Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Having an issue with a 12rd MDT magazine feeding a Curtis valor action. The rounds are exiting the feed lips before the bullet tips are up the chamber feed ramp. Causing the cases to jump up out of the magazine and not feed properly. Any ideas?
Did that on 6x47 in order to feed a Stiller action from AIAW mags. I don’t see how flaring is going to stop the case head from exiting the feed lips early and allow the case to fly up premature
Um….isn’t closing the feed lips a bit going to solve this? Or are you saying the case head gets out before the bullet is captured by anything on the front end…i.e. no matter what you do to the feed lips, the round will pop out too early?
Did that on 6x47 in order to feed a Stiller action from AIAW mags. I don’t see how flaring is going to stop the case head from exiting the feed lips early and allow the case to fly up premature
Having an issue with a 12rd MDT magazine feeding a Curtis valor action. The rounds are exiting the feed lips before the bullet tips are up the chamber feed ramp. Causing the cases to jump up out of the magazine and not feed properly. Any ideas?
I had an issue with my mdt br mags with my dasher and I solved it by adjusting the spring position on the follower. I simply pushed the spring further into the slot where it is riveted to. I don’t have a three lug Dasher, it is a Tikka. might be worth a try.