I could pay this guy to do videos like this acting out the discussions we have here.
-Stan
-Stan
I knew it!
Do you shoot with it this way? Tell me you’re not joking. Please tell me you’re not joking!
That thumbhole grip now somehow looks like the winged foot of the Greek god Nike.
Yes I only have one bolt gun so this has been my main setup for the last year or so. I got bit by the idea of stripping as much weight as I could off my AT for hunting.
I think between shortening and fluting the barrel to 16", and not using the steel cheekpiece hardware it would be possible to take off another lb. Take off another 0.5lb if I downsized with a 19-21 oz optic like a NXS 2.5-10, shcmidt klassik, or March 3-24x42.
Removing the sidepanels does make the foreend much less comfortable to hold. The velcro tape helps.
I think an AXSA would be even lighter if you take the fore-end off and run entirely off an arca adaptor on the chassis body.
I think I’d just roll a savage or Ruger American for hunting before doing that to my AI
How about some 22LR love
West Michigan Cerakote, Jurassic Park, Anschutz 1727F, RimX
West Michigan Cerakote, Jurassic Park, Anschutz 1727F, RimX
Last edited:
What’s running the bolt on the 1727 look like. Is it pretty smooth and do you naturally put your thumb on the back of the bolt while shooting?How about some 22 long rifle love
West Michigan Cerakote, Jurassic Park, Anschutz 1727F, RimX
View attachment 8496376View attachment 8496377View attachment 8496378
Once again. If you want to NRL your morels have to be flexible
