Recent content by 4sfed

Three of my four had the same issue. Find the scuff marks on the magazines that stick, and file (not sand) off a couple thousands. The modification won't even show if you use a fine tooth single-cut file.

It was in another thread. I'll see I can find it.

What do you think are the shortcomings of the Vudoo? It's as precise as any other 22 rimfire and it feeds reliably without damaging the bullet. Anything else is an accessory ... with dozens of off-the-shelf options. Oh yeah, the magazines are big and it's possible to load them incorrectly.

There are many choices of 22lr match ammo that are subsonic ... Eley, Lapua, RWS, Federal Ultra Match, etc

No, I have Range Buddy. I've seen an Apple app that lets you combine all the shots of a dot drill into one group.

I would like an Android app that did one group from multiple targets.

What angle rail are you using with the Vortex?

I'm using an MDT LSS-XL chassis with a Magpul PRS Gen 3 stock. . The only thing I miss is a folding stock when it comes time to clean the barrel.

You may have to remove a little material to get the magazines to drop freely. Look for the shiny spots where the magazine rubs and take a little off with a smooth file. I had to "adjust" three of my four magazines.

I took that comment to mean that the impact point will tell you how consistent the velocity is from shot to shot. That it's not necessary to measure it.

You did not mention detail cleaning the bolt. If the firing pin is dragging, it may not be hitting the rim consistently, affecting ignition. That will certainly affect velocity.

I have a little over 3500 rounds through mine. The mags feed flawlessly but 2 of the 4 do not drop free. There is a slight drag installing and removing them, but a light touch from my middle finger while holding the mag release with my index finger will knock them free.

Looks like you found a way to mount the Magnetospeed to the chassis instead of the barrel. Care to share the details/photos? BTW, nice shooting ... but I expect that from a Vudoo.

Try a soak in CLR (calcium, lime, rust) for a couple hours. The deposits come off with tap water and a soft brush.

Details on your rifle please. I did more testing today ... same results ... 0.5 MOA or less without the suppressor, lucky to get 1 MOA groups with.