What are your thoughts on the best precision 1pc 34mm scope mount. I have used nothing but the M brace mounts since they came out. I still like them the best for mounting since they dont twist the scope at all. Im considering giving the gray ops or the area 419 mount a try. Whats your opinion? This will be used on a prs gun.
Best 34mm precision scope mount
- Thread starter Andrew863
- Start date
Both the Gray Ops and Area 419 mounts are top shelf options to use for PRS, but my preference is the MPA BA Mount. Lots of good options on the market. I have a friend who shoots PRS regularly that experienced a cracked ARC M Brace mount a year or so ago.
I like the Seekins/Vortex rings. Seekins also has a new mount that looks a bit chunkier for those big energy rifles.
Just in case all other posts didn't make it obvious, Area 419!
Looks like i'm going to give the 419 a try. I like the looks of the gray ops a little better, but i have also seen the de burring issues first hand on other gray ops parts. The machine work has always been top notch but the last step of getting the burrs off is important. The M brace mounts cracking I have to assume has been fixed, i have never had one Crack and I have 5 along with several of the guys I shoot with. There is always a chance they just had a bad batch of material. I do like how the area 419 has the guide pins to help keep the cap from twisting, and i also like how they make the fasteners in house so they can choose what ever they want. I dont like how the rail clamping portion is moved inside, I just dont care for the looks and I also dont like the raw aluminum, but I get why they do it, I'm just not convinced it is needed. Thanks for all the input.
I have seen someone else on here talking about their tube getting scratched from a 419 mount
I'm not sure if this is what it is, but the raw aluminum will rub off on the tube. Just wipe off with IPA and a microfiber towel and it comes off.
Too many great options to name, unless you are mounting LRF. Don't forget about Seekins, MDT, Badger, Nightforce, GDI, etc.
I found raw aluminum on a tube, came right off with zero marring to the tube finish
I’ve had more than a few 1-piece mounts, but always end up sticking with my old standby/trusty MPA BA mounts. I know they’re not the newest or the most expensive, but they just work and are solid, and them having compatibility with Spuhr accessories has allowed me to tack on my Send-It levels without any fuss, as well as being able to add a diving board for slapping on my Xero or using to mash the gun down into a bag.
If you want beefy and don’t mind a bubble level hanging off the side, I also dig the quality of the Hawkins Precision mounts and that they come with a diving board out of the box (I do wish they offered a version without the bubble level though).
If you want beefy and don’t mind a bubble level hanging off the side, I also dig the quality of the Hawkins Precision mounts and that they come with a diving board out of the box (I do wish they offered a version without the bubble level though).
Similar threads
Accessories
MDT 34mm 1pc Scope Mount
