precision rifles... show em

[Tyler Kemp]

Specs:
Savage 10 SA (4.4 spacing) - AccuTrigger
- PTG fluted body (cerakoted in Graphite Black) and PTG milled 308 bolt head
- Bolt handle done by Phoenix Custom Rifles

Criterion Barrel 26" 260 Rem Match (longer freebore) Varmint Profile 1/8 twist
- JP Enterprise Bennie Cooley Muzzle Brake installed by Titan Weapons in Benbrook, TX)
- Barreled action Cerakoted in Graphite Black

XLR Chassis - Corvette Yellow (cerakoting done by Titan Weapons)

Vortex Viper PST 6-24x50 FFP MIL/MIL
Vortex rings (Seekins)


************************
sorry for the crappy cell phone pics - it is raining outside and camera batteries are dead

Holy cow I love the look of this gun!

 

[TacNoob]

The "New" look...

Do you prefer the AICS or the W3C?? I can't decide which one I want for my 700P in .308

 

[hintonrc51]

6.5X47 Lapua

Defiance Action RB/LP
Hart 1-8 barrel
Seekins base and bottom metal
MCM A5 stock
NF F1 mil/mil
Triad Stock Pack
S.O Tech front pad

 

[diderr]

PGWDTi Inc
260 Remington

Is that a PGW break, or an aftermarket? BTW Nice gun!

 

[Dude in GP]

Is that a PGW break, or an aftermarket? BTW Nice gun!

Thank you, it is a PGW brake. Really tames any recoil. My 10yr old boy loves to shoot it.

 

[islandermyk]

Do you prefer the AICS or the W3C?? I can't decide which one I want for my 700P in .308

I haven't shot it yet. I've been making few adjustments with the W3C (adjustments I didn't have with the AICS 1.5) to fit me, and doing a hell lot of dry firing. So far, I am loving the sh*t out of the W3C! I'm getting it cerakoted.. the stock finish seems really easy to get scratched up especially on the hand guard area. Unlike the AICS skins... the AICS skins can take a beating and are replaceable. There are pros and cons for both of'em.. for me, I just have A.D.D., lmao!

 

[WDB_AR10]

I think someone really like McMillan stocks
Very nice collection...

 

[tackleberry2000]

My newest endeavor. Rem 700 w 26" bbl. HS precision stock and BDM w 10 rd mag. The Harris bipod is now a Atlas. Leupold Mark 4 4-16X40 with 15 Moa base and rings. AI scope level indicator and tubb 2000 firing pin. Also a Timney trigger cuz the factory on sucked and wasnt worth a second pull. Taking her to the range Sunday.

 

[tfont48]

Tackleberry, I like that ADI I got one just like it

 

[TacNoob]

I haven't shot it yet. I've been making few adjustments with the W3C (adjustments I didn't have with the AICS 1.5) to fit me, and doing a hell lot of dry firing. So far, I am loving the sh*t out of the W3C! I'm getting it cerakoted.. the stock finish seems really easy to get scratched up especially on the hand guard area. Unlike the AICS skins... the AICS skins can take a beating and are replaceable. There are pros and cons for both of'em.. for me, I just have A.D.D., lmao!

Lol ya I know what you mean. I've been stuck between the aics and the w3c for a while now. I love the look of both and they both have the features I'm looking for. Plus they each have multiple accessories that can be purchased after if necessary. Thanks for the info! Much appreciated

 

[RFutch]

.308 20" 700 in a MCS-T Mini Chassis
Mk6 3-18x44

 

[Big Bronze Rim]

Remington SPS Tactical in .308
Bushnell 6-24 Elite Tactical w/G2 reticle
Badger Rings/ Weaver bedded 20Moa base
Manners T4a bedded with Devcon
Homemade Bolt Knob
Wyatt's Bottom Metal
Flatline Ops Level
Harris 6-9 BRS bipod

 

[The salmon]

I started doing my own work a while ago for various reasons which I wont go into here.

My first ground up tactical build:

It shoots

Yup its a BAT

6.5x47, .290" neck and throated for 123g Scenars.

What color paint is that on the barrel

 

[The salmon]

What color paint is the barrel

 

[The salmon]

Hi medic103

What color paint is on the barrel

 

[The salmon]

Hi medic103
What color paint is on the barrel

 

[42N8 1]

just got the PST and got everything together. unfortunately all the recommendations i saw to go straight seekins low on this site yielded not enough clearance for butler creeks. so i don't even know if it's worth going to shoot until i can get some higher rings. :\

What colors did you use on that stock?

 

[blueace]

New Kilo-51 by Tac Ops.

