• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Rifle Scopes Which Scope??

NC star octagonal series.

Great quality with exceptional strength qualities due to the increased stability provided by the octagonal rings.
Great for hunting rigs and comp rifles.
 
  • Like
Reactions: HolyCity73
Hunting to 500 yards? Someone correct me if Im wrong, but I think that’s going to require more scope than your typical hunting scope. Something more like a tactical scope, FFP, mil/mil, rz turrets.

The least expensive scope I would consider trying to use at that range is the SWFA 3-15 tactical.


I thought the SWFA reticle lines were abnormally thick, though. A step up would be the Vortex 3-15 Viper PST gen2.


Tracking is generally good but it is possible to get one of these with tracking issues, especially if you buy used. Still, if these are out of your price range, and you are dead set on reaching out to 500, then taking a chance in a used one would be the way to go. Vortex customer service is unbelievable, with a lifetime transferable warranty, so they will fix or replace it for you if you get a bad one, even if you buy used.

I actually have one if the vortex scopes and I upgraded to a $3000 Schmidt & Bender, but I’m holding onto the Vortex. It’s a good scope and I plan to put it on a back up rifle one day.
 
It depends on what rifle he using 500 yards is a pot shot with 6 Creedmoor. Not so much with a 223

I’ve used both of those in PRS matches and I agree the margin of error is much better with the creedmoor. But we are typically shooting 18 inch targets at that range. Average kill zone size for hunting is a nine inch diameter paper plate. With that target size, add wind and I’m looking at a challenge, even with a creedmoor. Mis-estimating wind by one mile per hour is about a 2.5 inch mistake at 500 yards with a creedmoor, and about double that with a 223 or 308. But maybe the OP is planning to take deer at 500 yards only in calm conditions?
 
  • Like
Reactions: Alabusa
I’ve used both of those in PRS matches and I agree the margin of error is much better with the creedmoor. But we are typically shooting 18 inch targets at that range. Average kill zone size for hunting is a nine inch diameter paper plate. With that target size, add wind and I’m looking at a challenge, even with a creedmoor. Mis-estimating wind by one mile per hour is about a 2.5 inch mistake at 500 yards with a creedmoor, and about double that with a 223 or 308. But maybe the OP is planning to take deer at 500 yards only in calm conditions?

What matches are you shooting 18” targets at 500?? Unless it’s a stage with a rope or moving platform, that’s a huge, huge target.
 
  • Like
Reactions: Hollywood 6mm
What matches are you shooting 18” targets at 500?? Unless it’s a stage with a rope or moving platform, that’s a huge, huge target.

I was going to ask the same thing. I've seen WAY more 8-10" or smaller targets at 500 than I have 18" targets. Shit, there was a stage at K&M a few weeks ago with 5" squares at 450, and you were shooting them from a rooftop.
 
  • Like
Reactions: Dthomas3523