Re: MK12 MOD-0 LETS SEE EM!
A few more pics to keep this thread going:
A few more pics to keep this thread going:
- Thread starter VJJPunisher
- Start date
Re: MK12 MOD-0 LETS SEE EM!
Man this ole thread makes me homesick to shoot mine, my mod 0 is truly tied for first place for my favorite rifle to take out shootin, accurate, no recoil, quiet with the ops 12th attached, just a pleasure to shoot
Man this ole thread makes me homesick to shoot mine, my mod 0 is truly tied for first place for my favorite rifle to take out shootin, accurate, no recoil, quiet with the ops 12th attached, just a pleasure to shoot
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hyena74</div><div class="ubbcode-body">i havent been to pri's page in a while, but just looked this evening:
http://www.precisionreflex.com/Detail.aspx?PROD=725130&CAT=4824
i bought a complete mk12 mod 0 upper with the sights and bolt and all the fixin's and it was right at 2k...like 1998.00 iirc back in 2009.
looking at their site now, it looks like they are 1475.00
sureley they havent dropped 500.00 bucks since 2009.
i was wondering what gives and how they are cheaper if anyone knows.
are the pri uppers comparable with say high caliber or other high end mk12 builders?
thanks,
rob </div></div>
I have two pri uppers and they both shoot! They use douglas barrells, or at least mine are. One of the reasons they are cheaper now is arms doenst make the swan sleeve anymore so everyone is useing the PRI clone sleeve.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hyena74</div><div class="ubbcode-body">i havent been to pri's page in a while, but just looked this evening:
http://www.precisionreflex.com/Detail.aspx?PROD=725130&CAT=4824
i bought a complete mk12 mod 0 upper with the sights and bolt and all the fixin's and it was right at 2k...like 1998.00 iirc back in 2009.
looking at their site now, it looks like they are 1475.00
sureley they havent dropped 500.00 bucks since 2009.
i was wondering what gives and how they are cheaper if anyone knows.
are the pri uppers comparable with say high caliber or other high end mk12 builders?
thanks,
rob </div></div>
I have two pri uppers and they both shoot! They use douglas barrells, or at least mine are. One of the reasons they are cheaper now is arms doenst make the swan sleeve anymore so everyone is useing the PRI clone sleeve.
Re: MK12 MOD-0 LETS SEE EM!
http://i1123.photobucket.com/albums/l558/Ultra011/b2da2acf975d4d741f7cf04986442969.jpg
http://i1123.photobucket.com/albums/l558/Ultra011/eec1ca9e2398ef09e8ada52dadd9c4ca.jpg
MK12 MOD 1 & MK12 MOD 2
http://i1123.photobucket.com/albums/l558/Ultra011/b2da2acf975d4d741f7cf04986442969.jpg
http://i1123.photobucket.com/albums/l558/Ultra011/eec1ca9e2398ef09e8ada52dadd9c4ca.jpg
MK12 MOD 1 & MK12 MOD 2
Re: MK12 MOD-0 LETS SEE EM!
For ultra01
MK12 MOD 0 & MK12 MOD 1.
For ultra01
MK12 MOD 0 & MK12 MOD 1.
Re: MK12 MOD-0 LETS SEE EM!
Re: MK12 MOD-0 LETS SEE EM!
Does this count? I own the MK12 in the upper picture too
Does this count? I own the MK12 in the upper picture too
Re: MK12 MOD-0 LETS SEE EM!
Mine again...Just cause I like lookin at em!
Mine again...Just cause I like lookin at em!
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postal0311</div><div class="ubbcode-body">What I find funny is immediatly after the AWB sunset, people ran out to buy rifles with bayonet lugs, telescoping stocks, and flash hiders
Now people are back building and buying superior rifles w/o bayo lugs, flash hiders, etc. And these SPR rifles are more effective, and reach out longer then many of the other "evil" configurations.