 

[Fenix Mike]

My first "custom" rifle that required assembly...
AICS AX chassis
Remington 700P action/barrel in 308
Nightforce ATACR

 

[tacticalpanda]

Nice. I don't know how you decide which one to shoot.

 

[trigger29]

Longrifles Inc.

Fluting by Kampfeld custom
Sniper gray Cerakote with graphite black flutes by Longrifles
Defiance Rebel
Bartlien 5R MTU @28"
Longrifles Inc. brake
Thunderbeast 338p-1 suppressor (In ATF purgatory yet)
Manners T4A w/ Tubbs 4 way butt
Jewell trigger
Seekins DBM
Badger DMR rings
Nightforce NXS 5.5-22x50 MOAR
Atlas bipod

<a href="http://s131.photobucket.com/user/trigger24/media/Kalli/100_3209_crop.jpg.html" target="_blank"><img src="http://i131.photobucket.com/albums/p304/trigger24/Kalli/100_3209_crop.jpg" border="0" alt=" photo 100_3209_crop.jpg"/></a>


<a href="http://s131.photobucket.com/user/trigger24/media/Kalli/100_3204_crop.jpg.html" target="_blank"><img src="http://i131.photobucket.com/albums/p304/trigger24/Kalli/100_3204_crop.jpg" border="0" alt=" photo 100_3204_crop.jpg"/></a>

<a href="http://s131.photobucket.com/user/trigger24/media/Kalli/100_3203_crop.jpg.html" target="_blank"><img src="http://i131.photobucket.com/albums/p304/trigger24/Kalli/100_3203_crop.jpg" border="0" alt=" photo 100_3203_crop.jpg"/></a>

 

[Shanerbanner10]

Rifles in my signature

Remington 700 reciever
PT&G Bolt
Trued and all that good stuff
Brux 1:10 MTU 24" with AAC 51t brake from 76.2-SD Suppressor
McRees Gen4 Chassis
AD-Recon-Low QD rings
Bushnell 3.5-21x50 HDMR H58 (original from Horus)
Harris Bi-Pod
Timney 517 Trigger 1.5#

All work and paint done by Deadly Precision Gunsmithing.

 

[220 Swift AI]

This is a work in process still waiting on a few parts and my 2 viper pst for my other semi custom to.

 

[santee116]

Upgraded my hunting rig. It used to sit in a HTG. Just got this new stock in today.

6.5-284
Stiller Predator LA
Jewell
PTG bottom metal
ABS wrapped Rock liner
McMillan Adj. Tactical Hunter in McMillan 5 color camo
Zeiss Diavari 6-24x56

This new stock feels much better than the old. I can get a much better cheek weld. The beefier front end also feels great. Can't wait to shoot it this weekend.

The stock weighs 2.6 lbs, exactly the same weight as my old HTG with sniper fill. The whole rig, minus the bi-pod weighs exactly 11.0 lbs unloaded. 11.6 with the bi-pod.

 

[TacNoob]

My first "custom" rifle that required assembly...
AICS AX chassis
Remington 700P action/barrel in 308
Nightforce ATACR

Nice set-up! How are you liking the ATACR?? I've read nothing but excellent reviews on them.

 

[Fenix Mike]

Nice set-up! How are you liking the ATACR?? I've read nothing but excellent reviews on them.

It was like losing my virginity all over again... Incredible turrets, the MOAR reticle is AWESOME and DEAD ON for ranging and sighting in, crystal clear glass, plus with the 34mm tube it just looks bad ass.

 

[Shotplacement]

I love those 300 WSM especially the ones with the AWG stocks

 

[Robar3552]

Robar SR90 .308 with Leopoldo M1 10x

 

[Viper1]

In all of my sporting and working rifles and shotguns I have always prided myself on buying the best. It often requires sacrifice in other areas but where my weapons are concerned there's right and...other.

However, I must say that I am quite stunned by the dedication to perfection and care with which the rigs shown in this thread are put together. When I joined Frank told me that the bar was high at SH and now I really see what he meant. Beautiful systems gentlemen and if you shoot as good as your equipment would suggest, nobody or nothing is safe within a mile of you guys.

In all, a challenging standard to meet.

Best,
Viper1

 

[jackal1]

Here is one of my rigs in a 6mm BR and a carbon wrapped barrel.
View attachment 5904

 

[JeremyC]

Howa stainless barreled action (Painted with Alumahyde II in Earth Brown, along with the bottom metal as well)
B&C stock (painted with Alumahyde II in OD Green)
Warne 20 moa rail, Maxima rings and SWFA 10x (painted with Alumahyde II Earth Brown)
TIS slip cuff QR sling and Triad stock pack
Harris Bipod also sprayed with Alumahyde II in OD Green

 

[jhart2424]

Here is a project that I am just finishing up.

