Recent content by amp

Okay, that brings up another question: Steel or aluminum?

I'm looking for a set of 30mm Picatinny type scope rings for my bolt gun. Seems there are many options. What am I looking for in a set of scope rings? What are the differences between the brands?

Thanks guys, I appreciate the advice. I think I'm going with the Vortex PST ffp--if I can find one.

Is there anything in particular to look for as far a wear is concerned on these lathes? What's fair market value on something like this, if it's in good condition? I know that new ones are around $2900.

I found a used Grizzly G4003 for sale (looks like an older model). This is not the 4003G "gunsmith" model. Is this suitable for gunsmithing work?

For tactical type matches, how important is it to have a front focal plane scope? What do you have and why did you choose it? Thanks.

The Machine The Machine - Moons of Neptune - YouTube

I use a 45degree countersink bit in a drill press. Chuck it up, turn it on and just touch the primer pocket to the bit to remove the crimp. I also have the RCBS tool and it sucks.

I use a Sinclair hex type comparator. Sinclair Hex Style Bullet Comparators | Sinclair Intl

Thanks. What bottom metal is compatable with AW magazines? I like the idea of snapping the cartridge into the mag before closing the bolt. Seems to be some controversy as to whether or not it's ok to close the bolt on a loose round due to the extractor design.

I have an FN PBR (controlled round feed type) with a hinged floorplate. I'm considering converting it to a CDI or FN removeable magazine setup. Is it possible to load a round into the magazine, while it's installed in the rifle, as is the case with the fixed magazine?

Thanks guys. Just ordered the one with external loops.

I'm considering a Triad stock pack and am trying to decide between cartridge loops on the inside or the outside. Which do you prefer and why? Rifle is for range use and/or the occasional tactical match.

Thanks, DIBBS! I'll check it out.

Greetings gentlemen, Lurked for a long time and am looking forward to participating in the forums. Just to state where I'm coming from, I'm primarily an NRA Highpower shooter (Service Rifle) who has become interested in unknown distance practical/tactical shooting. I am a Distinguished...