PT&G bottom metal - How close a fit to Badger M4

[buckey]

Does the PT&G tactical floor-plate fit the inlet for a Badger M4 floor-plate??

I have a stock inletted for a Badger M4 & was wondering if I could use the PT&G model to save some serious $$$ on my build??

Badger M4 floor-plate costs around $340 versus $120 for the PT&G tactical floor-plate!!

 

[jephs422]

Re: PT&G bottom metal - How close a fit to Badger M4

I used a PTG bottom metal on my Manners that was inletted for a badger and it dropped right in.

 

[buckey]

Re: PT&G bottom metal - How close a fit to Badger M4

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jephs422</div><div class="ubbcode-body">I used a PTG bottom metal on my Manners that was inletted for a badger and it dropped right in. </div></div>

Did you use the PT&G "tactical" floor-plate model or their "BDL" model??

 

[buckey]

Re: PT&G bottom metal - How close a fit to Badger M4

Any other help??

 

[jephs422]

Re: PT&G bottom metal - How close a fit to Badger M4

Honestly, I have no idea. I just bought one here in the classifieds. I didn't know there were different ones.

And I don't think I read the post completely, I used the PTG DBM, sorry.

 

[KelsonAK]

Re: PT&G bottom metal - How close a fit to Badger M4

Call PT&G - they have been very helpful in the past and should be able to give some guidance.

 

[Curnow26]

Re: PT&G bottom metal - How close a fit to Badger M4

If you are refering to the badger m4 floorplate i just did this and it is very close. the only inletting you should have to do is in the mag box are since the mag box is wider on the dbm. also if you are refering to the badger m5 dbm cutout the ptg should drop right in. Hope this helps.

 

[buckey]

Re: PT&G bottom metal - How close a fit to Badger M4

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Curnow26</div><div class="ubbcode-body">If you are refering to the badger m4 floorplate i just did this and it is very close. the only inletting you should have to do is in the mag box are since the mag box is wider on the dbm. also if you are refering to the badger m5 dbm cutout the ptg should drop right in. Hope this helps. </div></div>

I am referring the the Badger M4 floor plate - its a "BDL" type set-up.