It started out as a Savage Model 16 FHSS in .243

I bought the stock from a FCP-K off of ebay, then I modified it some by changing the grip angle, adding texture with Marine Tex, adding flush cups, and a Karsten cheek rest.
The gun originally had a hinged floorplate magazine, so I ordered the stock Savage bottom metal for the DBM. I also purchased a couple 10 round magazines from Darkeagle Customs.
The stock bolt knob is replaced by the Savage tactical version.
Painted with Duracoat in GAP Camo using a Bulldog Arms stencil kit - the colors are Marsh, ACU Grey Green, and Desert Brown

Bolt fluting by Sharp Shooter Supply
24" Stainless Criterion barrel in 22-250 with 1-9" twist - Light Varmint Contour
TPS 0 MOA base
Duracoated in Tactical Black

Most of the parts were ordered through Jim at Northland Shooter Supply; a really great guy to work with.

Now I am just waiting on the optics, which will be a Vortex Viper PST 6-24x50 SFP MOA

I like these colors...Now I wish I lived somewhere with snow and blue things to hide in.

 

[SmimL7]

 

[beenjammin]

My newest member.

 

[Bruiser_Joe]

nice Been, i've been mulling over and over in my head solidifying down to a few AI's... such nice guns

 

[Hotch]

This is nothing fancy compared to the trick equipment I'm seeing here. I'm just getting into long range shooting and I didn't want to break the bank. I'm more then happy with the performance of my Savage/Bushnell combo so far. I've only been able to shoot to about 600 yards but it works like a champ. I can't wait to stretch out to the distances the .338LM is designed for. The target was @ 100 yards while zeroing the scope. 2 in the left corner and 3 in the middle. It's shooting dead nuts center now @ 100 and I have enough MOA to get out to about 1500 yards without having to hold off. I'm having a little trouble finding ammo at the moment but as soon as I get the components together to reload, I'm going to wear that barrel out.

 

[DustDevil82]

My new toy all put together...

 

[Chris dore]

Beenjammin, What Spuhr mount are you running? MOA?

 

[Gary223]

My new long range tool..
Blueprinted rem 700
22" 1:8 heavy barrel
6.5 nem
Third eye tactical evo chassis system
Third eye tactical rings and 20moa rail
Atlas bipod
Sightron s3 6-24x50 lrmd
A bit of krylon to get it to blend.

Fired a cold bore fouling shot while out deer stalking at a crow 1164yds away missed it by 6" left .. Very happy with the gun is a real shooter, having a better trigger fitted next week.

 

[S12A]

My newest member.

awesome!

any more pics of this?

 

[Doomslayer]

Truvelo Counter Measure Sniper in .338 LM with Kahles 6 - 24 x 56 with Mil 6 reticle

.260 Rem, Rem 700 action, Broughton barrel, jewell trigger, Schmidt PMII 4 - 16.


Sent from my iPad using Tapatalk HD

 

[LongRifle75]

Truvelo Counter Measure Sniper in .338 LM with Kahles 6 - 24 x 56 with Mil 6 reticle

VERY nice!

 

[AT&T 71]

Old reliable Rem 700 SPS Tact w/Leupold VX-6 3-18 44mm

 

[Armed Ferret]

What colors did you use on that stock?

Thought it was obvious, but OD tan and black.

 

[Ledzep]

.308 20" 700 in a MCS-T Mini Chassis
Mk6 3-18x44

Nice! got a preview of what my rifle will look like when I get it. Pretty much exactly. With Camo paint, flutes, and different rings, that's all.

 

[Atanasius]

trg 22 308w

Here is mine. Nothing special, just factory TRG 22 in 308w. Will install 6.5 CM soon.

 

[_RJ_]

 

[colokraut]

SPR .260 Rem

SPR/bugholes-built barreled action, .260 Rem:

Stiller TAC30 A/W
Bartlein 1:8 M24 26"​

Timney 517, ViperSkins (w/ XL grip), TBAC 30P-1 (went back to jail for a little while longer)

10 rounds on the 2nd outing, shot without the can, and from a wobbly bench. Still trying to find a good load, this one was a little fast (avg. 2860fps, 44gr H4350, 139 Scenars in Lapua brass). 9 of them went into a .663 moa hole.

Considering the idiot behind the trigger, I'm really stoked!

 

[Buzzsaw]

Jeez, John Plaster would be proud of some of these

 

[JohnStump85]

Savage Axis .308 with custom built 15 round magazine! Magazine was built by a member of snipershide (z71rat) I highly recommend him! Here is his website RatMag High Capacity Magazines | Wix.com! Tell him that I referred you if you would like to buy any of his mags!