The Keymod +2 fits the AI keyslot. I briefly used the +2 and had no issues attaching it before deciding I didn't have a use for it and relegating it to the parts bin.
Ah, so @clefairy might be mixing up the name.
I didn’t know about keymod +2…I wonder if they paid AI for “licensing” or if it’s something like they cannot claim it works with keyslot in advertising?
Off to check out Keymod +2!
Ok duh, what I thought was a new gen of keymod is just a (certain?) 2-round quiver for the side of one’s AI. 
All I know is that the little erect penises are patent protected... They are there to remind you of your next customer service experience. 
There's no denying that the lockup and repeatability of Keylock is superior to both Keymod and MLOK but the little angled wankers aren't aesthetically pleasing lol.
I wish I could thumbs up and laugh at the same time to this post. Yeah, the KeySlot is a pretty damn solid setup.
How I'll be running my AI for the 2025 season..
Can't wait for the Gray Ops AW .308 mags!
How the fuck did you score spare bolts.I should be good on spare parts for the foreseeable future once my QD cups that are out of spec get replaced.
ETA: I can't believe that AINA doesn't have any spare flush cups in stock
I have 2 of the grayops cnc 308 mags. They don’t fit in an AT-LE or AT-X. Pretty disappointing for 200 dollar mags.
I had to sand the fuck out of them to get them to fit, and they still won’t reliably feed 6.5 creed which is wild.
Last edited:
I signed up for notifications everywhere I could and pounced when there were a few available mid-2024.
I haven’t seen any available since then.
They do runs of them once in a while. The last run MH, euro and Mountic all had bolts at the same time. I bought two of them. SFP bolts. One is at black canyon customs being converted for WSM cartridges
That’s one thing about AI. They do things in runs. So if you have a wish list then be ready when that item becomes available. The next shipment will likely be a year out or more
MH hooked me up today with my DE skin set. Super awesome to deal with and they carry stuff not listed on the website. So calling them or euro when you are looking for something is the best way to go.
FYI I just ordered 2 cheek piece thumb screws for my second AIAT. I have the AI logo ones on my other and they look much better than the Amazon specials I have on this one I orders skins for. These don’t have logos on them but I don’t care about that
Link for anyone interested. 8 left in stock. I know we had several members trying to locate some a while back. Same 20333 number listed on euros site
Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
www.sportingservices.co.uk
Last edited:
Just a heads up I had fitment issues with that grayops AW in my AT-X and @sneakypayload had issues with it in his AT. Had to sand the shit out of it and they still don’t drop free.
If I can get another bolt to run 6.5PRC in my AT-X I would likely get rid of my AXSR. Going to sign up everywhere for notifications.They do runs of them once in a while. The last run MH, euro and Mountic all had bolts at the same time. I bought two of them. SFP bolts. One is at black canyon customs being converted for WSM cartridges
That’s one thing about AI. They do things in runs. So if you have a wish list then be ready when that item becomes available. The next shipment will likely be a year out or more
MH hooked me up today with my DE skin set. Super awesome to deal with and they carry stuff not listed on the website. So calling them or euro when you are looking for something is the best way to go.
FYI I just ordered 2 cheek piece thumb screws for my second AIAT. I have the AI logo ones on my other and they look much better than the Amazon specials I have on this one I orders skins for. These don’t have logos on them but I don’t care about that
Link for anyone interested. 8 left in stock. I know we had several members trying to locate some a while back. Same 20333 number listed on euros site
Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
They do runs of them once in a while. The last run MH, euro and Mountic all had bolts at the same time. I bought two of them. SFP bolts. One is at black canyon customs being converted for WSM cartridges
That’s one thing about AI. They do things in runs. So if you have a wish list then be ready when that item becomes available. The next shipment will likely be a year out or more
MH hooked me up today with my DE skin set. Super awesome to deal with and they carry stuff not listed on the website. So calling them or euro when you are looking for something is the best way to go.
