• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Army M24 Build Thread

Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M24SWS</div><div class="ubbcode-body">I was able to get a M24 flash hider for 55 dollars shipped USPS. The only catch is i can't have the flash hider installed at the same time as the front sight. The flash hider has some what appears to be cosmoline or some protective oil on it.

IMG_0056.jpg


IMG_0057.jpg
</div></div>

You are one lucky guy. I wish that someone could do a small run of these things.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EODsix</div><div class="ubbcode-body">The blast suppressor you have seems to be the later model with the lock ring for the OK Webber front sight base. The one I have is the earlier version that would not fit on the OK Webber base. The OK Webber base is taller than the Remington front sight base and the lock ring would not clear the Webber base. </div></div>

Can you post a photo of the clearance slot up close? Maybe take a measurement. Im looking for one of these, but didnt know there were 2 variants.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M24SWS</div><div class="ubbcode-body">The only catch is i can't have the flash hider installed at the same time as the front sight.



</div></div>

Thats how its supposed to be. The flash hider is primarily used with the AN/PVS-10 night vision scope. You would not require it with the metallic sights.
 
Re: Army M24 Build Thread

Heath, do you still have your OK Webber front base? Maybe you can show Lockedandloaded a comparison pic of the lock ring and the two different sight base heights. I'm presently indisposed. I can do a pic of the old style a little later or maybe I can get someone else to post a pic of it.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EODsix</div><div class="ubbcode-body">Heath, do you still have your OK Webber front base? Maybe you can show Lockedandloaded a comparison pic of the lock ring and the two different sight base heights. I'm presently indisposed. I can do a pic of the old style a little later or maybe I can get someone else to post a pic of it. </div></div>

All my OK webber parts have been sold approx 25 days ago.
 
Re: Army M24 Build Thread

I sent a request to the person who bought them if they could take pics of the front base and measure it and so forth and asked them to post in this thread.


Heath
 
Re: Army M24 Build Thread

There is and easy way to figure this, the original FH was engineered for the Remington 40X front sight base that is .170 high, so the lock ring has a shallow clearance notch.
The OK Webber front base being taller, .375 if memory serves, has the larger diameter lock ring to account for the deeper clearance slot.

The actual flash/blast device has not changed just the lock ring.
 
Re: Army M24 Build Thread

Triggers have been discussed already here and elsewhere, my apologies if what I'm going to ask speciffically has been covered already.

I wanted to know if a whole new sear adj. block made to shape with a m24 spring pad as a single piece is needed to replicate an M24 trigger, or can a spring-pad chunk of metal be brazed onto existing sear? A replacement piece would need to be exact dim. to interface with safety cam so to me it be easier to leave existing one and affix an extension. I probably should just let Mike Lau handle it I guess.
smile.gif
 
Re: Army M24 Build Thread

Heres some measurements of the flash hider. I will get some of the front base later on.


IMG_0068.jpg


IMG_0067.jpg


IMG_0062.jpg


IMG_0061.jpg


IMG_0060.jpg


 
Re: Army M24 Build Thread

That is a good question on the trigger, I think I remember the one that Lau did for me had a whole new piece, might be a good project if you know what you are doing.
 
Re: Army M24 Build Thread

Getting a genuine M24 is next on the things to do list for this rifle aside from optics and rings. The only legit M24 trigger i have seen was on ebay for several hundred dollars. Mike Lau is the person i will have to give a call sometime. But i gotta admit though, my 40X trigger is pretty nice.
 
Re: Army M24 Build Thread

Thanks for those pix of the blast supressor. If you get a line on one for sale at reasonable cost, let me know.


I want to mention this about the M24 trigger. It is not, by most peoples standards, a "match grade" or Benchrest quality unit. The "breaking a glass rod" wont really describe its feel. It is only adjustable down to about 3.5 pounds pull weight. It has an adjustment screw on the trigger pad, but that is designed to INCREASE the pull weight (up to approx 8# pull). It is not designed to LOWER the weight. Its made so if the screw should become lost or loosen out, the rifle will still function at the minimum pull weight. Many Army shooters simply remove the adjustment screw. Just simpler that way.
 
