Wait a minute. In another thread you were all "RRS or nothing" and shit about leading horses to water.
Where's the picture of your setup? You have both of these? Or none of these?
- Thread starter 021411
- Start date
Wait a minute. In another thread you were all "RRS or nothing" and shit about leading horses to water.
Where's the picture of your setup? You have both of these? Or none of these?
Its already posted in this thread go back a few pages.
I never said RRS or nothing except for the Anvil30. It is that GOOD. @Strykervet
I never said RRS or nothing except for the Anvil30. It is that GOOD. @Strykervet
Last edited:
Two week for delivery given the mailing crisis with shipments. #winning
Don't have any experience with any other tripod to compare it to. For the the money felt like it was a good starting point. Went with the Anvil 30. Need one of the @midwestoffroad adapters to sure it up.
Going to try and get it out this weekend to mess with it a bit.
Don't have any experience with any other tripod to compare it to. For the the money felt like it was a good starting point. Went with the Anvil 30. Need one of the @midwestoffroad adapters to sure it up.
Going to try and get it out this weekend to mess with it a bit.
Go back one page. It helps secure the Anvil 30 to the tripod
In same boat. Mine arrived today. Just short of two weeks and MUCH faster than I expected. This is also my first serious tripod so I can't offer comparison. It seems super stable. Build quality seems outstanding. I am now just waiting on next batch of adapters from @midwestoffroad
In just doing them on a manual harding lathe. Then doing the counter bored holes on a Bridgeport. .
I ran the first operation on 12 plates which will get everyone currently on the list covered in the next week or two .
I snagged the "Used" one off Amazon earlier this week. $218. Open box, all that is missing is the adapter for the "bowl". Tripod appears to have only been removed from the plastic, then put back in.
Now just have to get time off work to go shooting. Thinking my Hog Saddle tripod is going up for sale.
Now just have to get time off work to go shooting. Thinking my Hog Saddle tripod is going up for sale.
If you can't or don't want to spend RRS $$ (great gear) Look for an Oben Carbon fiber Tripod - There was a big sale a few months ago. Originally$ 499 on sale for$ 299. Video model supports up to 39.5 lbs and is 3.5lbs total IIRC.
I’ve been watching for a “used one” and haven’t seen one. They must got quick.
Two questions: what is the actual ship time from Amazon.
has anyone tried one of these https://coloradotripod.com/products/highline-ballhead?variant=9808078798895 ?
has anyone tried one of these https://coloradotripod.com/products/highline-ballhead?variant=9808078798895 ?
Had an email with an estimated delivery date of 18th. The original was out to Aug.
I’ve ordered AS80C on Monday and it arrived Saturday. Pretty nice tripod for under $200. I was looking for a lighter setup
Or you will die instead of being outside enjoying yourself shooting.
That $520 dollars..... better plant to wait for about 30 years.
I did not start at zero I started at what I thought a nice tripod ought to cost, and every year I'm adding a bit. Some year the twain may meet, Things that never go on sale, never go on sale, until they do.
Brand new here to ARCA rail setups with tripods...I used pvc and an old sleeping pad. Im not forking out RRS money right now on a new tripod. Im being cheap I know...but with this tripod...
Will that ball head/ mounting system clamp on an ARCA rail?? Please help...any suggestions. I tried reading thru this forum but its pretty extensive at this point. Thanks again
Will that ball head/ mounting system clamp on an ARCA rail?? Please help...any suggestions. I tried reading thru this forum but its pretty extensive at this point. Thanks again
According to the description on leofoto's site https://www.leofoto.com/products_detail.php?id=252
the clamp is an ARCA Swiss Style and the BPL 50 plate is cut in a ARCA Swiss type dovetail however since arca-swiss does not have a particular standard it may or may not fit other brands accessories of the Arca Swiss type
the clamp is an ARCA Swiss Style and the BPL 50 plate is cut in a ARCA Swiss type dovetail however since arca-swiss does not have a particular standard it may or may not fit other brands accessories of the Arca Swiss type
Well thats annoying. I dont get why pic rails had to be reinvented
Well because they suck in a application where you shoot from a tripod, and need to slide the rifle in the dovetail. Same with a bipod on a dovetail, very flexible to be able to loosen, slide, tighten as situations dictate.
I come from a military background. Have yet to compete but I just don't see the need for all of that. Im sure if I compete ill find some use but pic rails have always done the job...im sure better things exist I've always just made the most of what I had
I have contacted the individuals that have reached out to me in order for the plates that I currently have available .
If you didn't see a PM then your In luck you are on the next run planned first week of July.
Anyone not able or no longer interested that I did send a message to just let me know so I can contact the next person on the list .
If you didn't see a PM then your In luck you are on the next run planned first week of July.
Anyone not able or no longer interested that I did send a message to just let me know so I can contact the next person on the list .
Attachments
Do you know if these plates also fit the cayer tripods troy (dst) sells?
Has anyone had their legs separate from the locking collar? Was out shooting yesterday and had one separate. I will be epoxying it tonight, but sucks that it failed that quickly. I guess I sorta expected something like this to happen sooner or later. Was just hoping it would have been later.
I got my RT80C from the Innorel store on AliExpress. Had it in a couple of weeks but I am in Australia.
Whoa, not good. Anybody else had this problem? From the feedback I have read most people were happy with the tripod. The feedback almost has me convinced to just get this setup and save money instead of a RRS tripod.
Yeah i love the tripod and I really don't think its gonna be a big issue(after the epoxy cures). It looks like the glue released after locking then trying to unlock the lower leg.
I think i remember a few other guys had this problem.
Yeah nothing some epoxy can't fix ... Your chances of getting anyone from inorell is slim to none from what I've heard
What range finder is this.
Open to suggestions....here is what I am trying to do:
Mount a Swaro spotter along with a Sig LRF on the tripod for spotting/ranging use. I would like to be able to remove those fairly quickly and use the tripod with either a HOG saddle or a RRS mount to shoot from in a hunting situation.
Mount a Swaro spotter along with a Sig LRF on the tripod for spotting/ranging use. I would like to be able to remove those fairly quickly and use the tripod with either a HOG saddle or a RRS mount to shoot from in a hunting situation.
Mount the spotter and LRF to an Abel table or something similar. Put an arca plate on the bottom. Also put an arca plate on the bottom of your Hog saddle. Then you can go between the two. Just put an arca clamp on the leveling base. You can do the same with picatinny but it seems that is falling out of favor. ADM makes a QD picatinny clamp.
get a Grey Ops Amp plate. has the arca rails and clamps all built in. I finally ran mine this past weekend and love it.
So i actually bought Innorel's ballhead and it was out of spec. I contacted them through Amazon and they shipped me a new one and returned the other one. I just dont want to go through that crap again, as I can just epoxy it and will probably be stronger lol.
Did you get the N52? What was out of spec?
Yep. The arca clamp wouldn't open wide enough. I tried a bunch of stuff and it was too narrow. They sent me another one and it is good now. I am gonna be selling it though. Going RRS.
Where is everyone buying their Anvil30's from? Best price? Just ordered the RT90c. Need to get the Midwest plate and Anvil 30 now..
Price is $350 just about everywhere. Apparently RRS is pretty militant about everyone maintaining the price!
I got mine from Thermal Optics Plus. They had it in stock and shipped very quickly! Happy to help out a small business owner.
I'm seeing hard to find in stock or over $400. Which is why I'm asking where guys got theirs recently and how much
I texted them but no response yet. We shall see
Similar threads
