• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

.300 Blackout Powders/Projectiles

endurokids

Private
Full Member
Minuteman
Mar 25, 2013
8
0
What are some good reliable powders and projectiles for the .300 ACC being shot out of a standard AR15 with 16" bbl at sonic/supersonic speeds for hunting deer?
I can do the testing but simply looking for a starting point here.
I do reload various other calibers now.
Thanks in advance!
 
If there was only a website, or something, where data was freely available...

 
  • Haha
Reactions: FuhQ
Thread revival for Supersonic Blackout hunting load info;

Anyone have a pet load for the Lehigh Defense 125gr Maximum Expansion? Intended for deer inside 150 yards, and don’t currently have any powder in my cabinet good for .300BLK. Ideally something that meters well from a Dillon powder drop, but if the general consensus is something else, that’s not a deal breaker. My rifle is a CVA Scout, so I won’t be shooting high volume anyways.

Above suggestions look like H110 is likely my best bet?
 
hi guys I'm new to the 300 blkout sub game. I have a 300 blkout with a 10" 1 in 8 twist pistol length gas system.

I'm wanting to load Hornady 190gr sub x bullets and I'm wondering if anyone has a couple of powder recommendations to start with that will cycle the gas gun and stay below 1050 fps? this will be shot with a 9" dead air sandman L suppressor.

thank you
 
hi guys I'm new to the 300 blkout sub game. I have a 300 blkout with a 10" 1 in 8 twist pistol length gas system.

I'm wanting to load Hornady 190gr sub x bullets and I'm wondering if anyone has a couple of powder recommendations to start with that will cycle the gas gun and stay below 1050 fps? this will be shot with a 9" dead air sandman L suppressor.

thank you
CFE BLK
 
hi guys I'm new to the 300 blkout sub game. I have a 300 blkout with a 10" 1 in 8 twist pistol length gas system.

I'm wanting to load Hornady 190gr sub x bullets and I'm wondering if anyone has a couple of powder recommendations to start with that will cycle the gas gun and stay below 1050 fps? this will be shot with a 9" dead air sandman L suppressor.

thank you
Check the pinned Subsonic thread in the Reloading Depot for the widest sample of info. That thread technically covers all things subsonic, but most posts since .300BLK’s inception have been .300BLK w/heavies related.

 
thanks guys for the info. I'm in the process of waiting for stuff to show up now. I went with Hornady sub x 190gr, CFE BLK powder, cci 400 primers, and starline brass