Re: Army M24 Build Thread

Good news! I got it! I got my M24! It will be here this wednesday, sold by CitizenArrest, I will post pics. Now I gotta buy some cheap ADL stock and remove the buttpad to get it to the M24 stock, then buy the rings and the scope.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: red6actual</div><div class="ubbcode-body">That is a good question on the trigger, I think I remember the one that Lau did for me had a whole new piece, might be a good project if you know what you are doing. </div></div>

Can you show us a pic of the trigger that Lau did for you?
 
Re: Army M24 Build Thread

Unfortunately not, I do not have the rifle any longer and did not take any detailed pics of the trigger.
 
Re: Army M24 Build Thread

What kind of pics are you wanting to see? I've posted the DBM in a couple of places here already. What would you like to see?
 
Re: Army M24 Build Thread

I was wanting to see the regular M24 stock with the badger DBM. A shot of the whole rifle, Just thought i would throw it out there, I recently almost purchased one and was curios what it would look like. No pressure on any one. I just wasnt able to find one on google so i posted it here.
 
Re: Army M24 Build Thread

Per your request, a few more pics of the Badger DBM on a standard H-S Precsion PST-024 stock.

IMG_0915-1.jpg

IMG_0916-1.jpg


 
Re: Army M24 Build Thread

Here are a couple of photos and dimensions for the m24 front sight base by OK Weber per the request of M24SWS
314wd8o.jpg

34y2t0g.jpg


Hole spacing is 0.560 on center
 
Re: Army M24 Build Thread

Would be great if you can also show the dimensions for the OKW rear sight base.
 
Re: Army M24 Build Thread

I have a picture of the OK rear base, no dimensions as I got rid of them, a couple pics of the front as well.

IMG_2753.jpg

IMG_2754.jpg

IMG_2755.jpg
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: red6actual</div><div class="ubbcode-body">I have a picture of the OK rear base, no dimensions as I got rid of them, a couple pics of the front as well.

IMG_2753.jpg

IMG_2754.jpg

IMG_2755.jpg
</div></div>

I rather like design of the rear base of the OK webber's. I wanted the redfield parts since that was all the original equipment as far as iron sights go. I might buy and install the Badger Ordnanace M24 drop in DBM system at a later point in time.
 
Re: Army M24 Build Thread

It took a while....but here it is my M24. Its a work of art, Im glad that I finally have it. Its my dream rifle. I will buy the scope and then the rings for it later on, put an OK rear base, buy a cheekpad and buy a cheap adl stock that have the remington logo and the proper buttpad size. If someone has one already, I will happpily give them the HS PRECISION one.

DSC03005.jpg

DSC03006.jpg

DSC03007.jpg

DSC03008.jpg

DSC03011.jpg

DSC03009.jpg

DSC03014.jpg
 
Re: Army M24 Build Thread

Very nice rifle, it is coming together very well. M24's i love becuase there so plain and simple and effective at what they do.

Keep posting the pictures as i never get tired of looking at them.


Heath
 
Re: Army M24 Build Thread

Thanks man, when I get the rest of the things, I will post more pics of it. I just love how it looks, how simply and how wonderful it is. It isnt that heavy, I can carry it with two fingers around the stock.

Im glad for Citizenarrest, and Im glad that he sold it to me and was very pacient with me, Im very happy with the rifle....and even more happy when I get the rest of the things and shoot this beauty.
 
Re: Army M24 Build Thread

Aside from the thick H-S Precision logo butt pad, it looks like you have the right stock. Why would you want to buy some cheap ADL stock and replace it?
 
Re: Army M24 Build Thread

No, no. You misunderstood. The ADL old synthetic stock, comes with the old buttpad from Remington. The one that has the remington logo and the correct size of the buttpad that I want. Its why I want to buy one and replace my buttpad....and like I said, if anyone has the correct buttpad on one of those stocks, I will happily trade the hsprecion buttpad.
 
Re: Army M24 Build Thread

That idea is not going to work on the butt pad swap, those 1 inch thich HS butt pads are epoxied on that metal and the metal is not flat either, I tried that earlier this year as a buddy found one in his parts bin.
 
