Well bad news it seems the discontinued the 223 CTR in the US. Beretta being Beretta
You smoke a deer yet with my old AI?!
You smoke a deer yet with my old AI?!
Not yet. The OG has been stacking them
I have a bolt at black canyon being converted for WSM. It’ll be killing deer next year as a 300 WSM
Any Tikka can be a CTR Tikka with a CTR mag and the right stock (plus the temp removal of that little spring).
I own a CTR Bravo with 223 & 204 barrels. Just ordered the X-ray rear end as I will get along with that better (W3 owner).
Rules:
Last edited:
The amount of tikka cope in this page.
(I like tikkas too)
Some of us are Poors due to certain situations and Tikkas work for the time being until we can once again have an AI
Last edited:
I love the CTR magazines too, feed like butter in all cartridges I've used.
Unlike many custom actions and AICS mags I've seen at matches.
How hard is it to swap them barrels on the Tikka? What did you do strip down a 223 action?
It’s almost as if company-manufactured platforms, AI + AW / Tikka + CTR, work better than a bunch of things cobbled together.
Whoulda thunk it?
-Stan
What would you like to know? I try to keep this thread on AI related items mostly but
My most accurate one wears a WOA 18 SPR barrel. Among Geissele ssa-E trigger and forend etc. She’s a tack driver with Hornady steel match ammo.
Needed a new mount, so I picked up one of the newer 419 one pieces. Pretty happy with it so far. Seem like quality rings.
I like how they leave the inner part of the rings raw; which is smart because the coating always wear out under recoil, and the raw material has better surface mating with the scope body. I have one of those sitting for the next project.
i was referring to a mental state rather than financial; oh trust me, i am in those “some of you” group very often
I've heard a few times that the AXMC mag adapter (P/N: 27268) sucks but never why. Is there a lot of slop when it is in the gun with a mag? Is it just annoying to have to keep track of another part? Does it not feed? If so, what sort of malfunctions occur?
Maybe others will have more info. When I had my axmc it ran 100% with the mag adaptor in, but it was just another piece of the kit to keep track of. Not a huge issue, I had a spot to keep it with the mags, but nonetheless it was another thing to lose.
Never have had an issue with mine running 6.5CM. It clips in like a bank vault meaning there is zero play whatsoever. As another poster commented, it’s just another piece of kit to keep track of. Other than that, it works flawlessly. That is why I said earlier in this thread that if I was starting from scratch I would get the newer ASR mags because that would alleviate the need to even have an extra piece of kit to keep track of. The mags work in the adaptor flawlessly from my experience and I have 5 308 mags that I alternate between.
Last edited:
AXMC doesn’t need the adapter. The new mags are made the same as the AXSR mags and require no adapter
At least the mags I used for 6.5 in my AXMC
If you want to share short action mags with another rifle then the adapter would be needed. But there’s specific short action round mags made for the platform that I used
I know it doesn’t need an adapter. I already have the mags and the adapter and it functions flawlessly. If I didn’t have everything already I would just get the ASR mags. Just don’t see the need to get rid of what I got when it functions as intended.
I was more informing anyone reading this as it was stated above they heard it sucks and one more part to loose
Just informing that it’s an unneeded part in todays AXMC mags
Ok. Misunderstood what you were getting at. Agreed. Buying now, skip the adapter just buy the ASR mags and you are good to go.
Thankfully you are right otherwise us LH people would be fucked again. AI never made a LH adapter
Shoulda switched to right handed. I did when I was 15 when I realized everything is made for right hands.
Also. If anyone wants to trade a axsr or axmc minus cash towards a Raptar SES. Hit me up
Your brain is hard wired…switching creates issues…
He has lots of issues. He can break anything just be staring at it to start
Besides EO and MH (neither of which have em in stock), who would be a good vendor for grabbing an AXSR Elite Sand forend?
I could snag a different color but wanted to ask the experts here first...
My 15.73 axis Dremel is looking to get some cutting time in and I want to cut it down to 13" for a 16" barrel to fit. So figured I'd grab a spare to have chopped.
I could snag a different color but wanted to ask the experts here first...
My 15.73 axis Dremel is looking to get some cutting time in and I want to cut it down to 13" for a 16" barrel to fit. So figured I'd grab a spare to have chopped.
Is there an “Accuracy International Thumbhole Stock Master Race Thread” I’m missing somewhere?
Every AI thread is a thumbhole stock master race thread
However some are still lying to themselves and think they’re happy without one
Smilin' and Dialin' with the AT 308 today.
Every time I see the old girl I die a little in the inside
Is that the older, darker green or the newer, lighter shade?
Can’t tell from the picture.
Rattle can over fde rears and newer green front skins. There are virtually 0 rifles I'm scared to touch with the rusto lol.
PRS UK Finale with my Maven being replaced with a Leupold Mark 5.. waiting for the hate
I also run a Mark 5 on my AT.View attachment 8520532
PRS UK Finale with my Maven being replaced with a Leupold Mark 5.. waiting for the hate
-Stan
