Accuracy International Picture Thread

[beetroot]

View attachment 8532219

Finally finished, managed to convert the fixed AT to folding and get the AW skins on….

Now for a 6.5x47L and 6GT barrel

Where did you find the hinge in the end?

Who you going to get to do your barrels?
There's a few people in NZ with AIs now, it'd be nice to find someone who can start offering prefits, or can at least chamber barrels without needing to send them the rifle.

 

[hafejd30]

Where did you find the hinge in the end?

Who you going to get to do your barrels?
There's a few people in NZ with AIs now, it'd be nice to find someone who can start offering prefits, or can at least chamber barrels without needing to send them the rifle.

Huh? For AT barrels you can order prefits or have them chambered without sending in rifle. Unless I’m mistaken on your question here

 

[beetroot]

Huh? For AT barrels you can order prefits or have them chambered without sending in rifle. Unless I’m mistaken on your question here

Shipping to New Zealand is a problem though.

 

[hafejd30]

Shipping to New Zealand is a problem though.

Ahh yup missed the NZ part up there

 

[beetroot]

Ahh yup missed the NZ part up there

Lol no worries.
There are some places that will import prefit barrels but I think getting them spun up locally will be easier, and probably cheaper in the long run.

 

[Charger442]

I'm on a Vortex budget because all those trips to your mom's house add up...

 

[TheGunPsychiatrist]

 

[hafejd30]

View attachment 8532335

Rem 700
Single stack mags
Fusion Ammo

We need the AICS thread. So him and @BurtG can pic that baby up!!

 

[FUNCTIONAL]

Saw multicam and got excited, then my eyes went up and I threw up in my mouth a little..... reminds me of the clubs back in the day actually.

 

[TheGunPsychiatrist]

Saw multicam and got excited, then my eyes went up and I threw up in my mouth a little..... reminds me of the clubs back in the day actually.

Totally get where you’re coming from! You don't have to like my gun. What mods or setup would you throw on your gun to make it a winner with multicam?

 

[TheGunPsychiatrist]

Rem 700
Single stack mags
Fusion Ammo

We need the AICS thread. So him and @BurtG can pic that baby up!!

.300 Win Mag w/ Kreiger

 

[TheGunPsychiatrist]

My AWM with a GAP chambered 300wm bartlein. Before and after paint.

Sent from my SM-N910T using Tapatalk

Nice Rig!

 

[carbonbased]

Totally get where you’re coming from! You don't have to like my gun. What mods or setup would you throw on your gun to make it a winner with multicam?

Now, I quite like your paint job. Dead serious. And I own a R700 in 204 that I love. So I’m not at all looking down upon you.

And know that it’s sort of a meme here to poor-shame, which most do as a joke. I hope.

There’s a guy here that likes to tweak us by posting a setup like yours just to see who catches it. But he also owns an AI ( the type with an AI action), so he kinda gets a “joke” pass.

Anyway, posting an AI chassis containing a R700 action in this thread is like posting a Tikka factory stock with a R700 action in it in the Tikka thread?

I’m trying not to sound like a dick, but probably failing.

 

[M8541Reaper]

Totally get where you’re coming from! You don't have to like my gun. What mods or setup would you throw on your gun to make it a winner with multicam?

Sir this is the finer things cheese and wine club for the most exclusive of poors.

 

[300_BLK]

Where did you find the hinge in the end?

Who you going to get to do your barrels?
There's a few people in NZ with AIs now, it'd be nice to find someone who can start offering prefits, or can at least chamber barrels without needing to send them the rifle.

I’ll use Murphs Precision Rifles in Marlborough. Will let you know how it goes

 

[TheGunPsychiatrist]

Now, I quite like your paint job. Dead serious. And I own a R700 in 204 that I love. So I’m not at all looking down upon you.

And know that it’s sort of a meme here to poor-shame, which most do as a joke. I hope.

