Recent content by ctrmass

Does anyone have coupon codes for Brownells? Is there a separate thread for them? I cant find any. Thanks!

Thanks. :D:D:D

Re: 18" SPR 6.5 Grendel Build Complete w/ Load DATA** Barrel: 20" 1/9 3 gr poly BHW case: Hornady powder: WC846 surplus weight: 29-29.1 gr primer: CCI Bullet: 120 gr sierra BTHP velocity: 2452 fps ES: 43 SD: 12 Great accuracy out of my rifle. I believe there's a little room of more...

Re: 18" SPR 6.5 Grendel Build Complete w/ Load DATA** <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TallZXDriver</div><div class="ubbcode-body">The more I read this the more I want to do my next build in 6.5. Does it require a special upper or is it just a...

Re: My review of the JP 6.5 Grendel a 6.5 jag...of course. Or .264 in inches. From what I hear the Wolf Gold is OK if you get the 120 gr MPT. Dont expect sub MOA. The 123 gr stuff sucks hind tit. 2+ MOA.

Re: 18" SPR 6.5 Grendel Build Complete w/ Load DATA** Sorry, I lost this thread for a while. I wasn't aware of all the problems with the BHW barrels. I got mine from SA&A. Price was right (way under retail). I got a barrel that was produced during the transition from the 7.62x39 bolts to the...

Re: New 6.5 Grendel Build Complete. (PIC HEAVY) Thanks for all the data. I have an 18" BHW barrel en route.:)

Re: Rainer Arms Select Barrels I dont own one, but the only thing I hear about Ranier's products are positive. I dont thing they'd peddle sub par stuff under their own name brand. JM.02

Re: Thoughts on a mill.. Clausing 8520 The 8520 can be setup to use larger mills. I have an MT2-ER40 adapter. It's not something you'd use for heavy cuts, but if used gently it will work. It can be done.

Re: Thoughts on a mill.. Clausing 8520 A Millrite/Powermatic or a Rockwell 21-100 are also two options. Theyre slightly larger than the Clausing 8520 but still a "manageable" size. They both are available with R8 quills IIRC. I also considered some of the square column chinese jobs.(RF-45...

Re: Thoughts on a mill.. Clausing 8520 Let me start by saying I'm not a machinist. I messed with the Bridgeport at work a little, that's about the limit of my knowledge. I have an 8520. The MT2 spindle will limit your tool choices quite a bit. Other than that it's a good solid mill. Clausing...