I have made the decision to buy my first DBM
What options should I look at and which should I avoid.
Thanks
What options should I look at and which should I avoid.
Thanks
- Thread starter Rprecision
- Start date
Re: Which DBM for Savage 10 .308
CDI all the way. Jeff is a great guy and was very helpful when I ordered mine. I've got one of his DBM for a Savage 10 that had an accustock and the funky bolt release in front of the trigger guard. Pulled out the old, dropped in the new and life is good.
CDI Precision Gunworks
CDI all the way. Jeff is a great guy and was very helpful when I ordered mine. I've got one of his DBM for a Savage 10 that had an accustock and the funky bolt release in front of the trigger guard. Pulled out the old, dropped in the new and life is good.
CDI Precision Gunworks
Re: Which DBM for Savage 10 .308
lol... like you have a lot of choice...
centerfeed... you have CDI and Accurate Mag
staggerfeed... you have CDI
there are others, but these are the only reasonable choices
lol... like you have a lot of choice...
centerfeed... you have CDI and Accurate Mag
staggerfeed... you have CDI
there are others, but these are the only reasonable choices
Re: Which DBM for Savage 10 .308
CDI - uses AI mags requires stock inletting (most expensive $200 w/o mag)
Accurate-Mag - OEM, little to no stock mod, uses AI or Accurate Mags (middle priced $200 with mag)
RatMag - modified Axis mag by forum member z71rat (least expensive, members seem to like it, has the most limited cartridge length)
Everything else is crap or is sold by folks with poor CS.
CDI - uses AI mags requires stock inletting (most expensive $200 w/o mag)
Accurate-Mag - OEM, little to no stock mod, uses AI or Accurate Mags (middle priced $200 with mag)
RatMag - modified Axis mag by forum member z71rat (least expensive, members seem to like it, has the most limited cartridge length)
Everything else is crap or is sold by folks with poor CS.
Re: Which DBM for Savage 10 .308
Yes, overall cartridge length is the problem that gets ran into the most. My conversions will run a COAL of 2.850" and will function correctly.
Definitely the least expensive route out there is the best part!!
Thanks for the thumbs up TwoGun!! It is muchly appreciated!!
DK
Yes, overall cartridge length is the problem that gets ran into the most. My conversions will run a COAL of 2.850" and will function correctly.
Definitely the least expensive route out there is the best part!!
Thanks for the thumbs up TwoGun!! It is muchly appreciated!!
DK
Re: Which DBM for Savage 10 .308
There's also Kevin Rayhill's bottom metal, it takes aics magazines as well and costs 200, and Kevin is a stand up guy.
There's also Kevin Rayhill's bottom metal, it takes aics magazines as well and costs 200, and Kevin is a stand up guy.
Re: Which DBM for Savage 10 .308
+eleventy for CDI
+eleventy for CDI
Re: Which DBM for Savage 10 .308
CDI
RatMag
You can not go wrong either way. Love them both.
CDI
RatMag
You can not go wrong either way. Love them both.
Re: Which DBM for Savage 10 .308
CDI
CDI
Re: Which DBM for Savage 10 .308
Ok, since everyone is voting, I really really like the Accurate Mag bottom metal. Yeah, it's not quite CDI but neither is the model 10. It's a bit overkill unless you have the McMillan stock.
So lets go:
Accustock - RatMag
HS Precision Stock - Accurate-Mag/Rat Mag
McMillan - CDI
Ok, since everyone is voting, I really really like the Accurate Mag bottom metal. Yeah, it's not quite CDI but neither is the model 10. It's a bit overkill unless you have the McMillan stock.
So lets go:
Accustock - RatMag
HS Precision Stock - Accurate-Mag/Rat Mag
McMillan - CDI
Re: Which DBM for Savage 10 .308
sharpshootersupply carries a new bm for savages now
sharpshootersupply carries a new bm for savages now
Re: Which DBM for Savage 10 .308
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s.i.t.</div><div class="ubbcode-body">sharpshootersupply carries a new bm for savages now </div></div>
Yeah, I mentioned (or lack of mentioned) them under my horrible customer service umbrella.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s.i.t.</div><div class="ubbcode-body">sharpshootersupply carries a new bm for savages now </div></div>
Yeah, I mentioned (or lack of mentioned) them under my horrible customer service umbrella.
Re: Which DBM for Savage 10 .308
I will check them out, Thanks
I will check them out, Thanks
Re: Which DBM for Savage 10 .308
kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
Re: Which DBM for Savage 10 .308
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
Re: Which DBM for Savage 10 .308
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Joop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
</div></div>
Thats because his site hasnt been updated in years due to a terrible service provider, but that's supposed to change soon.
