• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Accessories Moved to reloading section

nnnn16

Private
Supporter
Full Member
Minuteman
May 14, 2010
168
17
Texas
Bought a TL3 with this barrel on it and did some load work up while i waited on a prc barrel. Around 600-700 rounds on the barrel total, 2-300 mine. Barrel shot very well with the 139gr scenar reloads. Factory stuff was around 3" at 400yds. It comes with redding premium deluxe die set #68446, 85 once fired with 15 unfired out of the case, and 86 once fired- trimmed and turned, 12 twice fired. All norma brass. I also have a box and a half of the scenars to go with it. It did have some thread lock on the threads so i buggered up the outside of the barrel a bit when i removed it because it slipped in the vice. Maybe 125 cases sized with the die set.
Bartlein
8 twist
I think it's an M24 contour I'll measure it when I get home.

PM for more pics or with questions.
450 shipped for the barrel, the dies, the brass, and the bullets.
20191228_113422.jpg
 
Last edited:
Lots of prep work already done. Barrel was very consistent. If you have a TL3 is just plug and play. I have load data and everything. Help the poor kid with entry fees.