I'm equally impressed with that combination metal spork/can opener ration tool, sir! Very nice.Great stuff but I feel for you. I recently had a similar experience
I was on a streak with all these barn find old new stock rifles and than it happened…….. poorly listed item with only one pic but after a long phone conversation I was assured by one of the dealer personal that the gun was lightly used and well maintained …… ya figure how bad could a 308 be
The whole deal started bad …. The rifle got lost for 10 days. USPS is very bad these days
They first told me it was shipped …. Than I was told it was at my FFL ….. than I was told fed ex accidentally picked it up with a USPS label and they were holding it. Miraculously it arrived on day 11 and was packaged poorly and the box was beat up
Upon inspection the gun was beat to shit. Damaged crown …. Chamber looked like it was worked on with a power drill and a wire brush. The barrel was badly pitted . I dont think they ever cleaned the barrel …. The copper ran out of it and exposed a shot rifle
The bore scope made me sick. I immediately had my ffl overnight it back UPS the way a gun should be shipped called them in the am and said the gun would be back to them by 10 am and i expected a refund bt 12
Even though they said all sales were final and no refunds Amex confirmed a refund shortly after noon
If the guy didn’t represent the rifle completely opposite of what it was i would not have been so pissed
Amazes me of how people treat a good gun
I was glad I did a few days later I found a 26 inch barrel the first was 20 digi cam rifle that was never shot and i am impressed it wants to shoot
I commend you on the project
Hah as mentioned no barrel on there, but it’s CDG, Manners NS, BnA Tacsport Pro, Mbrace mount, 4.5-28 March, 14” 6creed - 18” 6.5x47 being chambered as we speak.
Sig Cross 6.5cm set up for sportsman class of PRS, coming in .5lbs under weight limit. currently set up with some extra stuff I had around from other/past rifles so its subject to change over the coming months.
Currently
Vortex Venom 5-25
PA Hypertap brake
Atlas Bipod
Salmon River short arca/pic section
cheapo S2 rifle weights
weighted bag rider and large bolt knob off a sig cross PRS
and a 3d printed dope card holder
Currently
Vortex Venom 5-25
PA Hypertap brake
Atlas Bipod
Salmon River short arca/pic section
cheapo S2 rifle weights
weighted bag rider and large bolt knob off a sig cross PRS
and a 3d printed dope card holder
Attachments
Love the setup! Where did you find the file for the 3D printed dope card holder?
Picked up a rifle built by Gary at Paramount Tactical Solutions. They just started building custom guns. I went in with my wife to grab some shooting and introduce the new puppies and saw this on the wall.. It really stood out to me and my wife looked at me and said I should get it... (wife of the year award finalist for sure).
Specs:
Defiance Ruckus SA SS action (90*)
6.5 Creed Bartlien barrel
MPA DN5 Break
Trigger Tech Diamond
Woox Furiosa Ultra Chassis (REALLY LOVE THIS)
I immediately threw my 840 ZCO with the MCT-3 reticle on there... with a spare Accutec Bipod I had laying around.
This is one of the nicest rifles I have shot and my new favorite. I don't own a 90* throw outside my Berghara hunter. This was the smoothest action I have ever used and it was getting smoother throughout the day. I didn't notice real difference in the bolt throw form my ARC and Faxon builds. I might be addicted to shooting this rifle...
Great groups with Hornady 147 ELDM factory, and my first load I tried w/42.8 grains of Staball and Berger 140s (def pulled the last shot). Going to explore that one with some seating depth changes (was loaded to 4 thousandths off lands and probably going to bring it to 2 thousands and try it out). Im thinking 1/4 inch MOA is def in the cards with this build.
Specs:
Defiance Ruckus SA SS action (90*)
6.5 Creed Bartlien barrel
MPA DN5 Break
Trigger Tech Diamond
Woox Furiosa Ultra Chassis (REALLY LOVE THIS)
I immediately threw my 840 ZCO with the MCT-3 reticle on there... with a spare Accutec Bipod I had laying around.
This is one of the nicest rifles I have shot and my new favorite. I don't own a 90* throw outside my Berghara hunter. This was the smoothest action I have ever used and it was getting smoother throughout the day. I didn't notice real difference in the bolt throw form my ARC and Faxon builds. I might be addicted to shooting this rifle...
Great groups with Hornady 147 ELDM factory, and my first load I tried w/42.8 grains of Staball and Berger 140s (def pulled the last shot). Going to explore that one with some seating depth changes (was loaded to 4 thousandths off lands and probably going to bring it to 2 thousands and try it out). Im thinking 1/4 inch MOA is def in the cards with this build.
Last edited:
Here's my latest. DT SRS A1. In left handed.
Both 308 and 65 gaymoor.
Doc
Both 308 and 65 gaymoor.
Doc
I have home repairs taking priority now. Otherwise, I would probably be getting a Desert Tech SRS M2 in 338LM.
So damn your eyes for showing that rifle porn!
Not sure if I've posted this one here or not.
Rem XR-100 in 308. Rather uncommon I guess, as it was a Gander Mountain exclusive. I got it there on clearance for $600. Aside from having a butt pad installed for more LOP, it's bone stock. Shoots lights out. A buddy, who's a decent shooter btw, said that 2 of his best 3 groups ever were shot with this rifle.
I've thought about having it threaded, but really don't want to take a chance on messing it up. The only other thing is I prefer 2-stage triggers, but this is pretty nice for a single stage.
Not cherry picked, just and average group I shot.
Rem XR-100 in 308. Rather uncommon I guess, as it was a Gander Mountain exclusive. I got it there on clearance for $600. Aside from having a butt pad installed for more LOP, it's bone stock. Shoots lights out. A buddy, who's a decent shooter btw, said that 2 of his best 3 groups ever were shot with this rifle.
I've thought about having it threaded, but really don't want to take a chance on messing it up. The only other thing is I prefer 2-stage triggers, but this is pretty nice for a single stage.
Not cherry picked, just and average group I shot.
i wanted to try a Bergara action
Put it in an AI stock
It did not like my pet 169 smk load but its trying with factor 168 fed
when i looked at the barrel with my borescope I was surprised how rough the barrel is
Put it in an AI stock
It did not like my pet 169 smk load but its trying with factor 168 fed
when i looked at the barrel with my borescope I was surprised how rough the barrel is
