AICS Magazines

[Rlandry]

What is the magazine of choice for durability and reliability?

 

[Zeroit]

P-mags so far, they run better then the high dollar accurate-mag
I have.
Just my opinion on my rifle, I wanted to see if it was any better than a P-mag.
I would still like to try some others out there.
What might work in your rifle(s) best?
My. 02

 

[Steel head]

It’s hard to beat Genuine AI mags.

I run another brand because in need more OAL capability.

Magpul is decent but my custom action hates them.
Accurate mags are decent as well and have a few options available.

MDT and ARC mags are options as well.

I run the ARC mags but lots of people here hate them

 

[longgunJR]

Action, Mag cut, stock/chassis, cartridge play a huge role on this one, what works for me may not work for you. AICS are what works for me on a Defiance Rebel action, McMillan A5, Badger BM shooting 6.5x47L.
AI or Accurate Mags may be a good place to start.

 

[b6graham]

AI Accurate MDT

they all may or may not need some assistance to run perfect

some people like the magpuls, but nah im good

 

[SN13]

KRG Bravo Long Action.

3.850 magazines?

Do Magpul AC mags work?

 

[DOA]

In my Defiance Deviant, factory AI's work great. The Pmags are ok but not as smooth running the bolt closed.

 

[seanh]

Interested in hearing this too. I have a couple of MDT plastic mags that I hate... Basically they're junk. They feed fine but if I have the bloated in my case oh, I have to be real careful how I handle my case or the rounds push up through the feed lips.

 

[MGN]

AW for all rifles that will use them, MDT for 223, AI for the rifles that don't have AW cuts

 

[Longrange403]

The mdt mags with no binder plate run the best in my rifles, every action will be different however

 

[SN13]

The mdt mags with no binder plate run the best in my rifles, every action will be different however

Your post, while promising, gives no info.

Chassis? Action? Which MDT mags?

 

[Eaglearcher20]

My Accurate Mag doesn't feed consistently with my MPA ESR chassis and Impact LA 300WM. Thinking it may need the feed lips adjusted? 1st custom rifle and i've never had to alter mags before.

 

[Longrange403]

Your post, while promising, gives no info.

Chassis? Action? Which MDT mags?

My bad, I have run the mdt metal no binder plate mags in a short action rem 700 .308 with a magpul dbm and a hs precision stock, a savage 10 .308 with a cdi precision bottom metal and mcmillan a3 stock, an rpr and a rem 700 300wm in an aiax chassis.

 

[308Gunner]

In my KRG Whiskey 3 the only mags that I have been able to run 100% is AI mags, I have tried Magpul, MDT and ARC and in the end I gave up. The action is a Surgeon 591

 

[hellzna]

KRG bravo/rem 700 here. Magpul ran fine off the bench and prone, but would bind with any forward pressure (off of bag/barricade). Switched to MDT mags (and tried accurate) and both fit tighter and feed without issue off of the bag.

 

[Crews]

I run the ARC mags but lots of people here hate them

I’m curious about this statement. I’ve never used one but they look like a cool concept on paper. What’s the major malfunction with them?

 

[b6graham]

I’m curious about this statement. I’ve never used one but they look like a cool concept on paper. What’s the major malfunction with them?

they don't feed

 

[Steel head]

I’m curious about this statement. I’ve never used one but they look like a cool concept on paper. What’s the major malfunction with them?

For me nothing
I use them for my 260 And 7SAUM.
7 saum mag have feed lips opened slightly.

 

[Crews]

they don't feed

Yeah I guess that could cause some issues. Haha!

 

[seanh]

Okay, I was wrong... They're PMAG Magpul that I have.

Will be looking into the metal MDT

 

[Campguy308]

My 700 action in MPA chassis runs like butter with AI, Accurate Mag, and Magpul with Creedmoor and 308 family.

Haven't had a reason to try any others