Funny. </div></div>
Considering where things are now, how prophetic. I wonder, perhaps, if someone, or some group, didn't figure it out, too?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postal0311</div><div class="ubbcode-body">What I find funny is immediatly after the AWB sunset, people ran out to buy rifles with bayonet lugs, telescoping stocks, and flash hiders
Now people are back building and buying superior rifles w/o bayo lugs, flash hiders, etc. And these SPR rifles are more effective, and reach out longer then many of the other "evil" configurations.
Funny. </div></div>
Considering where things are now, how prophetic. I wonder, perhaps, if someone, or some group, didn't figure it out, too?
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: FMJBT</div><div class="ubbcode-body">Finally settled on a scope. I ended up going with the Bushnell 3-12X44 FFP with G2DMR reticle, along with a set of ARMS #22 rings with the new adjustable QD levers.
From a recent trip to AZ:
</div></div>
What kind of handguard and top rail is that? I really dig that look.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: FMJBT</div><div class="ubbcode-body">Finally settled on a scope. I ended up going with the Bushnell 3-12X44 FFP with G2DMR reticle, along with a set of ARMS #22 rings with the new adjustable QD levers.
From a recent trip to AZ:
What kind of handguard and top rail is that? I really dig that look.
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SirDrinksAlot</div><div class="ubbcode-body">
What kind of handguard and top rail is that? I really dig that look. </div></div>
Its a PRI Gen III Delta with their proprietary top rail made for the delta forend. The overall look I was going for was an updated MK 12, like where the concept could have gone if they had played out the Mod 0 instead of developing the Mod 1.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SirDrinksAlot</div><div class="ubbcode-body">
What kind of handguard and top rail is that? I really dig that look. </div></div>
Its a PRI Gen III Delta with their proprietary top rail made for the delta forend. The overall look I was going for was an updated MK 12, like where the concept could have gone if they had played out the Mod 0 instead of developing the Mod 1.
Very nice rifles indeed.
Time to drag this thread back from the dead.
This is what happens when you have lots of spare time, leftover duracoat, and not enough ammo to go shooting with:
It seems duracoat goes on a bit glossy when applied by hand with brushes and Q-tips. I'm thinking it may need a topcoat of flat clearcoat to dull things down a bit.
This is what happens when you have lots of spare time, leftover duracoat, and not enough ammo to go shooting with:
It seems duracoat goes on a bit glossy when applied by hand with brushes and Q-tips. I'm thinking it may need a topcoat of flat clearcoat to dull things down a bit.
FMJBT, how did it work out painting the front and rear sights with the duracoat, have all the parts for my build but because of the color variation between upper, lower, pri handguard, arms, rail, sights and brake, I thought I might have to get a nice paint job on her. Would anyone know what the thinnest product is to use, duracoat, cerakote or other., thanks.
I didn't have any issues with duracoating the sights. I was kind of worried about the coating making the sights hard to flip up, but it goes on thin enough that it doesn't seem to impair function at all. Cerekote goes on even thinner from what I've read, although I haven't had a chance to use that stuff yet. For my application I went with duracoat because it doesn't need to be baked afterward. I didn't want to risk melting my rear sight, buttstock, pistol grip and trigger guard.
I might be going to MK12 Mod 0.5...
I'm thinking if ditching my A1 stock for a Sopmod on my MK12 Mod 0 inspired rifle.
I put the MK12 upper on my carbine lower this weekend to give it a try. The BCM gunfighter grip and SOPMOD stock were very comfortable to shoot with.
Your thoughts?
Current State:
WOA Upper / Barrel w/ PRI Tube and ARMS Rail - Assembled by ADCO
SWFA SS3-9 Scope in ARMS rings
ATLAS Bipod
LMT Lower
Hi-Speed DMR Trigger
Fulton Armory A1 Stock
MAGPUL Grip and Trigger Guard
Upcoming Changes:
Replace MIAD grip with BCM Gun Fighter - More vertical angle grip puts my trigger more comfortable on the trigger
Considering changing to B5 SOPMOD stock
I'm thinking if ditching my A1 stock for a Sopmod on my MK12 Mod 0 inspired rifle.
I put the MK12 upper on my carbine lower this weekend to give it a try. The BCM gunfighter grip and SOPMOD stock were very comfortable to shoot with.
