• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Maggie’s Motivational Pic Thread v2.0 - - New Rules - See Post #1

1612688599265.png
 
LOL somebody told me just now that during the Superbowl, they had an opening commentary for like 5 minutes about how the NFL is racist because they hired fewer "black coaches than white coaches"? Or some shit like that???

anim_lol.gif
anim_lol.gif
anim_lol.gif


How many TVs were turned OFF right after that? As if a lot of people are still watching this shit in the first place... Holy shit dawg...
 
In an effort to save $125, I made a ton of work for myself today... :)

-Indicate
-Turn Profile
-.950x24tpi threads, check fit
-Pull it, torque it, mark it, and mill the port (I was lazy, did one square port all the way thru)
-Indicate (bore was very straight, 2nd time I didn't use a spider and 'pivot pads')
-Bore front baffle
-Little baby crown

KIMG2279.JPG

KIMG2281.JPG
 
Satisfaction. <-------not the zeppelin song. The feeling of accomplishment. What's the value of that?
Awesome job!!
In an effort to save $125, I made a ton of work for myself today... :)

-Indicate
-Turn Profile
-.950x24tpi threads, check fit
-Pull it, torque it, mark it, and mill the port (I was lazy, did one square port all the way thru)
-Indicate (bore was very straight, 2nd time I didn't use a spider and 'pivot pads')
-Bore front baffle
-Little baby crown

View attachment 7549577
View attachment 7549578
 
Oops, I should have read before posting. Yes it does come across as I said that it was a Zeppelin song. That was not my intention. I intended to say that it's not a Zeppelin but a Stone's song. My bad, the written word compared to the mental thought. What a mess.
I feel obligated to point out that "Satisfaction" is in fact the Rolling Stones not Zep...

On the other hand there is this:


Not A Zep song.
 
In an effort to save $125, I made a ton of work for myself today... :)

-Indicate
-Turn Profile
-.950x24tpi threads, check fit
-Pull it, torque it, mark it, and mill the port (I was lazy, did one square port all the way thru)
-Indicate (bore was very straight, 2nd time I didn't use a spider and 'pivot pads')
-Bore front baffle
-Little baby crown

View attachment 7549577
View attachment 7549578
Nice. Looks like fun to me, not work.