Recent content by cerralvo78

Gunsnjeeps That make a lot of logic to me!!

THANKS FLIGHT762!!! i HAVE DONE THE DUMMY ROUNDS SET THEM AT 1.619" THEN AND AFTER I CHAMBER THEM IT GOES BACK TO 1.615 BOTH OF THESE CHAMBER OK SO SHOULD I LEAV IT ALONE AFTER FIRE(1.621") OR SHOULD I BUMP IT BACK DOWN TO .002" OR SHOULD I BUMPED A .001" BELOW THE AFTER CHAMBER SIZE (1.615")...

Thanks.....But my question would be should I bump back base on my fire form headspace( 1.621") or bump back from chamber headspace(1.615") ?? THANKS

Hi I have been reloading for the last six months After performing OCW I have found my perfect load on my LR 308 DPMS 24" Varget 43.2gn, lapua brass, WLR primers and 168 SMK COAL 2.230 (base to ogive) Headspace 1.619" This gave me 3 shot group .297" @ 100 yards(look at picture) My question is...

Thanks for your responses I tested and the scope/rifle did just fine Thanks a lot

I got a DPMS 308 24" with the Carbon Fiber Free Float Tube.... I bought a slighthly use steiner scope 5-25x56 with 34mm TPS rings, either low 1.025" or medium 1.185":confused: My question is if the gap in between the bottom of the scope and top of the tube it is ok? or a need more...

Thanks for your reply I just need to get actual poi vs poa data and make my own ballistic data card Thanks again

WOW...im not an expert and i have never shot 600 yards but according to my scope i can see a 12" target @ 100 yards @ 9X magnification and on my mil rectile it was about 3 mils according to my calculations....on my scope 600 yards 12" target(not 6") a 9X magnification my scope rectile will...

Need to know the height in inches from the middle of the barrel to the top of the rail on my DPMS 308 24" I have: Leupold Mark AR MOD 1 3-9x40mm AR-P.E.P.R. QD Mount I’m using several apps and the one I like more is Ballistic AE I know this is real important when making your...

decision has been made :D thanks for all the good information!!!! I choose the ssa because of the following according to people with the ssa on a dpms...it was a huge improvement over the stock i am an amateur but i got a lot of trigger time...so i do not want to over kill it less...

Do you think the hammer could broke because of " Dry firing" I think I did this a few times but not a lot!!

here is the link for the 2 stage trigger on my dpms 308 24" bb DPMS Two-Stage Trigger Group

I just found that I have on my 308 DPMS a Two-Stage Trigger Group And that what I tough was slag or play was really the 1.75lbs first stage and the second stage is set 4.5lbs -5.5lbs Now the main reason I'm buying a new trigger is because the stock one has a heavy pull and another main reason...

Thanks for the info!! I never put the kind of shooting I will be doing..... Mainly I will be doing long range precision shooting and occasionally hunting from a stand/deer blind Also in kind if new to this.... I have been shooting for about a year a mini14 and I have about 200 rounds on my...

I have been reading, researching and I do not know which Geissele Trigger to buy for my DPMS 308 24" I have only shoot this gun up to 100 yards....and it is real good .75 to .50 MOA all day long eventually i want to get into longer ranges up to 800 yards.... but i want a new trigger...