Your thoughts?
Current State:
WOA Upper / Barrel w/ PRI Tube and ARMS Rail - Assembled by ADCO
SWFA SS3-9 Scope in ARMS rings
ATLAS Bipod
LMT Lower
Hi-Speed DMR Trigger
Fulton Armory A1 Stock
MAGPUL Grip and Trigger Guard
Upcoming Changes:
Replace MIAD grip with BCM Gun Fighter - More vertical angle grip puts my trigger more comfortable on the trigger
Considering changing to B5 SOPMOD stock
Last edited:
A few more pics to keep this thread going:
Awesome collection!
FMJBT, thanks for the info, have the parts for my build, but I figured I would get her painted first. I did hear that cerakote went on thinner, so I thinking along those lines.
What is the weight like one these Mod 0s guys? One of my next two build will be a precision 5.56 but I would like to keep the weight down on it.
Mod 1 but here you go.
How do you like the 2.5-10x32? And which reticle did you go with?
It's ok. Not a huge NF fan but it was better than a leupold. Didnt feel like spending more on the correct one. It has the npr-1 reticle instead of a mil dot.
Sent from my DROID RAZR using Tapatalk 2
Mod 1 but here you go.
Nexus, Is that a 20" barrel on your Mod 1? I'm trying to decide to keep the 20" barrel for a possible Mod 0 or cut it to 18.
What ever the spec barrel length is. I think it is 18" before the ops inc collar and break.
Sent from my DROID RAZR using Tapatalk 2
Question for you guys, I want to build a Mod 0, I have an old 20" CLE USMC Krieger contract service rifle barrel with all the sweet stampings on it. I'm thinking about having it cut for the build, but the sniper clone builder in me is screaming NO! I thought about a SAM-R build, but the problem is the front site flats milled into the barrel. PRI has the gas block for the MOD 0 that uses the flats. Any thoughts? Should I cut it?
Partial contribution, NSWC Mod 1 slowly coming together.
USGI A1 stock just arrived.
USGI A1 stock just arrived.
Partial contribution, NSWC Mod 1 slowly coming together.
USGI A1 stock just arrived.
Can't wait to see the finished build.
Gotcha. Very cool.
two trailer park girls go round the outside
Aah... One of my favorite threads, nice resurrect VJJ. I'll be bringing mine from a "Mod-Me" to a Mod-1 next month. Pulling the PRS, CQBSS and Atlas in lieu of an A2 stock, Leupold TS-30A2 and Harris on the Knights mount. The extra goodies are going to a 3-Gun build and my 16" .308 I'm finishing up. Maybe one of these days I'll be in the states long enough to start my Ops 12th purchase.
Which knights mount? I have been searching for what mount and I keep seeing the arms #32 mount is used. Did they also use a knights?
That helps a lot. Thanks.
Anytime bro, and that photo of the parts sheet is courtesy of ARFCOM. Me personally I prefer to not have QD up front. Fixed mounts are usually a bit more snug against the rails lowering the center of gravity and making for less stuff to catch the brush.
Gosh sometime's I wish I purchased a larue 
Gosh sometime's I wish I purchased a larue
da fuq???????????
I think someone is on a run for 100 posts. Two weeks until I have my MK12 back in hand...
Hey guys, I have gotten this MK12 bug from this thread! Anyway, I can up with a parts list for a Mod 0 and Mod 1 and was wonndering how correct it is. I want it to look authentic , however it doesn't have to be exact, so I figure I can go with different upper, lower, bcg, etc. What do you think "makes" the look?