There’s a guy here that likes to tweak us by posting a setup like yours just to see who catches it. But he also owns an AI ( the type with an AI action), so he kinda gets a “joke” pass.

Anyway, posting an AI chassis containing a R700 action in this thread is like posting a Tikka factory stock with a R700 action in it in the Tikka thread?

I’m trying not to sound like a dick, but probably failing.

no offense taken! This used to be my marketing piece years ago when I had my gunsmith shop (also did cerakote and hydro). The only thing stock on the 700 is the action (which I trued) and bolt assy. I could not justify paying big bucks for a custom action when I could fix a Remington out of the box.

I am sure R700's are a dime a dozen in an AI thread. They make a great Chassie. Even better rifles. For some reason I thought this was an AICS thread and not an AI thread. Now that my dysfunctional syndrome has calmed down I see that lol.

 

[Huskydriver]

Thanks guys. I understand now.

If you like the G3 reticle, I think it's a great option. But you do only get one reticle option.

Now back on topic.... What ball ammo shoots best out of an AI?

Ball ammo? Surely you jest sir.......

View attachment 8532335

Ah yea... Let's take a look see here Cletus....
No suppressor check...
Butler Creek caps check....
Caldwell knock off of a Harris bipod... Check...
Miss matched fudd ammo check....
Bolts on the wrong side of the gun check....
Hole in single wide skirt in the foreground check....
No Arken....Fail
No $10k truck with $25k of lift and wheels in view....fail
Possibly could have gotten more multicam per sq in there ....half credit....

Overall score is dependant on proof of back child support in arrears but you got @BurtG POS awm beat by a solid can of colt 45 and a swisher





The fact your trigger is 187.43% more reliable than the axsr......



Solid consolation price

 

[FUNCTIONAL]

The fact your trigger is 187.43% more reliable than the axsr......

Yikes, this was a rough one.... but true....


Yea the rifle looks fine, nothing wrong with it except that it's in here. Scroll back some pages and you'll see it's not picking on you specifically lol.

This is a place for real AIs.

 

[BurtG]

indicating I can pay for any college my children want in cash

Don’t make it too easy for them

Children need the gift of struggle.


Half the problem with this country is kids that haven’t worked at all till they are 18 or in some cases 22 -28
you are molded when you are young.




Throwback Thursday

Still looking for this gun to buy back if anyone knows who felipes Buddy sold it to

 

[BurtG]

Thanks guys. I understand now.

If you like the G3 reticle, I think it's a great option. But you do only get one reticle option.

Now back on topic.... What ball ammo shoots best out of an AI?

Back in the day you could get American gunner for $0.67-80 and sell the brass for $0.25

Stuff was accurate and cheap AF

 

[BurtG]

Can y’all believe when I got my GAPs in AICSs I was torn between gap and AI. I could have a $$$$ AWM instead of the gap I still have lol. Sold the 308. Accurate af but no AI

 

[hafejd30]

If we keep letting this AI but not really AI nonsense infiltrate our minds eventually we’ll be seeing pics of AICS Savage 10’s

At that point it’s time to close the thread as all hope has truly vanished

 

[beetroot]

If we keep letting this AI but not really AI nonsense infiltrate our minds eventually we’ll be seeing pics of AICS Savage 10’s

At that point it’s time to close the thread as all hope has truly vanished

AICS savage is truly the best of both worlds.

Get the classic AI look and ruggedness, exceptional accuracy, at a lower price. Just as good as the real thing.

Top it off with a Mark 5 Leupold in a Spuhr mount, and you'll have a top notch sniper system!

 

[Firestarter123]

If we keep letting this AI but not really AI nonsense infiltrate our minds eventually we’ll be seeing pics of AICS Savage 10’s

At that point it’s time to close the thread as all hope has truly vanished

I actually had an AICS for my Savage 10 way back when MHSA was blowing them out. The chassis was still worth more than the rifle

 

[taliv]

Since this is a pic thread, here’s a pic of the AXSR 300nm (bottom first pic) at a club match in VA today. Hit a cold bore challenge and collected a bag of cash. 4”x8” steel gnome (greenish blob) at 1067 yards from one mountain top to another. $5 for 1 cold bore attempt per match. Based on the amount, there were about 90 attempts this summer and fall.