FYI I just ordered 2 cheek piece thumb screws for my second AIAT. I have the AI logo ones on my other and they look much better than the Amazon specials I have on this one I orders skins for. These don’t have logos on them but I don’t care about that
Link for anyone interested. 8 left in stock. I know we had several members trying to locate some a while back. Same 20333 number listed on euros site
Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
And backorder that shit if you want it! Don’t do notifications!
Yeah, you gotta put all the cash up front, but you didn’t get into AI’s for the financials, didja?
That's my trick for how I got my 2nd ATX bolt. Paid $1k and it arrived 13 months later
May work for you wrong handed people but lefties just wait and wait and wait.
For lefties you can either buy the bolts or the rifle but the laws of AI forbid you from owning both at once.
Re calibrating my thousand yard shot marker target @ 100 yards..
Little light reading i picked up. Taking the AI out again tomorrow and testing loads in all 3 of my barrels.
Seeing the blue and red AT-Xs (I like the new colors even though AXSA's are still master race for short actions) has made me wonder why they have never done a "British Racing Green" version. Seems like an oversight to me. (I know, I know . . . they need to focus on making the rifles and parts available, and not worry about new colo(u)rs. I'm just sayin' . . .)
Aforementioned Master Race:
Aforementioned Master Race:
Double post but pic to make up for it.
Shot the 16.5" 6.5creed, 20" 308 and 26" 6x47L barrels. Confirmed my 6x47 after getting a nasty carbon ring out, groups could be higher, bipod mounting knob loosened up and i didn't realize until after shooting that barrel. The 6.5 and 308 i was doing some preliminary load testing.
Liking the 40.5 and 40.8 on the 6.5c with 140eldm. 40.8 with the 140smk for that load. 308 I'm thinking a nice flat spot at 40.6 and 40.9, plenty of wiggle room. Will rest those more next round.
6x47 is good enough for me. as mentioned with a tight bipod done of those groups should be a bit better. The 10rd without the "flyer" isn't shabby.
Bonus: took the mk12 mod 0 out to try some AAC 77 ammo. For how cheap it is it shoots pretty decent. 1.16" complete 10rd group or 0.84 pulling the 2 oddballs .
Loving the AT more every time I take it out.
Shot the 16.5" 6.5creed, 20" 308 and 26" 6x47L barrels. Confirmed my 6x47 after getting a nasty carbon ring out, groups could be higher, bipod mounting knob loosened up and i didn't realize until after shooting that barrel. The 6.5 and 308 i was doing some preliminary load testing.
Liking the 40.5 and 40.8 on the 6.5c with 140eldm. 40.8 with the 140smk for that load. 308 I'm thinking a nice flat spot at 40.6 and 40.9, plenty of wiggle room. Will rest those more next round.
6x47 is good enough for me. as mentioned with a tight bipod done of those groups should be a bit better. The 10rd without the "flyer" isn't shabby.
Bonus: took the mk12 mod 0 out to try some AAC 77 ammo. For how cheap it is it shoots pretty decent. 1.16" complete 10rd group or 0.84 pulling the 2 oddballs .
Loving the AT more every time I take it out.
They did make a British racing green version.
You may say this is not British racing green, but try to outrun it.
More sustained evidence of a strong legacy AICS thumbhole market that gets ignored by AI.....
36 bids and 70 watchers as of the time of this post....enough said.
Accuracy International AICS 2.0 Chassis Remington 700 LA Stock FDE Skins Magpul | eBay
Accuracy International AICS 2.0 Long Action Remington 700 Chassis – Rare FDE Finish! Here’s your chance to own an Accuracy International AICS 2.0 Long Action chassis in the highly sought-after Flat Dark Earth (FDE) finish.
www.ebay.com
36 bids and 70 watchers as of the time of this post....enough said.
Last edited:
It was a beautiful New England day. Took the AT out for some fun at the range.