Mod 0
Lower
Lower Receiver Colt
Lower Parts Kit Colt
Buttstock Assembly A2
Pistol Grip USGI
Trigger KAC 2 Stage
Upper
Upper Receiver Colt M4
Charging Handle PRI Gasbuster
Bolt Carrier Group Colt
Bolt Colt
Barrel Douglas/ Compass Lake Engineering
Hanguard PRI Gen III free-float
Front Sight PRI Flip Up Front Sight with .750 w/ set screws
Gas System Rifle Length
Flash Hider/ Brake Ops Inc Muzzle Break/ Collar
Sound Suppressor Ops Inc 12th Model
Mounts
Scope Mounts #22™ Throw Lever® Rings (Medium)
Tactical Ring Cap #22 TRC™ Tactical Ring Cap
Tactical Ring Rail #22 TRR™ Tactical Ring Rail
Bipod Adapter #32™ Throw Lever® Adapter for Harris-type Bi-pod
Swan Sleeve A.R.M.S. 38 SPR PEQ 2-3
Swan Sleeve SPR PEQ Top Rail For PRI Rifle Lgth Forearms
Back Up Iron Sights #40™L Low Profile Rear Sight
Bipod Harris 6-9in, Swivel, leg notches
Pod Loc KMW Pod Loc
Optics
Scope ?
Misc.
Ammo Fuck Ton of Mk 262
Sling Eagle Industries
Case Pelican 1700
Cleaning Rod Dewey
Cleaning Kit Otis
Magazines 20 Rd USGI
Scopes for these seem to be:
Mk 12 Mod 0 - Leupold 3.5-10x40 with M3 knobs (illum).
US Army Mk 12 Mod 1 - Leupold MR/T 3-9x36 w/ M3 knobs (illuminated)
US Marine Mk 12 Mod 1 - Leupold MR/T 2.5-8x36
US Navy Mk 12 Mod 1 - Nightforce NXS 2.5-10x24
What am I missing, or gotten incorrect?
Thanks!
Mod 0
Lower
Lower Receiver Colt
Lower Parts Kit Colt
Buttstock Assembly A2
Pistol Grip USGI
Trigger KAC 2 Stage
Upper
Upper Receiver Colt M4
Charging Handle PRI Gasbuster
Bolt Carrier Group Colt
Bolt Colt
Barrel Douglas/ Compass Lake Engineering
Hanguard PRI Gen III free-float
Front Sight PRI Flip Up Front Sight with .750 w/ set screws
Gas System Rifle Length
Flash Hider/ Brake Ops Inc Muzzle Break/ Collar
Sound Suppressor Ops Inc 12th Model
Mounts
Scope Mounts #22™ Throw Lever® Rings (Medium)
Tactical Ring Cap #22 TRC™ Tactical Ring Cap
Tactical Ring Rail #22 TRR™ Tactical Ring Rail
Bipod Adapter #32™ Throw Lever® Adapter for Harris-type Bi-pod
Swan Sleeve A.R.M.S. 38 SPR PEQ 2-3
Swan Sleeve SPR PEQ Top Rail For PRI Rifle Lgth Forearms
Back Up Iron Sights #40™L Low Profile Rear Sight
Bipod Harris 6-9in, Swivel, leg notches
Pod Loc KMW Pod Loc
Optics
Scope ?
Misc.
Ammo Fuck Ton of Mk 262
Sling Eagle Industries
Case Pelican 1700
Cleaning Rod Dewey
Cleaning Kit Otis
Magazines 20 Rd USGI
Scopes for these seem to be:
Mk 12 Mod 0 - Leupold 3.5-10x40 with M3 knobs (illum).
US Army Mk 12 Mod 1 - Leupold MR/T 3-9x36 w/ M3 knobs (illuminated)
US Marine Mk 12 Mod 1 - Leupold MR/T 2.5-8x36
US Navy Mk 12 Mod 1 - Nightforce NXS 2.5-10x24
What am I missing, or gotten incorrect?
Thanks!
Mod 1
Lower
Lower Receiver Colt
Lower Parts Kit Colt
Buttstock Assembly A2
Pistol Grip USGI
Trigger 4.5lb 2-Stage Match Trigger
Upper
Upper Receiver Colt M4
Charging Handle PRI Gasbuster
Bolt Carrier Group Colt
Bolt Colt
Barrel Douglas/ Compass Lake Engineering
Hanguard RAS Free-Floating Barrel (Long)
Front Sight M4 Flip-Up Front Sight
Gas Block ???
