Recent content by DellaDog

Daystate can definitely push them. Medium power goes supersonic with 16 gr pellets. 25 gr. stay subsonic on medium. 50+ fpe (The “crack” is not backyard friendly)

Yeah, I know “air rifles.” Three different rifles, 5 different pellet sizes, and over 100 shots fired - not a single missed recording. Impossible with the LR.

I'll take the Med Palma. Thanks

You’ll go through several rebuilds, tear downs and replacements of all cheap compressors before you eventually end up with an Alkin W31 or give up. I had two tanks and eventually dropped the $$ on an Alkin - I wish I had done it a long time ago, it’s that nice. 2500 to 4500 psi in 7 minutes...

I dunno about Peterson = junk. I have 20 firings on the same Peterson 6.5 brass loaded at 41.5 gr 4350 through 3 barrels. I have not lost a single piece to pressure or loose pockets.

Concur. Absolutely the best zero system I've used. I've been very happy with the G3.

22 LR, 6 BR (Dasher,BRA etc.)

Alamo Precision, North Richland Hills Ask for Robert.

Before someone told me I should use the Federal magnum primers, I used the non-magnums with RL26 and 230 Hybrids. I noticed no difference.

Thinking I’d find *the* ideal loads for each caliber I shoot, I’ve spent a lot of time playing the OCW game. Turns out they all led to common loads (over several barrels within a tenth or two grain difference): 223 : 77 - 80 SMK, 24.0 Varget 6 BRA : 105 Hybrid, 30.5 H4895 (add a grain for...

It’s equally likely it’s because of responses like yours.

+1 for the Daystate Revere.

I’ll take the 80 SMKs if still available

Agreed. Better still, purchase your reamer.

I don’t really know as I shoot bench on bipod. When carrying it’s comfortable just forward of the magazine. 22” ace barrel.