Re: Army M24 Build Thread

Sorry, I did misunderstand you. Red6actual is right though, that whole butt plate assembly is different, not just the pad itself. Save yourself some heartache and don't tear up the butt pad you have, you'll hate yourself in the morning for doing so. This is and "all or nothing" scenario with respect to the butt plate assembly.
 
Re: Army M24 Build Thread

So even if i had a remington buttpad, is not possible to assemble it uh. Well, how about paying a professional to cut the buttpad to the military lenght and epoxied it to it. I dont have the tools or the experience.
 
Re: Army M24 Build Thread

as i posted earlier on in this thread, any competent gunsmith can reproduce the muzzle brake, just gonna be a matter of how much he will charge. I barrowed one from work and luckily my uncle thats a machinist made me onefrom stainless steel, GAP coated it

M24-flash.jpg


I wonder if I swung by and sweet talked Marty or George if they could do a run of say 50-100 of em
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">i'd get the right scope base before worryin bout the buttpad </div></div>

Yes, i know it doesnt has the correct base. But i am worrying that if i do buy the correct one, the screws will mismatch. Or,are they an standard size and will fit normally?
 
Re: Army M24 Build Thread

Remington 700 actions come with 6-48 screw size. The leupold base used on the M24 uses 8-40 screw size so you would have to have the screw holes in the action for the base opened to 8-40 if there not already in that configuration.
 
Re: Army M24 Build Thread

Location of the screws in the action that are for mounting a base are the factory same as far as where they are.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">as i posted earlier on in this thread, any competent gunsmith can reproduce the muzzle brake, just gonna be a matter of how much he will charge. I barrowed one from work and luckily my uncle thats a machinist made me onefrom stainless steel, GAP coated it

M24-flash.jpg


I wonder if I swung by and sweet talked Marty or George if they could do a run of say 50-100 of em </div></div>

Im sure any comptent gunsmith could make one but you have to have one to copy from otherwise might just be wasting time.
Ill definitly be down for at least one maybe more if someone would make a run of them.
 
Re: Army M24 Build Thread

I'll try to get get some dimensions posted for the OK Weber rear base this weekend.
 
Re: Army M24 Build Thread

It is true that issued M24's are getting equipped with other optics? I have heard they usually put user selected scopes on them.
 
Re: Army M24 Build Thread

No, I mean. I have heard that the snipers they are issued to, can select their own scope. Have heard of some mounting nightforce and even Schmidt and bender on their M24s
 
Re: Army M24 Build Thread

You have heard wrong. The M24 issued with the Leupold M3A Ultra scope. Later when the Ultra line ran out they replaced with Leupold Mk4 M3s as needed and later the M24 was issued with the Leupold M3 LR/T. Scopes. No other scopes have ever been issued with the weapon system. The only significant difference in the scopes is that the LR/T scopes dials turn in the opposite direction from the Ultra and Mk4 dials. That new scope that M24SWS referred to is going on the M2010 and has never been on the M24.

The only time I've ever seen a scope other than then 3 M3s mentioned above was on M24s that belonged to the Army Marksmanship Unit and they do some testing and research.
 
You must log in or register to reply here.

Similar threads

m1marty
Accessories Surplus M24 stock/Parts, M14, Garand, More
Replies
11
Views
2K
m1marty
m1marty
USMCSGT0331
A thread with links to suitable donor rifles?
Replies
5
Views
360
RIGREG
R
baker72
Firearms WTS USMC Propert 40X 22LR, M40,M40A1, M70 with Unertl scope,Barrett MRAD MK22 Socom trials rifle. SEI Crazy Horse M14.
Replies
8
Views
1K
baker72
baker72
Coejro
SOLD WTT/WTS McMillan HTG Smear for M2010 RACS chassis
Replies
6
Views
655
Coejro
Coejro
gasrat
SOLD 6XC, Kelbly, McMillian (KMW), Bartlein, LOW ROUND COUNT
Replies
9
Views
495
gasrat
gasrat
Top Bottom
Back