Gas System Rifle Length
Flash Hider/ Brake Ops Inc Muzzle Break/ Collar
Sound Suppressor Ops Inc 12th Model
O-Ring Crane O-Ring
Mounts
Scope Rings #22™ Throw Lever® Rings (High)
Tactical Ring Cap A.R.M.S. 22TRC
Tactical Ring Rail A.R.M.S. 22TRR
Bipod Adapter MWS Bipod Adapter
Back Up Iron Sights Flip-Up Rear Sight 200-600 Meter
Sling Rail Adapter QD Swivel & MWS Forend Rail Mount
Bipod Harris 6-9in, Swivel, leg notches
Pod Loc KMW Pod Loc
Optics
Scope
Misc.
Ammo Fuck Ton of Mk 262
Sling Eagle Industries
Case Pelican 1700
Cleaning Rod Dewey
Cleaning Kit Otis
Magazines 20 Rd USGI
Scopes for these seem to be:
Mk 12 Mod 0 - Leupold 3.5-10x40 with M3 knobs (illum).
US Army Mk 12 Mod 1 - Leupold MR/T 3-9x36 w/ M3 knobs (illuminated)
US Marine Mk 12 Mod 1 - Leupold MR/T 2.5-8x36
US Navy Mk 12 Mod 1 - Nightforce NXS 2.5-10x24
What am I missing, or gotten incorrect?
Lower
Lower Receiver Colt
Lower Parts Kit Colt
Buttstock Assembly A2
Pistol Grip USGI
Trigger 4.5lb 2-Stage Match Trigger
Upper
Upper Receiver Colt M4
Charging Handle PRI Gasbuster
Bolt Carrier Group Colt
Bolt Colt
Barrel Douglas/ Compass Lake Engineering
Hanguard RAS Free-Floating Barrel (Long)
Front Sight M4 Flip-Up Front Sight
Gas Block ???
Gas System Rifle Length
Flash Hider/ Brake Ops Inc Muzzle Break/ Collar
Sound Suppressor Ops Inc 12th Model
O-Ring Crane O-Ring
Mounts
Scope Rings #22™ Throw Lever® Rings (High)
Tactical Ring Cap A.R.M.S. 22TRC
Tactical Ring Rail A.R.M.S. 22TRR
Bipod Adapter MWS Bipod Adapter
Back Up Iron Sights Flip-Up Rear Sight 200-600 Meter
Sling Rail Adapter QD Swivel & MWS Forend Rail Mount
Bipod Harris 6-9in, Swivel, leg notches
Pod Loc KMW Pod Loc
Optics
Scope
Misc.
Ammo Fuck Ton of Mk 262
Sling Eagle Industries
Case Pelican 1700
Cleaning Rod Dewey
Cleaning Kit Otis
Magazines 20 Rd USGI
Scopes for these seem to be:
Mk 12 Mod 0 - Leupold 3.5-10x40 with M3 knobs (illum).
US Army Mk 12 Mod 1 - Leupold MR/T 3-9x36 w/ M3 knobs (illuminated)
US Marine Mk 12 Mod 1 - Leupold MR/T 2.5-8x36
US Navy Mk 12 Mod 1 - Nightforce NXS 2.5-10x24
What am I missing, or gotten incorrect?
Moar Reply!
I know I get an F for incomplete, but I'm working on it as funds come in slowly.
Next purchase is an optic as function comes first and I shoot a lot of matches with it. After that I'll switch out the brake and other details, then maybe the ops can.
Next purchase is an optic as function comes first and I shoot a lot of matches with it. After that I'll switch out the brake and other details, then maybe the ops can.
Last edited:
Can we throw a mod 1 in here so that all you mod 0's can feel better about yourselves?
Going to try to get rid of my Leupold fixed 10 with badger rings in favor of a horus reticle.
Going to try to get rid of my Leupold fixed 10 with badger rings in favor of a horus reticle.
Man, after a week on barfcom reading the mk12 thread, and looking this one over, several of these pics seem oddly familiar!
G
Guest
Guest
We run our ammo through this and bravo company rifles
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
NSWC MOD 1 (HCS)
Got a case of MK262 to break her in with next week
Got a case of MK262 to break her in with next week
Similar threads
