The intent for this will be for hunting so I will be shooting off a bipod or tripod too. I built this in December and finally zeroed it last weekend so I don't have a lot of field experience with it. I personally don't worry about the size or weight so I don't have any regrets.
Rock River Arms 223 16 inch barrel with upgraded Midwest Industry hand guard, comes stock with factory ammo 3/4 moa guarantee
Attachments
Last edited:
Finally finished the 13.7 with a Razor.
Finished another 16 inch rifle. I need to grab a better charging handle, a better trigger and kns anti rotation pins. Cerakote in burnt bronze by Lakatosh Customs LLC. The stock trigger sucks but it is less horrible with the JP springs.
Aero Precision DTOM lower and DTOM upper receiver
BCM 15 inch KMR alpha handguard
Magpul UBR Gen 2
WOA 16 inch mid length .223 wylde
SLR set screw gas block
WMD nitromet gas tube
Brownells nitride m16 bcg
TBAC flash hider mount for my Ultra 5 suppressor
Mega Arms mil spec charging handle
Aero precision mil spec trigger with JP reduced power springs
Ergo tactical deluxe grip
Battle Arms Development mag catch and button
Seekins Precision bolt release
BCM aluminum pic rail
BCM sling qd adapter
BCM rail panels
Blue Force Gear vickers sling
Vortex Strike Eagle 1-8x24 in Vortex cantilever mount
Aero Precision DTOM lower and DTOM upper receiver
BCM 15 inch KMR alpha handguard
Magpul UBR Gen 2
WOA 16 inch mid length .223 wylde
SLR set screw gas block
WMD nitromet gas tube
Brownells nitride m16 bcg
TBAC flash hider mount for my Ultra 5 suppressor
Mega Arms mil spec charging handle
Aero precision mil spec trigger with JP reduced power springs
Ergo tactical deluxe grip
Battle Arms Development mag catch and button
Seekins Precision bolt release
BCM aluminum pic rail
BCM sling qd adapter
BCM rail panels
Blue Force Gear vickers sling
Vortex Strike Eagle 1-8x24 in Vortex cantilever mount
Attachments
New glass on the old .300 BLK. I’ve had a fixed 3x power Vortex Spitfire Prism scope on there since I built it back in the day (2012/2013…Somewhere around there 
), and it’s been a great optic for 100 yards and in plinking around…And even 200 yard plinking at the range. But with my new subsonic handloads for it, the Rainier Arms Match-Grade (Shilen 5R blank) has really started to shine, and has proven to be SO accurate and consistent at 100 & 200 yards, that I decided it was hunt-worthy…So it needed some variable magnification…
So, I found an absolutely smoking! deal on the new Vortex Strike Eagle (Gen 2) 1-8x24 scope with the AR-BDC3 reticle (MSRP $499) AND a Vortex CM-202 mount (MSRP $149), for $329 shipped (for both) to my door! So, I snagged one! It came in today, and everything was real, authentic, and still factory-sealed with tamper-proof plastic tabs.
), and it’s been a great optic for 100 yards and in plinking around…And even 200 yard plinking at the range. But with my new subsonic handloads for it, the Rainier Arms Match-Grade (Shilen 5R blank) has really started to shine, and has proven to be SO accurate and consistent at 100 & 200 yards, that I decided it was hunt-worthy…So it needed some variable magnification…So, I found an absolutely smoking! deal on the new Vortex Strike Eagle (Gen 2) 1-8x24 scope with the AR-BDC3 reticle (MSRP $499) AND a Vortex CM-202 mount (MSRP $149), for $329 shipped (for both) to my door! So, I snagged one! It came in today, and everything was real, authentic, and still factory-sealed with tamper-proof plastic tabs.
Last edited:
JMac Customs M4 (true-spec, low-shelf, 3-marking indicators) receivers…
Recent build:
SanTan Tactical STT15 lower
Midwest Industries 300 BLK 10.5 upper
CMC triggers CCT trigger
KNS anti walk pins
Surefire 3 prong and Warden
Larue/Troy BUIS
Viridian green laser hand stop
Trijicon MRO w/ Larue mount
Larue grip
Maxim Defense CQB brace
SanTan Tactical STT15 lower
Midwest Industries 300 BLK 10.5 upper
CMC triggers CCT trigger
KNS anti walk pins
Surefire 3 prong and Warden
Larue/Troy BUIS
Viridian green laser hand stop
Trijicon MRO w/ Larue mount
Larue grip
Maxim Defense CQB brace
A lot of nice ars here
That’s hard dick material right there!