Two gratuitous fall blue ridge mountains scenery pics.

 

[Aerem]

Buy some cheap asian ammo. It'll match your Vortex.

Can confirm as someone who feeds his AI almost exclusively 140gr AAC ammo.

View attachment 8532738View attachment 8532739Since this is a pic thread, here’s a pic of the AXSR 300nm (bottom first pic) at a club match in VA today. Hit a cold bore challenge and collected a bag of cash. 4”x8” steel gnome at 1067 yards from one mountain top to another. $5 for 1 cold bore attempt per match. Based on the amount, there were about 90 attempts this summer and fall.

Two gratuitous fall blue ridge mountains scenery pics.

View attachment 8532742View attachment 8532740

Well that’s not ugly. Where were you shooting?

 

[taliv]

Well that’s not ugly. Where were you shooting?

https://kettlefootgunclub.org/

Very cool place to shoot. Crappy iphone pics don’t begin to do it justice

 

[FUNCTIONAL]

https://kettlefootgunclub.org/

Very cool place to shoot. Crappy iphone pics don’t begin to do it justice

Yea ima definitely have to go shoot a match here.

 

[BurtG]

View attachment 8532738View attachment 8532739Since this is a pic thread, here’s a pic of the AXSR 300nm (bottom first pic) at a club match in VA today. Hit a cold bore challenge and collected a bag of cash. 4”x8” steel gnome (greenish blob) at 1067 yards from one mountain top to another. $5 for 1 cold bore attempt per match. Based on the amount, there were about 90 attempts this summer and fall.

Two gratuitous fall blue ridge mountains scenery pics.

View attachment 8532742View attachment 8532740

Awesome. Now that’s a different match.

That’s not Majorlands sniper cup is it ?

 

[taliv]

Awesome. Now that’s a different match.

Is that the same place or same match that has a lot of long range stuff. Called soldiers something or the other

Don’t think so. The targets are 400-1100 yards and -6 to -15 deg angle.
I’ve been told that moccasin place that hosts ELR matches is just “the other side of the mountain” but I’ve never been there.

 

[BurtG]

Don’t think so. The targets are 400-1100 yards and -6 to -15 deg angle.
I’ve been told that moccasin place that hosts ELR matches is just “the other side of the mountain” but I’ve never been there.

Finally found the name. Major Land snipers cup.

But your match is cool and nice shooting regardless

 

[M8541Reaper]

View attachment 8532738View attachment 8532739Since this is a pic thread, here’s a pic of the AXSR 300nm (bottom first pic) at a club match in VA today. Hit a cold bore challenge and collected a bag of cash. 4”x8” steel gnome (greenish blob) at 1067 yards from one mountain top to another. $5 for 1 cold bore attempt per match. Based on the amount, there were about 90 attempts this summer and fall.

Two gratuitous fall blue ridge mountains scenery pics.

View attachment 8532742View attachment 8532740

But the gun is on the ground. It can get dirty like that. Half these kids here are still making payments on their Credova accounts. Showing pics like this might encourage them to lower their resale value! Shame.

(Awesome pics though man)

 

[Dr. Strangeglove]

From yesterday's MDPRS finale, come to the dark side of Tac class.

#theyreallyneedtoallow.30-06

 

[stanley_white]

From yesterday's MDPRS finale, come to the dark side of Tac class.

#theyreallyneedtoallow.30-06


View attachment 8532940

Please school me a bit because I am ignorant…

What problems would 30-06 solve for you in this context?

Thank you.