Back in 2020-21 $1600 you could buy a transgender chassis with a deployment case and all the shit. I bought four.
I saw the deployment kits and remembered the M40 stock madness circa 2005-6.
I sold one of the two I bought for $400 in 2007 and felt guilty at the time…
MODS, if this is out of line, please notify and I will delete. Also if there is a better place, I will gladly move.
I am curious. On an email site that sends me stuff, auctions, featuring some really nice and antique firearms, There is an AI Arctic Warfare, made in 2003 with a Schmidt and Bender scope, current bid is $7000. Is this out of line? Not selling or buying, just curious.
I copied a picture. Again not in anyway associated with the sale just wondering about the prices
I am curious. On an email site that sends me stuff, auctions, featuring some really nice and antique firearms, There is an AI Arctic Warfare, made in 2003 with a Schmidt and Bender scope, current bid is $7000. Is this out of line? Not selling or buying, just curious.
I copied a picture. Again not in anyway associated with the sale just wondering about the prices
Attachments
Depends on who you ask really. Some idiots think their AWs are worth over 8-9k just the rifle alone. For that kind of money, just spend a little extra and get a ASR. They weren't even that much new and they have less features then the new ones. But for the whole package 7k right now isn't horrible depending on what 5-25 is on it.
Figure $2,500 for the scope and $4,500 for the rifle.
Not a bad deal at all.
Not a bad deal at all.
Based on the AW market today, it's like you're getting the scope, bi-pod, and mount for free.
This is not what I wanted to hear
Was this due to the mag well being too tight or was it mag catch? Wondering if the Vision Chassis will be any different..
I had a good day. So I share.
Accuracy International factory Lothar-Walther 1:12 20" barrel, running Federal LE T308T 168gr 308 (Sierra TMK).
Accuracy International factory Lothar-Walther 1:12 20" barrel, running Federal LE T308T 168gr 308 (Sierra TMK).
* ... with the right ammo, which took me quite some time to find a factory load & round that would shoot this tightly.
1:12 twist is hard to work with. A lot of modern rounds made today will not stabilize properly with it; I currently have a small list of rounds that won't, with shot groups & shot data. And with Applied Ballistic's Stability Calculator now directly integrated into their application, it is easy to see what is and isn't stable. Many rounds are either too heavy, too long, or both, for 1:12 twist. Those that are stable, don't have the reach. Finding a round that can reach 850-1000 yards, and is stable enough to group tightly, has been a challenge. Seeing 168gr TMK perform so well, and that it works well in the Federal T308T factory load -- having great enough velocity of 2603fps from a 20" and 2653fps from a 24" to reach 1000 yards -- has been a real joy to find.
This said, I don't know if the round is spinning fast enough out past 700 yards to group as well as a 1:10 barrel, and I have yet to find out. No one has ever given me a good answer as to what is a solid factory round that that performs well from the AW/AT barrels in 1:12 twist in the US, and this is an affordable and effective round that does. This data was important to share.
So i did some investigation.. they don't work the Vision Chassis either.. I think it's because the feed lips on the Gray Ops mags are longer and extend further towards the rear of the mag as well as the mag catch height being slightly different.This is not what I wanted to hear
Was this due to the mag well being too tight or was it mag catch? Wondering if the Vision Chassis will be any different..
I run 178 ELDX handloads at 2605 in the exact same barrel. Only have shot to 800 as it spends its whole life shooting deer inside 600 yards. But it’s a hammer with those
100 yards - 3 shot groups
440 yards- 3 shots
Last edited:
I can check at some point. Was told it was 1:12 but haven’t ran a rod through it
It’s a LW 20” 7.62 X 51. Were there some 1:10 barrels in LW? I know the bartleins are 1:10
There's a ridiculously good chance its 1:12. Especially as a 2014. But better to be sure. I ran a rod through mine and confirmed.