Just finished putting an Atlas and a Burris RT15 in a Warne mount on Hunter's rifle. He built it when he was 12 for 3Gun, but I took off the AR1X and made these changes for him to shoot the SAC in September, just a few weeks after he finishes Basic Combat Training at Ft. Sill.
Attachments
Just got done tweaking this rifle to do matches in:
Used to be a Mk12 Mod H from PRI. After running the original config with the Leupold Mark4 side-by-side against the NF NXS 2.5-10x on my Mod 1 clone I finally decided to step out of the clone build and change things up, ended up putting a NF SHV on it. Heavily influenced by what @Trigger Monkey and @Brandon05_88 posted in the SPR/DMR matches thread.
Used to be a Mk12 Mod H from PRI. After running the original config with the Leupold Mark4 side-by-side against the NF NXS 2.5-10x on my Mod 1 clone I finally decided to step out of the clone build and change things up, ended up putting a NF SHV on it. Heavily influenced by what @Trigger Monkey and @Brandon05_88 posted in the SPR/DMR matches thread.
Last edited:
Well, how does it compare?Just got done tweaking this rifle to do matches in:
Used to be a Mk12 Mod H from PRI. After running the original config with the Leupold Mark4 side-by-side against the NF NXS 2.5-10x on my Mod 1 clone I finally decided to step out of the clone build and change things up, ended up putting a NF SHV on it. Heavily influenced by what @Trigger Monkey and @Brandon05_88 posted in the SPR/DMR matches thread.
Still waiting for that rocksett layer to finish curing before I test it out at the range. I'm happy with how everything fits and how stable that clubfoot is with a rear bag.
If you ever feel like trying a different stock, the BCM Mod 1 SOPMOD is a great stock for this kind of application.
BCM Gunfighter Mod 1 SOPMOD Stock
I had another review published that I wanted to share but really I wanted to highlight the Gunfighter Mod 1 SOPMOD stock from BCM. I wouldn't go so far as to say that I'm a fan boy but I've used a number of BCM products and I've generally been very happy with them. I guess it was last year I...
www.snipershide.com Cool. I'll check it out at some point.If you ever feel like trying a different stock, the BCM Mod 1 SOPMOD is a great stock for this kind of application.
BCM Gunfighter Mod 1 SOPMOD Stock
I had another review published that I wanted to share but really I wanted to highlight the Gunfighter Mod 1 SOPMOD stock from BCM. I wouldn't go so far as to say that I'm a fan boy but I've used a number of BCM products and I've generally been very happy with them. I guess it was last year I...
I just purchased the Springfield Armory Saint Victor PDW 5.5"bbl 5.56 below yesterday.
View attachment 7665774
Springfield Armory Saint Edge Pistol 10.3"bbl 5.56
Ruger AR-556 MPR 18"bbl 5.56
View attachment 7665774
Springfield Armory Saint Edge Pistol 10.3"bbl 5.56
Ruger AR-556 MPR 18"bbl 5.56
My go to shooter.
I know no charging handle, took the pic in the process of cleaning.
I know no charging handle, took the pic in the process of cleaning.
I like it. Kind of a mix of old and new. Throwback-Newback
Overkill TBAC 338 sr suppressor. Dominus k is still in Jail.
My HK MR223 setup
Moe+ grip
Atlas PRS
Spuhr QD
Athlon Cronus with Aimpoint T2
Ferro slingster
VTac sling mount
Moe+ grip
Atlas PRS
Spuhr QD
Athlon Cronus with Aimpoint T2
Ferro slingster
VTac sling mount
New video is up! If you like it, please go to the YT link, and hit the thumbs-up button, and the SUBSCRIBE button, and share it all over your social medias. I'm really trying to grow my channel. Any help is much appreciated! Thanks!
