Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Super easy to do but just be gentle. If you have your 100m zero set on your rifle then you remove the indicator cap to expose the clutch/zero stop systyem. The newer ones have 4 screws holding the upper clutch in place. Loosen those screws 1-1.5 turns and then turn the upper clutch clockwise until it makes contact with the lower clutch. Back it off counter-clockwise about 1/4 turn and you should be pretty close. Tighten everything back down.
Make sure you only tighten those 4 clutch screws to 2 in/lbs or you will lock up that clutch for future adjustments.
Otherwise phlegm's technique is the other easy way to do it.
-pop off the cap -loosen the set screws -move the clutch away from the stop -tighten the screws -replace the cap -dial down however much you want -go through the procedure to set the ZS