-Stan

 

[Dr. Strangeglove]

.30-06 is cool

 

[taliv]

But the gun is on the ground. It can get dirty like that. Half these kids here are still making payments on their Credova accounts. Showing pics like this might encourage them to lower their resale value! Shame.

(Awesome pics though man)

Just wait til I krylon it…

 

[sidetoss20]

From yesterday's MDPRS finale, come to the dark side of Tac class.

#theyreallyneedtoallow.30-06


View attachment 8532940

30-06 performs way too well for tac… think of the poor 223 shooters. Keep it in open!

 

[FUNCTIONAL]

Saw a dude win with a 300 win mag in open in open once. This was before the prs was big and heavy rifles were the trend. Back when the NRL tried to establish itself in the east.

 

[D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷]

I sit in my paid off home, having driven there in my paid off car, and I put down my financial statements indicating I can pay for any college my children want in cash, so I can go do some DFAT dry fire with my AI AT and my Leupold MK5 5-25x56mm with Illuminated TMR reticle.

Work hard. Save a lot. Buy whatever you want.

-Stan

Spoken like a guy who lives in DC metro.

Oh wait.

Never mind.

 

[Dr. Strangeglove]

30-06 performs way too well for tac… think of the poor 223 shooters. Keep it in open!

Give it the same or similar limitations as .308, say you must use Garand-safe loads or something.

 

[Long Range 338]

Ball ammo? Surely you jest sir.......






View attachment 8532431

Ah yea... Let's take a look see here Cletus....
No suppressor check...
Butler Creek caps check....
Caldwell knock off of a Harris bipod... Check...
Miss matched fudd ammo check....
Bolts on the wrong side of the gun check....
Hole in single wide skirt in the foreground check....
No Arken....Fail
No $10k truck with $25k of lift and wheels in view....fail
Possibly could have gotten more multicam per sq in there ....half credit....

Overall score is dependant on proof of back child support in arrears but you got @BurtG POS awm beat by a solid can of colt 45 and a swisher





The fact your trigger is 187.43% more reliable than the axsr......



Solid consolation price




View attachment 8532429

I find your intimate knowledge of subpar gear to be……. Disappointing

 

[Huskydriver]

I find your intimate knowledge of subpar gear to be……. Disappointing

I mean I grew up with a savage 110 in the trailer across the street so

 

[TheOE800]

Spoken like a guy who lives in DC metro.

Oh wait.

Never mind.

What I could get for this property value out west

 

[M8541Reaper]

I mean I grew up in a middle class trailer across the street so

Fixed it

 

[poptart4YALL]

@Dr. Strangeglove talking about 30-06 but caught him slumming it with 6.5 today.

Can’t talk to much crap, as I’m probably posting a pic of an AI with the cheapest scope in this entire thread.

 

[FUNCTIONAL]

Anyone have a lead on cheek piece thumb screws? Seems everywhere is out of stock or marked discontinued.

 

[beetroot]

Anyone have a lead on cheek piece thumb screws? Seems everywhere is out of stock or marked discontinued.

https://www.sportingservices.co.uk/ would be your best I'd say.
They told me AI was still making parts for the AT/AXSA, a lot of items are showing out of stock but they are on back order.

 

[carbonbased]

@Dr. Strangeglove talking about 30-06 but caught him slumming it with 6.5 today.

Can’t talk to much crap, as I’m probably posting a pic of an AI with the cheapest scope in this entire thread.

View attachment 8533279

Is that a primary arms 4-16 on the middle rifle???

 

[poptart4YALL]

Is that a primary arms 4-16 on the middle rifle???

Shit I wish. It’s an older Primary Arms 4-14x44 with R-Grid Reticle

 

[poptart4YALL]

Anyone have a lead on cheek piece thumb screws? Seems everywhere is out of stock or marked discontinued.

Pretty sure they’re discontinued. I used this from McMaster Carr. They look “okay” and sit pretty flush against the skins.

PN: 92552A447

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com