Top:
Noveske gen 1 receiver set
Centurion C4
Noveske 10.5" switch block
Trijicon ta44 acss
Radian bcg
Radian raptor sd & talon
Forward Controls design components
Vltor A5h2 w/ springco green
Geissele sd-e
DA Nomad
Modlite plhv2
Esd sling
Bottom:
Radian builders set
MÔS-TEK 9" 1:5 300BLK
SLR sentry 7
Radian components
Triggertech diamond
JP scs h2
Eotech exps2-2
DA Nomad L
Modlite plhv2
Esd sling
Reptilia grip
110gr tac-tx or discreet ballistics 188 selous
Noveske gen 2
Vltor vis 3
Noveske 14.5" 5.56
Pinned fcd 6315km
Vltor A5h3 w/ springco green
Geissele ssa-e
Forward Controls design components
Radian bcg, raptor sd & talon
Aimpoint T1
Silencerco omega
AXTS builders set with Radian/axts parts
Proof research 18" .223 wylde
Actually has a jp enhanced lmos bcg in it atm
Geissele hi-speed NM
Mapul prs
A2 buffer tube
Springco green
KynSHOT marksman buffer
Vortex razor gen 2 4.5x27x56
Geissele mount
Nomad
Battle arms pdw 7.5" 5.56
Trijicon ta44 acss
Geissele sd-3g
SLR sentry 7
Muzzle device getting replaced for a DA km for sandman k
BH 50gr tsx
Also planning on building a 5.5" 300 blk upper soon for it.
Last edited:
Good job. Any details on parts and pieces, I am still getting mine together.
@greg1147
Anything in particular? ARMS started making their Comp II M68 30mm carry handle optic mount again, after being out of production for a while. They were in stock a few weeks ago when I got mine.
The light is an older Surefire 6P from eBay in an Amazon mount....the prices on the 660s are ridiculous these days so I went with the 6P. Pressure pad is another eBay find, Solar Force from Hong Kong, I couldn’t find compatible tape switches from Surefire. The cord was way too long so I shortened it to around 6”. The ranger bands hold the switch and tend wiring.
Everything else is kind of hodgepodge, this started as a spare parts build and quickly spiraled out of control. Very happy with it. Haven’t shot it yet but it is nice and light compared to my other QRF builds.
Anything in particular? ARMS started making their Comp II M68 30mm carry handle optic mount again, after being out of production for a while. They were in stock a few weeks ago when I got mine.
The light is an older Surefire 6P from eBay in an Amazon mount....the prices on the 660s are ridiculous these days so I went with the 6P. Pressure pad is another eBay find, Solar Force from Hong Kong, I couldn’t find compatible tape switches from Surefire. The cord was way too long so I shortened it to around 6”. The ranger bands hold the switch and tend wiring.
Everything else is kind of hodgepodge, this started as a spare parts build and quickly spiraled out of control. Very happy with it. Haven’t shot it yet but it is nice and light compared to my other QRF builds.
Last edited:
Maybe just the camera angle but what barrel is on the A1 ? Looks mighty thick for a A1 pencil profile..? Looks thicker than a gov’t profile too? Could just be the angle tho as said..
It is a gov profile. The A1 is far from a correct clone. I built that last fall and finding parts was a hassle so it was as close as I could get with what was available. Makes me damn happy though!
New lower sitting with the 13.7 until my KAC upper alerts hit.
I'll be the first to admit that I haven't tried them all. Here's what (I think) I do know:
For a precision UPPER, the Vltor MUR is I believe a premier choice. Best one of which I'm aware, and has been for almost 20 years. Forged - stout as can be. Not a lightweight, either. Well engineered and well executed. Barrel extensions may require a tad of Locktite, since it is designed to work with anything. Guaranteed to rattle a little on most lowers, because it is purposely designed to work with ALL uppers. If yours is tight on your lower, it's due to tolerance stacking.
SanTan takes a different approach. For a precision upper/lower receiver set, SanTan is hard to beat. Let's go tight on tolerances!!! Don't try to slap your SanTan upper on anything but a SanTan lower. Plan on a solid 30 seconds with your heat gun on high to get that Proof Research CFW barrel extension to fit. The now discontinued Young MFG National Match bolt carriers would not even fit inside the early SanTan receivers.
Another thing with SanTan - The anodizing so so good that it makes the other aluminum parts on your gun look kinda cheap.
Had an AR with a Triji 1-8, UBR, and a 13.5” NSR that wasn’t a whole lot of fun to shoot at anything but man sized or bigger steel (reticle center covered a full mil, the damn thing was hard enough to zero) - decided to turn it into a wrong handed MK12 Mod H, and it’s now a ton of fun. Lighter, handier, and 3” plates at 200 yards are easy pickings.
I’m sure LPVOs have their place in an actual tactical environment, but I forgot how much easier “aim small, miss small” is with a traditional scope and the fine reticle.
I’m sure LPVOs have their place in an actual tactical environment, but I forgot how much easier “aim small, miss small” is with a traditional scope and the fine reticle.
Attachments
Similar threads
