• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Recent content by goosendmax

  1. G

    Twist Rate - 300 Norma

    The only load data I have been able to find for 300 NM is from Sierra. Are there any other sources you know of and/or can suggest?
  2. G

    Twist Rate - 300 Norma

    What powder are you using?
  3. G

    Twist Rate - 300 Norma

    For those of you that have experience with a 300 Norma Magnum what twist rates are you running and what bullets? I’m really wanting to use the 245 Berger’s or the 250 A-Tips. Barrel length will be somewhere around 27-28” finished and was thinking of a...
    • Thread
  4. G

    Twist Rate - 300 Norma

    lowlight, Thank you for the much needed information. Here’s the problem I’m running into. I have everything I need right now to build this rifle, and the option between two barrels. One is a 1:8.5” twist and the other is a 1:10” twist. I originally was only going to run Berger 230’s but have...
  5. G

    Twist Rate - 300 Norma

    Frank, Thank you for the detailed reply. Exactly what is was looking for.
  6. G

    Twist Rate - 300 Norma

    For those of you that have experience with a 300 Norma Magnum what twist rates are you running and what bullets? I’m really wanting to use the 245 Berger’s or the 250 A-Tips. Barrel length will be somewhere around 27-28” finished and was thinking of a twist rate of 1-7.5” to 1-8.5”. Berger’s...
  7. G

    Powder for 6.5PRC?

    I would love to get some N565! Unfortunately everywhere I check has the same result. “Out of stock”
  8. G

    300 Norma Magnum

    Found some good load data from Vihtavuori’s website for 300 Norma Magnum but obviously can’t find any N565 or N570 powder due to ammogeddon. I have plenty of H1000 and IMR 7977 but can’t find any “reliable” load data. Anyone have any good start loads for these powders? Or have any reliable...
  9. G

    .30-06 load data??

    Due to Ammogeddon 2020 this is what I have available. IMR 4451, CCI large rifle primers, and Barnes 168 grain TTSX bullets. I have not been able to find any published load data for this bullet/powder combination. I am fairly new to reloading so I’m not completely willing to follow my research...
  10. G

    300 Norma

    Email sent. Thank you for your help.
  11. G

    300 Norma

    Can you please send me info on the Mk2? I can’t find it on your website and if it’s anything like the Mk1 I would be interested.
  12. G

    300 Norma

    You’re right and I should have researched more before commenting. I actually need a LA CIP bottom metal that accepts the .338 Lapua magazines. This is all new territory for me so I am trying to learn as fast as I can, order parts that are sold out as fast as I can, to wait as long as it takes...
  13. G

    300 Norma

    Just curious what your twist rate is in your barrel. I have the option of a 1 in 10” or a 1 in 8.5”. I’m leaning towards the 8.5” for the 230 grain bullets.
  14. G

    300 Norma

    Thanks for the information. I was looking at a Manners stock and a Surgeon XL bottom metal with an AI .338 magazine. But I didn’t know if this combo would work as I have never shot or built anything larger than a 300 WM. Sounds like it should run just fine though and I am sure Chad and the crew...
  15. G

    300 Norma

    Thinking about building a 300 Norma. Was just curious if anyone else has had one custom built and what bottom metal and magazines work best. I currently have a Mausingfield that I was going to re-barrel so the magazines would need to be center feed. Any help or experience would be appreciated...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts