- Thread starter patches
- Start date
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Any word on the 10 round mags???
Any word on the 10 round mags???
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
I have the exact same setup. Yes, the B&C scope cover needs to come off if you want to shoot this thing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">I got my DTA and Spuhr mount in yesterday. I asked Randy at Mile High which mount to go with my S&B 5-25x56 and he suggested the SP-4802. He was dead on! The bell to the top rail is so close that I will have to shave a bit off of the B&C cap or take off/put on as needed rather than flip-up/down. You can get the caps to fit, it is just then touching the rail which I'm not a fan of.
I'll try to get pictures up in a bit. </div></div>
I have the exact same setup. Yes, the B&C scope cover needs to come off if you want to shoot this thing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">I got my DTA and Spuhr mount in yesterday. I asked Randy at Mile High which mount to go with my S&B 5-25x56 and he suggested the SP-4802. He was dead on! The bell to the top rail is so close that I will have to shave a bit off of the B&C cap or take off/put on as needed rather than flip-up/down. You can get the caps to fit, it is just then touching the rail which I'm not a fan of.
I'll try to get pictures up in a bit. </div></div>
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">I got my DTA and Spuhr mount in yesterday. I asked Randy at Mile High which mount to go with my S&B 5-25x56 and he suggested the SP-4802. He was dead on! The bell to the top rail is so close that I will have to shave a bit off of the B&C cap or take off/put on as needed rather than flip-up/down. You can get the caps to fit, it is just then touching the rail which I'm not a fan of.
I'll try to get pictures up in a bit. </div></div>
I used the Spuhr SP-4602 (6mil/20.6moa) mount with the same scope and rifle. I added the Tenebraex 2" ARD and TT caps (tossed the Butler Creeks) and I have about 2-3 mm to spare between rail and ARD. If I need the extra 7mil of the Spuhr 4802, I think it will clear as long as I stick with the Tenebraex/TT combo.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">I got my DTA and Spuhr mount in yesterday. I asked Randy at Mile High which mount to go with my S&B 5-25x56 and he suggested the SP-4802. He was dead on! The bell to the top rail is so close that I will have to shave a bit off of the B&C cap or take off/put on as needed rather than flip-up/down. You can get the caps to fit, it is just then touching the rail which I'm not a fan of.
I'll try to get pictures up in a bit. </div></div>
I used the Spuhr SP-4602 (6mil/20.6moa) mount with the same scope and rifle. I added the Tenebraex 2" ARD and TT caps (tossed the Butler Creeks) and I have about 2-3 mm to spare between rail and ARD. If I need the extra 7mil of the Spuhr 4802, I think it will clear as long as I stick with the Tenebraex/TT combo.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
DTA HARD TARGET INTERDICTION .50 BMG
http://www.tactical-life.com/online/special-weapons/dta-hard-target-interdiction-50-bmg/
Only a few paragraphs are available without subscription.
DTA HARD TARGET INTERDICTION .50 BMG
http://www.tactical-life.com/online/special-weapons/dta-hard-target-interdiction-50-bmg/
Only a few paragraphs are available without subscription.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Great article.
What kind of bi-pod is on that HTI? Looks solid.
Great article.
What kind of bi-pod is on that HTI? Looks solid.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Raptor 2000</div><div class="ubbcode-body">What kind of bi-pod is on that HTI? Looks solid.
</div></div>
Looks like LRAccuracy. Definitely solid. And like everything else in that picture: not cheap.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Raptor 2000</div><div class="ubbcode-body">What kind of bi-pod is on that HTI? Looks solid.
</div></div>
Looks like LRAccuracy. Definitely solid. And like everything else in that picture: not cheap.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Took my brand spankin' new DTA with .308 22" barrel out for the first time today. After zeroing my scope at 100yds I shot two 5 shot groups. The first was just over 1" center to center. The second had the first 4 in .314" and then I got a lil antsy and pulled the fifth shot to widen the group to the CRAZY size of .630" haha. That was all with Black Hills 175 SMK.
I really can't speak highly enough about this rifle. I'm still trying to get used to the ergonomics as it is significantly different than my others, but I am very impressed and excited to see what it'll do with more practice!
Took my brand spankin' new DTA with .308 22" barrel out for the first time today. After zeroing my scope at 100yds I shot two 5 shot groups. The first was just over 1" center to center. The second had the first 4 in .314" and then I got a lil antsy and pulled the fifth shot to widen the group to the CRAZY size of .630" haha. That was all with Black Hills 175 SMK.
I really can't speak highly enough about this rifle. I'm still trying to get used to the ergonomics as it is significantly different than my others, but I am very impressed and excited to see what it'll do with more practice!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">Took my brand spankin' new DTA with .308 22" barrel out for the first time today. After zeroing my scope at 100yds I shot two 5 shot groups. The first was just over 1" center to center. The second had the first 4 in .314" and then I got a lil antsy and pulled the fifth shot to widen the group to the CRAZY size of .630" haha. That was all with Black Hills 175 SMK.
I really can't speak highly enough about this rifle. I'm still trying to get used to the ergonomics as it is significantly different than my others, but I am very impressed and excited to see what it'll do with more practice! </div></div>
Contrats on the new rifle. Since I started shooting my DTA a few rifles have left my safe for good and a couple others have become safe queens.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">Took my brand spankin' new DTA with .308 22" barrel out for the first time today. After zeroing my scope at 100yds I shot two 5 shot groups. The first was just over 1" center to center. The second had the first 4 in .314" and then I got a lil antsy and pulled the fifth shot to widen the group to the CRAZY size of .630" haha. That was all with Black Hills 175 SMK.
I really can't speak highly enough about this rifle. I'm still trying to get used to the ergonomics as it is significantly different than my others, but I am very impressed and excited to see what it'll do with more practice! </div></div>
Contrats on the new rifle. Since I started shooting my DTA a few rifles have left my safe for good and a couple others have become safe queens.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Congratulations, I got a good idea how much you like it because I torched mine off after receiving it last week and although I have not shot groups yet, I have tortured some steel and rocks. On Friday I found a canyon with rock walls on each side that sloped out over 1600 yards. S.pent some time trying to coax a coyote out in the open and when that didn't work I found a rock sitting at 815 that seemed to be sitting at an arrogant angle. Penalized that one and next made first round hits on one at 1230 and 1415. There is a certain amount of satisfaction about it that doesn't need to be explained here. Three rounds put a spring in my step for a space. Later this week I hope to be putting a March scope on this unit to see where that takes me. Good on you again, enjoy.
Congratulations, I got a good idea how much you like it because I torched mine off after receiving it last week and although I have not shot groups yet, I have tortured some steel and rocks. On Friday I found a canyon with rock walls on each side that sloped out over 1600 yards. S.pent some time trying to coax a coyote out in the open and when that didn't work I found a rock sitting at 815 that seemed to be sitting at an arrogant angle. Penalized that one and next made first round hits on one at 1230 and 1415. There is a certain amount of satisfaction about it that doesn't need to be explained here. Three rounds put a spring in my step for a space. Later this week I hope to be putting a March scope on this unit to see where that takes me. Good on you again, enjoy.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
M54....what caliber you running?
...sounds like fun!
M54....what caliber you running?
...sounds like fun!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Anyone have any idea when the PSR is going to be released to the public? Wonder if the Covert will get these updates.
http://www.youtube.com/watch?v=y51lm4Qfy_4
Anyone have any idea when the PSR is going to be released to the public? Wonder if the Covert will get these updates.
http://www.youtube.com/watch?v=y51lm4Qfy_4
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
The PSR isn't going to be released to the public. It is only being developed for the military.
The PSR isn't going to be released to the public. It is only being developed for the military.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Well if that's true then they are really shooting theirselves in the foot as the new modifications look like a BIG improvment over the SRS. I love the dust cover and new buttstock....and best feature I heard him say <span style="font-weight: bold">"adjustable cheek piece"</span>
These really are substantial improvements over the original design.
Edit--
I'm very interested in where you got your info.
The idea that this weapon will be only for military application just doesn't make any sense at all. Sounds COMPLETELY cost ineffective on both sides as this isn't a mainstream sniper system like the M107 or an M110. Crap the SR-25 can be purchased by civilians...for that matter any ANY other light weapon system in use by any part of the military can be purchased...minus some fullauto weapons in use of course.
Well if that's true then they are really shooting theirselves in the foot as the new modifications look like a BIG improvment over the SRS. I love the dust cover and new buttstock....and best feature I heard him say <span style="font-weight: bold">"adjustable cheek piece"</span>
These really are substantial improvements over the original design.
Edit--
I'm very interested in where you got your info.
The idea that this weapon will be only for military application just doesn't make any sense at all. Sounds COMPLETELY cost ineffective on both sides as this isn't a mainstream sniper system like the M107 or an M110. Crap the SR-25 can be purchased by civilians...for that matter any ANY other light weapon system in use by any part of the military can be purchased...minus some fullauto weapons in use of course.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
For anyone interested...RedGoat was right. I did some digging and found a post from sr90 around page 32...
<span style="font-weight: bold">"PSR development is still ongoing, we just showed some of the highlights on the military version of the SRS rifle at Shot Show. It will be a military only rifle, however we may entertain some type of PSR upgrade kit for SRS rifles in the future, but it's all up in the air right now."</span>
I really hope he decides to sell this in the near future. All the modifications I saw are a real welcome refinement on an already great system.
Edit--its on page 36
For anyone interested...RedGoat was right. I did some digging and found a post from sr90 around page 32...
<span style="font-weight: bold">"PSR development is still ongoing, we just showed some of the highlights on the military version of the SRS rifle at Shot Show. It will be a military only rifle, however we may entertain some type of PSR upgrade kit for SRS rifles in the future, but it's all up in the air right now."</span>
I really hope he decides to sell this in the near future. All the modifications I saw are a real welcome refinement on an already great system.
Edit--its on page 36
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body"><span style="color: #FF0000">The PSR rifle itself will not be available for civilian sale</span>, we will likely do some kind of upgrade kit in the future though, similar to the monopod upgrade we do. </div></div>
p.44
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr90</div><div class="ubbcode-body"><span style="color: #FF0000">The PSR rifle itself will not be available for civilian sale</span>, we will likely do some kind of upgrade kit in the future though, similar to the monopod upgrade we do. </div></div>
p.44
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WildBill3/75</div><div class="ubbcode-body">Well if that's true then they are really shooting theirselves in the foot as the new modifications look like a BIG improvment over the SRS. I love the dust cover and new buttstock....and best feature I heard him say <span style="font-weight: bold">"adjustable cheek piece"</span></div></div>
Two pounds lighter!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WildBill3/75</div><div class="ubbcode-body">Well if that's true then they are really shooting theirselves in the foot as the new modifications look like a BIG improvment over the SRS. I love the dust cover and new buttstock....and best feature I heard him say <span style="font-weight: bold">"adjustable cheek piece"</span></div></div>
Two pounds lighter!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 402</div><div class="ubbcode-body">Well this was my answer to the bolt knob problem,even with the new style I found it somewhat lacking in both style and function. I think these look great and mine functions flawlessly. Got it through [email protected]
sully </div></div>
I have both of these knobs and they're great! I particularly enjoy the round knob with the texture, but the longer knob is nice as well. Keep an eye out for additional things coming from Zach. He's an avid DTA shooter (as am I), and so he's got some great ideas that are brewing . . . with actual product coming soon!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 402</div><div class="ubbcode-body">Well this was my answer to the bolt knob problem,even with the new style I found it somewhat lacking in both style and function. I think these look great and mine functions flawlessly. Got it through [email protected]
sully </div></div>
I have both of these knobs and they're great! I particularly enjoy the round knob with the texture, but the longer knob is nice as well. Keep an eye out for additional things coming from Zach. He's an avid DTA shooter (as am I), and so he's got some great ideas that are brewing . . . with actual product coming soon!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.
I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.</div></div>
10 rd mags??
recoil pads??
can you let any secrets out? Just curious!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.</div></div>
10 rd mags??
recoil pads??
can you let any secrets out? Just curious!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Any one interested in doing some DTA shooting in NC. I'm looking to do some whitetail hunting and I need some leads. I plan on taking my SRS. I will be in Charlotte the end of November. PM me if interested. Hopefully Ill be rocking my new Benchmark in a 6.5 Creedmore.
Any one interested in doing some DTA shooting in NC. I'm looking to do some whitetail hunting and I need some leads. I plan on taking my SRS. I will be in Charlotte the end of November. PM me if interested. Hopefully Ill be rocking my new Benchmark in a 6.5 Creedmore.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PSYOPS</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.</div></div>
10 rd mags??
recoil pads??
can you let any secrets out? Just curious! </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PSYOPS</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">I appreciate the bolt knob tips. Just talked to Zach. Ordered some bolt knobs and was pleased to hear about his other DTA SRS aftermarket projects.</div></div>
10 rd mags??
recoil pads??
can you let any secrets out? Just curious! </div></div>
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
He mentioned a few hints and did not swear me to secrecy: cheekpiece, buttpad, and spare magwell. I also mentioned the 2# weight loss of the PSR and he started thinking out loud about lightweight titanium skins.
He mentioned a few hints and did not swear me to secrecy: cheekpiece, buttpad, and spare magwell. I also mentioned the 2# weight loss of the PSR and he started thinking out loud about lightweight titanium skins.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
This is a composite handguard I built - So far it's held up to multiple matches, including some pretty heavy abuse.
(This is the CD picture from their biathlon).
My standard SRS handguard (quadrail) weighs ~1.24lb.
This (closer to covert length) weighs 0.32 lb. I'm going to make a longer (SRS length) one, which would probably weigh in around 0.44lb.
Not really setup to manufacture these large scale, I have done some composite assemblies in the past, but the tooling to get everything lined up would take some time, and I do the bonds to try to prevent carbon to aluminum contact. If there was sincere interest I could look at having these made. There is a flush cup swivel on the left side, and a I put a small section of magpul polymer rail on the bottom of this handguard.
Anyway, I know the different gen's might have a little different weight on the handguards, and I've seen some other SRS owners that have removed material, so if you are not running NVG's, there is potentially some weight savings there.
This is a composite handguard I built - So far it's held up to multiple matches, including some pretty heavy abuse.
(This is the CD picture from their biathlon).
My standard SRS handguard (quadrail) weighs ~1.24lb.
This (closer to covert length) weighs 0.32 lb. I'm going to make a longer (SRS length) one, which would probably weigh in around 0.44lb.
Not really setup to manufacture these large scale, I have done some composite assemblies in the past, but the tooling to get everything lined up would take some time, and I do the bonds to try to prevent carbon to aluminum contact. If there was sincere interest I could look at having these made. There is a flush cup swivel on the left side, and a I put a small section of magpul polymer rail on the bottom of this handguard.
Anyway, I know the different gen's might have a little different weight on the handguards, and I've seen some other SRS owners that have removed material, so if you are not running NVG's, there is potentially some weight savings there.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Took out the SRS today with the .308 barrel Zeroed, shot it the 6.5 Creedmoor from SAC (laser beam) and the new .338 LPM barrel. Finished up but the .308 back in and fired the last 4 rounds of M118LR I had at 100yds.
Untitled by Practical Tactical Firearms, on Flickr
Untitled by Practical Tactical Firearms, on Flickr
Truly amazing that it holds it zero like that after 3 barrel swaps, i love this gun!
Took out the SRS today with the .308 barrel Zeroed, shot it the 6.5 Creedmoor from SAC (laser beam) and the new .338 LPM barrel. Finished up but the .308 back in and fired the last 4 rounds of M118LR I had at 100yds.
Untitled by Practical Tactical Firearms, on Flickr
Untitled by Practical Tactical Firearms, on Flickr
Truly amazing that it holds it zero like that after 3 barrel swaps, i love this gun!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Love the pics, love the thread. You guys may have just turned me on to something new. Thank you.
Love the pics, love the thread. You guys may have just turned me on to something new. Thank you.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Untitled by Practical Tactical Firearms, on Flickr
Just got it finished being coated, big thanks to Zach for the awesome bolt knob and Boris for the great kit!
Untitled by Practical Tactical Firearms, on Flickr
Just got it finished being coated, big thanks to Zach for the awesome bolt knob and Boris for the great kit!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
That's a sweet setup. I like the paint job.
That's a sweet setup. I like the paint job.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Took my DTA SRS out to a 600yd match yesterday. I was shooting factory Black Hills 175gr 308win ammo. Ultimately I shot a 263-1x which is pretty impressive to me considering:
1- This was the second time behind the rifle
2- This was the first time shooting 600yds.... ever
3- My wind reading ability is slightly above Helen Keller
4- These were shots 26-65 on the barrel.
I love this thing!
Took my DTA SRS out to a 600yd match yesterday. I was shooting factory Black Hills 175gr 308win ammo. Ultimately I shot a 263-1x which is pretty impressive to me considering:
1- This was the second time behind the rifle
2- This was the first time shooting 600yds.... ever
3- My wind reading ability is slightly above Helen Keller
4- These were shots 26-65 on the barrel.
I love this thing!
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">Took my DTA SRS out to a 600yd match yesterday. I was shooting factory Black Hills 175gr 308win ammo. Ultimately I shot a 263-1x which is pretty impressive to me considering:
1- This was the second time behind the rifle
2- This was the first time shooting 600yds.... ever
3- My wind reading ability is slightly above Helen Keller
4- These were shots 26-65 on the barrel.
I love this thing! </div></div>
Awesome! Congrats
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Halcyon612</div><div class="ubbcode-body">Took my DTA SRS out to a 600yd match yesterday. I was shooting factory Black Hills 175gr 308win ammo. Ultimately I shot a 263-1x which is pretty impressive to me considering:
1- This was the second time behind the rifle
2- This was the first time shooting 600yds.... ever
3- My wind reading ability is slightly above Helen Keller
4- These were shots 26-65 on the barrel.
I love this thing! </div></div>
Awesome! Congrats
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Since this is the official DTA thread, here is a link to my review with SAC barrel.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3510430
Just FYI, feel free to add your comments.
Since this is the official DTA thread, here is a link to my review with SAC barrel.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3510430
Just FYI, feel free to add your comments.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vkc</div><div class="ubbcode-body">Since this is the official DTA thread, here is a link to my review with SAC barrel.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3510430
Just FYI, feel free to add your comments. </div></div>
great review
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vkc</div><div class="ubbcode-body">Since this is the official DTA thread, here is a link to my review with SAC barrel.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3510430
Just FYI, feel free to add your comments. </div></div>
great review
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Can anyone enlighten us about the new bolt changes?
Can anyone enlighten us about the new bolt changes?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
The only bolt changes I know about is the change to the ball shaped handle, and the firing pin bushing. Have you heard of something else?
The only bolt changes I know about is the change to the ball shaped handle, and the firing pin bushing. Have you heard of something else?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
...something about an inter-changable bolt face????
-what do I know.
...something about an inter-changable bolt face????
-what do I know.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
2012 Pronghorn Hunt in the books.
Mine shot at 528 yards in an 8mph full value wind.
DTA Covert with Factory 26" with Desert Tactical Munitions 7WSM 168 gr Berger bullets and DTA's Titanium Suppressor.
Dads was shot at 264 yards with a DTA Covert w/ 16" .308 barrel and Desert Tactical Munitions Match .308, 175 gr SMK.
2012 Pronghorn Hunt in the books.
Mine shot at 528 yards in an 8mph full value wind.
DTA Covert with Factory 26" with Desert Tactical Munitions 7WSM 168 gr Berger bullets and DTA's Titanium Suppressor.
Dads was shot at 264 yards with a DTA Covert w/ 16" .308 barrel and Desert Tactical Munitions Match .308, 175 gr SMK.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Any idea as to when a left hand version will be available?
Any idea as to when a left hand version will be available?
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available?</div></div>
Probably when your avatar flies...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available?</div></div>
Probably when your avatar flies...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed....After fondling the .308 covert it feels like off hand/standing shots left handed would be easier than shooting a left hand gun.
Then for bench work shoot right handed as needed. I am more left eye dominant, but can flip things around as needed. Shoot pistols either way also...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed....After fondling the .308 covert it feels like off hand/standing shots left handed would be easier than shooting a left hand gun.
Then for bench work shoot right handed as needed. I am more left eye dominant, but can flip things around as needed. Shoot pistols either way also...
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scubadds</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed....After fondling the .308 covert it feels like off hand/standing shots left handed would be easier than shooting a left hand gun.
Then for bench work shoot right handed as needed. I am more left eye dominant, but can flip things around as needed. Shoot pistols either way also... </div></div>
I hear ya, I want so bad I'm considering selling off one of my custom rifles to fund it
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scubadds</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed....After fondling the .308 covert it feels like off hand/standing shots left handed would be easier than shooting a left hand gun.
Then for bench work shoot right handed as needed. I am more left eye dominant, but can flip things around as needed. Shoot pistols either way also... </div></div>
I hear ya, I want so bad I'm considering selling off one of my custom rifles to fund it
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scubadds</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed... .. </div></div>
Right after he learns to shoot right handed, they'll release the lefty model. Maybe they can call it the SLS.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scubadds</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andybull</div><div class="ubbcode-body">Any idea as to when a left hand version will be available? </div></div>
I have decided I want one so bad, I am going to learn to shoot right handed... .. </div></div>
Right after he learns to shoot right handed, they'll release the lefty model. Maybe they can call it the SLS.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Hats off to the guys and girls at DTA, i had one of the screws on my chassis just in front of the trigger guard loosen overtime and fall out somewhere during shooting or in transit. I called them up and explained the problem, they took my info and mailed me the screw. I have a Gen 1 chassis almost 4yrs old and this is the first and only issue i have had. Thanks for the great cust service. I have never herd of anyone else having this issue, but you all may just want to check yours during your regular cleaning from time to time just to make sure they are not loose. Keep up the good work guys.
Hats off to the guys and girls at DTA, i had one of the screws on my chassis just in front of the trigger guard loosen overtime and fall out somewhere during shooting or in transit. I called them up and explained the problem, they took my info and mailed me the screw. I have a Gen 1 chassis almost 4yrs old and this is the first and only issue i have had. Thanks for the great cust service. I have never herd of anyone else having this issue, but you all may just want to check yours during your regular cleaning from time to time just to make sure they are not loose. Keep up the good work guys.
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Razor74</div><div class="ubbcode-body">Hats off to the guys and girls at DTA, i had one of the screws on my chassis just in front of the trigger guard loosen overtime and fall out somewhere during shooting or in transit. I called them up and explained the problem, they took my info and mailed me the screw. I have a Gen 1 chassis almost 4yrs old and this is the first and only issue i have had. Thanks for the great cust service. I have never herd of anyone else having this issue, but you all may just want to check yours during your regular cleaning from time to time just to make sure they are not loose. Keep up the good work guys. </div></div>
I had most of the screws in my rifle loosen over time including the scope. I took them all out and reinstalled with purple loctite. Just enough hold for small screws. The scope I just check about every other outing. That was about a year or so back and no more problems. The vibration can loosen them as well as the heating and cooling of the plastic skins. Not an issue of DT screwing up....just the way it is. Check them occasionally.
Frank
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Razor74</div><div class="ubbcode-body">Hats off to the guys and girls at DTA, i had one of the screws on my chassis just in front of the trigger guard loosen overtime and fall out somewhere during shooting or in transit. I called them up and explained the problem, they took my info and mailed me the screw. I have a Gen 1 chassis almost 4yrs old and this is the first and only issue i have had. Thanks for the great cust service. I have never herd of anyone else having this issue, but you all may just want to check yours during your regular cleaning from time to time just to make sure they are not loose. Keep up the good work guys. </div></div>
I had most of the screws in my rifle loosen over time including the scope. I took them all out and reinstalled with purple loctite. Just enough hold for small screws. The scope I just check about every other outing. That was about a year or so back and no more problems. The vibration can loosen them as well as the heating and cooling of the plastic skins. Not an issue of DT screwing up....just the way it is. Check them occasionally.
Frank
Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread
Hey guys,
New employee of DTA's and basically noob to most things shooting...
Got the opportunity to do a caribou hunt on the north slope of Alaska a few weeks back. had a great time and got into some bou...
DTA SRS Covert w 16" barrel chambered in .308
DTM .338 match ammo
250 yds on the move
Hey guys,
New employee of DTA's and basically noob to most things shooting...
Got the opportunity to do a caribou hunt on the north slope of Alaska a few weeks back. had a great time and got into some bou...
DTA SRS Covert w 16" barrel chambered in .308
DTM .338 match ammo
250 yds on the move
