DownhillFromHere

Latest activity Postings Featured content Achievements About Feedback Stats

• • D

    DownhillFromHere replied to the thread Beginner Could Use Some Advice.

    A good class will help establish fundamentals faster. But anyone can hang out a shingle as an "instructor." My first class wasn't all...

    Yesterday at 4:10 PM
  • D

    DownhillFromHere reacted to Rob01's post in the thread Beginner Could Use Some Advice with Like.

    So do you just want to spend money on stuff that looks cool or you want to actually learn how to use it?

    Thursday at 8:56 AM
  • D

    DownhillFromHere replied to the thread Beginner Could Use Some Advice.

    I quit hunting (primarily wing shooting) many years ago, after discovering that NSSA skeet let me shoot as much as I wanted (could...

    Monday at 10:18 AM
  • D

    DownhillFromHere replied to the thread Beginner Could Use Some Advice.

    OP, my question is: what is your goal - what do you want to accomplish regarding long range skill? If your goal is simply to put...

    Sunday at 8:16 PM
  • D

    DownhillFromHere replied to the thread Vudoo 360 issue with feeding..

    The further out you go - 200 and out, and especially 300+ - you will find that your elevation requirements seemingly change by the hour...

    Jul 13, 2024
  • D

    DownhillFromHere reacted to IndianCent's post in the thread Rookie Question - Blown Primer with Like.

    Thank you to everyone for your input. I learned a lot. I am loading a slower burning powder and have no longer any pressure issues or...

    Jul 12, 2024
  • D

    DownhillFromHere reacted to Short Round's post in the thread Vudoo 360 issue with feeding. with Like.

    Well I was up early so I made a tool. I had a USGI cleaning rod section with a cracked female side. A minute on the grinder and...

    Jul 11, 2024
  • D

    DownhillFromHere replied to the thread Reloading order of operations.

    Anneal w/ AMP/Aztec - Do this first because annealing leaves abrasive residue Tumble 1.5-2 hours in corncob with Lyman Turbo-Brite -...

    Jul 9, 2024
  • D

    DownhillFromHere reacted to Rob01's post in the thread Rookie Question - Blown Primer with Like.

    Yeah I am not sure you are using that tool as nothing "sticks out" or "fits in" when using it. It's not a case gauge but measures the...

    Jul 9, 2024
  • D

    DownhillFromHere replied to the thread Rookie Question - Blown Primer.

    ^^^^ THIS. With a possible exception. Read on for that. Do primers blow out of factory rounds? If not, there is a huge finger pointed...

    Jul 8, 2024
  • D

    DownhillFromHere reacted to flatland1's post in the thread Vudoo 360 issue with feeding. with Like.

    When swapping out extractor or pusher, it's best to get a large zip loc bag or any other plastic bag large enough, and work with the...

    Jul 6, 2024
  • D

    DownhillFromHere replied to the thread Vudoo 360 issue with feeding..

    Now that I think about it, Vudoo sent me a new spring/extractor kit when my rifle was new and we were working on my feed issue...

    Jul 3, 2024
  • D

    DownhillFromHere replied to the thread Vudoo 360 issue with feeding..

    A couple of thoughts. In my experience (five years with a gen-1 V22 in MPA BA Comp chassis, meeting other Vudoo owners at matches)...

    • 

    Jul 3, 2024
  • D

    DownhillFromHere replied to the thread Headspace question.

    Not a typo - I flat-out read it wrong. Corrected in my post. Thanks for pointing it out.

    Jun 29, 2024
  • D

    DownhillFromHere reacted to honzo's post in the thread Headspace question with Like.

    You probably have a typo. Cartridge rim is 0.036"-0.043", per spec 0.043" +0/-0.007")

    Jun 29, 2024

  Show older items
• Loading…
• Loading…
• Loading…
• Loading…
• Loading…