• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

MPA Bag Bullet and MDT Bag Bullet on line

Rthur

Rthur

Philomath
Full Member
Minuteman
    • Apr 16, 2010
    14,930
    25,325
    55
    Not Chicago, Illinios
    I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
    I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
    I went to work trying to come up with a solution. After a few versions this is the answer to this question:
    Bag Bullet pics.jpg

    Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
    I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
    Here are a few pics of them on different chassis:
    DSCN0455.JPG
    BB10.png

    BB7.png


    They fit these models from MPA:
    BA Competition
    BA Lite
    BA Hybrid
    BA CZ-455/457
    BA Ultra Lite
    Let me know what you think.

    R
     
    Last edited:
    • Like
    Reactions: PinesAndProjectiles, aljones_315, Campguy308 and 1 other person
    Looks good! Fit and finish looks good. Any pictures on how it attaches? I used a spacer in between the ultra bag rider and chassis to make mine angle for the exact reason you mentioned.
     
    jsimonh said:
    Looks good! Fit and finish looks good. Any pictures on how it attaches? I used a spacer in between the ultra bag rider and chassis to make mine angle for the exact reason you mentioned.
    Click to expand...
    If you look closely at the picks you can see the barrel nut just above the decal.
    Basically a 1/4 x 20 countersunk cap/allen bolt with a barrel nut.
    Attaches very secure.
    PS- I'll get some pics
    DSCN0457.JPG

    DSCN0458.JPG
    DSCN0459.JPG


    R
     
    Last edited:
    I saw that, just didnt know if it threaded up through the bottom in one or two spots like the mpa ultras.
     
    Rthur said:
    I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
    I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
    I went to work trying to come up with a solution. After a few versions this is the answer to this question:
    View attachment 7131114
    Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
    I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
    Here are a few pics of them on different chassis:
    View attachment 7131117View attachment 7131118
    View attachment 7131141

    They fit these models from MPA:
    BA Competition
    BA Lite
    BA Hybrid
    BA CZ-455/457
    BA Ultra Lite
    Let me know what you think.

    R
    Click to expand...

    Very nice. Where would a person be able to get one of them.
     
    Rthur said:
    I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
    I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
    I went to work trying to come up with a solution. After a few versions this is the answer to this question:
    View attachment 7131114
    Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
    I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
    Here are a few pics of them on different chassis:
    View attachment 7131117View attachment 7131118
    View attachment 7131141

    They fit these models from MPA:
    BA Competition
    BA Lite
    BA Hybrid
    BA CZ-455/457
    BA Ultra Lite
    Let me know what you think.

    R
    Click to expand...
    Very interesting, would like to know how to get one
     
    For all of the the MDT chassis shooters I have a MDT ACC chassis on hand and will have the Bag Bullet version for it and other models
    soon.
    Excited to get this model out.

    R
     
    Last edited:
    How heavy is it. Compared to the bag rider weight? Looks great very interested.
     
    Excited the Bag Bullet MDT version is coming on line.
    A better description of what the Bag Bullet achieves.
    As one climbs in behind the rifle gross elevation adjustment is achieved quickly.
    This leaves the fine tuning of elevation of bag squeeze.
    We've found that under time a more consistent elevation on impact is achieved.
    Any questions you can post here or send me a PM.
    Also looking to get a PP account setup to expedite transactions.
    DSCN2134.JPG
    DSCN2135.JPG


    R
     
    • Like
    Reactions: gnochi
    Rthur said:
    I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
    I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
    I went to work trying to come up with a solution. After a few versions this is the answer to this question:
    View attachment 7131114
    Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
    I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
    Here are a few pics of them on different chassis:
    View attachment 7131117View attachment 7131118
    View attachment 7131141

    They fit these models from MPA:
    BA Competition
    BA Lite
    BA Hybrid
    BA CZ-455/457
    BA Ultra Lite
    Let me know what you think.

    R
    Click to expand...
    What’s the price for the black one?
     
    Rthur said:
    I've shot with a MPA chassis for several years and have liked it as well as any chassis I have shot. That said, something
    I've noticed is that I always felt that my rear bag was either to tall or to short for a consistent squeeze/elevation hold.
    I went to work trying to come up with a solution. After a few versions this is the answer to this question:
    View attachment 7131114
    Elevation adjustment is easily achieved on the clock and consistency is enhanced with a more light/relaxed squeeze.
    I've been using it on my Vudoo/MPA and 6 Creed/MPA for several months.
    Here are a few pics of them on different chassis:
    View attachment 7131117View attachment 7131118
    View attachment 7131141

    They fit these models from MPA:
    BA Competition
    BA Lite
    BA Hybrid
    BA CZ-455/457
    BA Ultra Lite
    Let me know what you think.

    R
    Click to expand...
    I'm interested in a black one. How much?
     
    Are these made in Canada? Price, and will it fit on 2nd Gen Oryx chassis with slot in bottom on butt stock. Magpul chassis. Thanks
     
    You must log in or register to reply here.

    Similar threads

    T
    Firearms MPA CZ455
    Replies
    1
    Views
    228
    Tylerj56
    T
    B
    Bag Bullets for MPA, MDT, AI and KRG
    Replies
    6
    Views
    715
    Bag Bullet
    B
    Mark_Dorman
    New MDT ACC Gen 2 - Rimfire Focused
    Replies
    25
    Views
    2K
    Mark_Dorman
    Mark_Dorman
    B
    Bag Bullets for MDT, MPA, AI and KRG
    Replies
    43
    Views
    5K
    Bag Bullet
    B
    chrisbradley_2001
    Rimfire CZ 455 MPA BA Lite chassis
    Replies
    15
    Views
    2K
    chrisbradley_2001
    chrisbradley_2001
    Top Bottom
    Back