Pricing out used 50BMG reloading set

[JSanford81]

Hey guys, I’m looking to put a price on a 50BMG reloading set I inherited. THIS IS NOT A FOR SALE ADD, I’m just looking for a rough estimate on what I should be expecting when I sell this. I’ve done some looking around and have a rough guess but want to make sure I’m in line before listing.

RCBS shell holder 88715, 57171, 99200
Le wilson deburring tool
RCBS 50BMG Seat-11
RCBS 50BMG TRIM-11
RCBS 50BMG FL-11
Lee 50BMG-B1 & 50BMG-C1
Lyman 50BMG D11 case/headspace gauge
Lee Wilson 50BMG case/headspace gauge
Lee 50bmg crimp die A-8
Lee decapping rod
RCBS trim pro 2 she’ll holder conversion
Lyman 50BMG accu trimmer
Sinclair 50BMG she’ll holder
RCBS 11/2-12 bullet puller
Wilson trimmer
Hornady lock n load powder measure
RCBS ammomastsr 50BMG Pack reloading press



150rd brass
333 various bullets
90 blanks
1843 CCI No.35 primer
104 sizing load reloaded rounds
50 rounds of “hot” reloads
87 AP bullets
38 APIT bullets
677 incendiary bullets
78 rounds of match target reloads

 

[spife7980]

“I’m not selling it, just let me know what you would offer when I do sell it”

Clever…

 

[camocorvette]

You could Google each item and multiply it by quantity. I know Incendiary rounds go for .05 and apit goes for .04 a projectile

 

[RTH1800]

Do the work. Look up the items new and cut price in 1/2. That should get you close.

 

[JSanford81]

Do the work. Look up the items new and cut price in 1/2. That should get you close.

that’s exactly what I did, just didn’t know if used reloading equipment fetched that kind of money

 

[RTH1800]

It appears in great condition so it should bring near that I would think as a unit. If someone wants to buy part of it I would price higher. If they want all of it might take a bit less.

 

[RTH1800]

It will take a specific buyer due to the nature of the items. Might take a while to move it.

 

[secondofangle2]

I sold a bunch of my stuff when I foolishly spent 10 times as much money to upgrade to bougie 50 BMG stuff.

I had the basic RCBS kit and I think I got four or 500 bucks for the press and the dies and some other little dude dads here and there. THE trouble is it’s hard to find a buyer unless you’re gonna give them a substantial deal on the whole kit and caboodle. And no offense but a bunch of the stuff you have is redundant or not useful like for example the trim die

Nobody wants your reloads and few people want your loaded projectiles which are difficult to ship and so are the primers impossible to ship. So for that stuff you need a local buyer limiting your market. The primers you have now go for a dollar apiece so they are the most valuable part of everything you listed.

Guys think 50 BMG brass is worth a lot but it’s not after it’s been fired. I sold a bunch of ones fired horny and fully prepped meaning crimp removed, full length sized and a kneeled, and all of that and I think I got $.75 a case for them a while back.

So in some, you are limited by the buyers market and the demand is limited and a lot of it’s gonna have to be a local sale. My guess is it will have to be fire sale prices to get rid of it at least that was my experience.

 

[JSanford81]

I sold a bunch of my stuff when I foolishly spent 10 times as much money to upgrade to bougie 50 BMG stuff.

I had the basic RCBS kit and I think I got four or 500 bucks for the press and the dies and some other little dude dads here and there. THE trouble is it’s hard to find a buyer unless you’re gonna give them a substantial deal on the whole kit and caboodle. And no offense but a bunch of the stuff you have is redundant or not useful like for example the trim die

Nobody wants your reloads and few people want your loaded projectiles which are difficult to ship and so are the primers impossible to ship. So for that stuff you need a local buyer limiting your market. The primers you have now go for a dollar apiece so they are the most valuable part of everything you listed.

Guys think 50 BMG brass is worth a lot but it’s not after it’s been fired. I sold a bunch of ones fired horny and fully prepped meaning crimp removed, full length sized and a kneeled, and all of that and I think I got $.75 a case for them a while back.

So in some, you are limited by the buyers market and the demand is limited and a lot of it’s gonna have to be a local sale. My guess is it will have to be fire sale prices to get rid of it at least that was my experience.

This was the response I was looking for and expecting. I appreciate it!