- Thread starter Some Day
- Start date
Re: Witch Stiller Action
0.585 on the norma and 0.588 on the lapua according to Wiki, why not run the lapua, more brass options available not alot of cost difference.
0.585 on the norma and 0.588 on the lapua according to Wiki, why not run the lapua, more brass options available not alot of cost difference.
Re: Witch Stiller Action
Might want to call over to Stiller and check on build time. They just relocated their shop to a bigger facility. Production has been down for a few but they should be caught up with a little bit of time. Still worth the wait to get their product though.
Might want to call over to Stiller and check on build time. They just relocated their shop to a bigger facility. Production has been down for a few but they should be caught up with a little bit of time. Still worth the wait to get their product though.
Re: Witch Stiller Action
...good witch or bad witch...
...good witch or bad witch...
Re: Witch Stiller Action
I saw a witch on the shore once...
A Tac 300 will work but they will have to open up the boltface from .540 to .585. The Norma was designed to run in a standard long action. According to some info provided to me by Dr. Heath the Norma chamber pressure runs 62,367psi (430mPa), the 300WM by comparison runs max SAAMI spec 64,000psi (440 MPa). The Tac 300 should be fine, a friend of mine runs a 338NM built by RWS on a Surgeon action and it is stupidly accurate.
Oh and buy a thesaurus
I saw a witch on the shore once...
A Tac 300 will work but they will have to open up the boltface from .540 to .585. The Norma was designed to run in a standard long action. According to some info provided to me by Dr. Heath the Norma chamber pressure runs 62,367psi (430mPa), the 300WM by comparison runs max SAAMI spec 64,000psi (440 MPa). The Tac 300 should be fine, a friend of mine runs a 338NM built by RWS on a Surgeon action and it is stupidly accurate.
Oh and buy a thesaurus
Re: Witch Stiller Action
Get a Mk 13 Stiller or call them Directly and see if they would make a long action with a integral base which would be really nice.
Get a Mk 13 Stiller or call them Directly and see if they would make a long action with a integral base which would be really nice.
Re: Witch Stiller Action
you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up.
you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up.
Re: Witch Stiller Action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stiller</div><div class="ubbcode-body">you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up. </div></div>
From the man him self
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stiller</div><div class="ubbcode-body">you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up. </div></div>
From the man him self
Re: Witch Stiller Action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stiller</div><div class="ubbcode-body">you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up.</div></div>
Thanks for weighing in on this, are the internal dimensions of the Tac300 too small for the case or is there some other reason?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Stiller</div><div class="ubbcode-body">you need a tac338 for the 338 norma mag. a tac300 wont work and we wont open it up.</div></div>
Thanks for weighing in on this, are the internal dimensions of the Tac300 too small for the case or is there some other reason?