It takes AI mags and runs about 200 dollars with inletting. I ordered one and am waiting for it to arrive with the stock I ordered from them.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Joop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
</div></div>
Thats because his site hasnt been updated in years due to a terrible service provider, but that's supposed to change soon.
It takes AI mags and runs about 200 dollars with inletting. I ordered one and am waiting for it to arrive with the stock I ordered from them.
Re: Which DBM for Savage 10 .308
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Joop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
</div></div>
ETA: <span style="font-weight: bold">The comments below are referring to Sharp Shooter Supply.</span>
If you order from them BE PREPARRED to wait. Most likely you will talk to Lisa. She has no problem assisting people and is fairly knowledgeable on what Fred does. She is also very good at making excuses.
I ordered one of their fishnet bolts, bolt handles and a new trigger guard. She swore up and down that it was in stock and would ship in a day or two. The only thing that happened in a day, was my credit card being charged.
I more or less forgot about the order till my credit card bill came in and I saw the charge. I called and asked if the order shipped and she told me that it had not, but it should go out within the week. She said that Fred was working up a batch of bolts. He was working up a batch, after they were supposedly in stock when I ordered 3 - 4 weeks earlier.
Also be preparred to call multiple times to get through. Most of the time the phone is busy and a lot of time when not busy it won't get answered.
Fred does great work, and you will eventually get what you ordered. You also will be frustrated along the way.
I have had two dealings with them, and that is enough! I am going the DBM route on a Savage 10FP. I will not be doing business with SSS!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Joop</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">kevin rayhill at stockade has a DBM too, great guy from everybodys posts and better cust service than SSS
</div></div>
Maybe I'm blind, but I don't see it on his site. Doe it take AI mags? How much do they run?
</div></div>
ETA: <span style="font-weight: bold">The comments below are referring to Sharp Shooter Supply.</span>
If you order from them BE PREPARRED to wait. Most likely you will talk to Lisa. She has no problem assisting people and is fairly knowledgeable on what Fred does. She is also very good at making excuses.
I ordered one of their fishnet bolts, bolt handles and a new trigger guard. She swore up and down that it was in stock and would ship in a day or two. The only thing that happened in a day, was my credit card being charged.
I more or less forgot about the order till my credit card bill came in and I saw the charge. I called and asked if the order shipped and she told me that it had not, but it should go out within the week. She said that Fred was working up a batch of bolts. He was working up a batch, after they were supposedly in stock when I ordered 3 - 4 weeks earlier.
Also be preparred to call multiple times to get through. Most of the time the phone is busy and a lot of time when not busy it won't get answered.
Fred does great work, and you will eventually get what you ordered. You also will be frustrated along the way.
I have had two dealings with them, and that is enough! I am going the DBM route on a Savage 10FP. I will not be doing business with SSS!
Re: Which DBM for Savage 10 .308
I already have one of his stocks. Worth the wait.
ETA: oops! I think you were referring to SSS. I was talking about Kevin Rayhill/Stockade. I've heard too many horror stories about SSS to even consider them.
I already have one of his stocks. Worth the wait.
ETA: oops! I think you were referring to SSS. I was talking about Kevin Rayhill/Stockade. I've heard too many horror stories about SSS to even consider them.
Re: Which DBM for Savage 10 .308
Another +1 for CDI. I have CDI on an inlett B&C medalist running my 10FP in 308. It has run AI, Alpha and Ruger mags with no problems.
Another +1 for CDI. I have CDI on an inlett B&C medalist running my 10FP in 308. It has run AI, Alpha and Ruger mags with no problems.
Re: Which DBM for Savage 10 .308
Cdi and they will mill your stock also
Cdi and they will mill your stock also
Re: Which DBM for Savage 10 .308
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TwoGun</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s.i.t.</div><div class="ubbcode-body">sharpshootersupply carries a new bm for savages now </div></div>
Yeah, I mentioned (or lack of mentioned) them under my horrible customer service umbrella. </div></div>
If there is a customer service level below horrible then Shart Shooters Supply would fall into it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TwoGun</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s.i.t.</div><div class="ubbcode-body">sharpshootersupply carries a new bm for savages now </div></div>
Yeah, I mentioned (or lack of mentioned) them under my horrible customer service umbrella. </div></div>
If there is a customer service level below horrible then Shart Shooters Supply would fall into it.
