AB Quantum / Sig Kilo Gen 2 / and Kestrel 7500X

[Chukwithak]

Just been playing around with the 3 to really figure out the best applications for pairing and each. I really wish you could use the Kestrel and Sig at the same time in ABQ but all is good.

5700X is version 2.2 and ABQ is updated to 3.4.4

A couple issues I'm currently running to @DocUSMCRetired. Currently my when connected to my 5700X, I cant stream wind? The kestrel symbol on the bottom us blue and the wind speeds are grayed out, but no response. 5700 is also in Live.

I also cant hit the LRF icon to pull T/H/P from the Kestrel.

Clarification question, what is "Auto Length" in regards to Bullet Data?

 

[DocUSMCRetired]

Just been playing around with the 3 to really figure out the best applications for pairing and each. I really wish you could use the Kestrel and Sig at the same time in ABQ but all is good.

5700X is version 2.2 and ABQ is updated to 3.4.4

A couple issues I'm currently running to @DocUSMCRetired. Currently my when connected to my 5700X, I cant stream wind? The kestrel symbol on the bottom us blue and the wind speeds are grayed out, but no response. 5700 is also in Live.

I also cant hit the LRF icon to pull T/H/P from the Kestrel.

Clarification question, what is "Auto Length" in regards to Bullet Data?

You need to reboot the Kestrel. Hold the power button while you remove the battery and wait 30 seconds. Then put the battery back in. Make sure you have the PIN system turned off. Bluetooth set to max.

Auto Length is a guestimate for bullet length when you don't know and cant measure them. Usually to be left off.