**JC Steel Targets Premium AR500 66% IPSC Double Flapper**

[JC Steel]

Hey Guys and Gals,

We are unveiling our new AR500 66% IPSC double flapper target system. You will love this target. It truly has a ton of offer at this price point. You can find them during our group buy which is most of the month of July.



We wanted to develop a Double flapper that had a head and chest flapper. We also wanted to make this target system rock solid and bombproof.

This target is rated for about anything. .22LR, handguns, rifles, etc.

---Here are the target specs---

66% IPSC target is premium 3/8" AR500.

The 2 flappers are Premium 1/2" AR500. 7 inch Chest Flapper and 2 inch head flapper

Permanently Attached Heavy duty T POST bracket



This is an awesome target because it is so simple. Essentially you will need a medium duty T POST. Drive it in the ground with a slight (3-4") lean forward toward the shooter. Slide the entire Target System over the T POST and bang away. No Bolts, No instructions, etc.



We have seen in the past, Double flappers like this go for way too much money, so we decided to create one that was cost effective, and offered a lifetime of use.

Here on Jubilee Youth Ranch, our students were able to make these targets from start to finish. All the cutting, welding, finishing, sanding, painting, and so on was done by a student on the ranch. And our proceeds go back to the youth ranch, helping the students with other programs, trades, skills, housing, food, etc.

Short Video

JC Steel Targets AR500 Double Flapper - YouTube



Front of AR500 IPSC double flapper Target

With the 2 flappers exposed

Back of AR500 Double Flapper, with permanently attached T POST bracket.

 

[Shoottothrill]

What are the dimensions in inches from bottom to top of shoulders, and also across the shoulders? Thanks

 

[JC Steel]

What are the dimensions in inches from bottom to top of shoulders, and also across the shoulders? Thanks

Very close to 17"x12" on the body only. The head is another 5" tall roughly.

 

[mark5pt56]

It appears that it's the "c" zone size with head

 

[wPAShooter1]

Awesome I can't wait to get one.

 

[bullseye13]

What's the price on these baby's?

 

[BGE541]

Price is listed in his Group Buy Section on here.

Great Targets get them while you can!!!

http://www.snipershide.com/shooting...500-steel-target-group-buy**.html#post2571420

What's the price on these baby's?

 

[M.rolen]

nice looking target!

 

[FALex]

damn, killer deal. Love those targets. Have you considered a simple hostage-type popper? That would rock too.

 

[JC Steel]

damn, killer deal. Love those targets. Have you considered a simple hostage-type popper? That would rock too.

Yeah we have a 66% hostage with one flapper if that's what your asking about. They are pretty awesome as well!

 

[bh-ltr]

Anyone ever tried these at distance with a 308? How far out can a 308 still just barely flip them? Can you still flip em at 800? have to come in to 600?

~Brett

 

[gasdoc09]

I think I need one.

What calibers will move the plates? From the video, it looks like 9mm will move the head but not the chest flappers. What about .45acp and .223?

 

[JC Steel]

Here are my experiments.
22lr and up will flip the head flapper.


9mm, moves the chest 4" but not all the way.
45acp. If hit right, moves all the way up and stops up top.
44mag, pretty much every shot moves to the top.
.223, moves to the top
308, moves to the top. Farthest I shot it was 500 and it performed great.
I also shot my 338 edge at 350 yards and again, worked great.

BUT, it also depends on how far you angle the target system toward the shooter. If angled only a couple inches, the smaller calibers do better.

 

[Cross C]

Great Looking target. Love your t post brackets!

 

[aaldape]

Just ordered mine, excited for it to arrive!

 

[JC Steel]

Thanks for the orders guys!!!

 

[JC Steel]

They are on sale right now! Check out our group buy for more info!

 

[Jeffvn]

I can't tell from the picture of the back of the target, but will it mount on a 2x2 (actually 1.75" x 1.75") steel square rod?

Jeffvn

 

[bh-ltr]

Is there any way that the rebar target mount kits could be included in the group buy? I'm not even fully sure how to place an order for them on the web site and being able to get a few of those might push me over into placing an order and throwing in some targets as well.

~Brett

 

[JC Steel]

I can't tell from the picture of the back of the target, but will it mount on a 2x2 (actually 1.75" x 1.75") steel square rod?

Jeffvn

Jeff, sorry, a 1.75x1.75 square will not fit.

 

[GONE BAD]

Just ordered mine . Thanks Jake. Dan

 

[JC Steel]

Just ordered mine . Thanks Jake. Dan

Awesome Dan, thanks for the order,

Just a reminder guys, the special on this target system will for for only a couple more days before it closes. Thanks for all the support.

 

[JC Steel]

Well, the talley is totaled!!! ANd in two weeks for the group buy, you guys ordered right around 95 double flappers!!!

We are very happy to provide a sweet target system for what we feel is a super reasonable price.

Many thanks from our students, myself, and JC Steel Targets, we have put a lot of sweat into these and I think these targets will provide lots of fun shooting for many years to come.

Again thanks

 

[JC Steel]

We have about 50 of these in stock and ready to ship. thanks for all the orders on these, they have been very popular for pistols and long range rifle work