Recent content by LH

Thank you for the response. That's bad news. I doubt I'm the only one with this issue. Hopefully there are plenty of others who want to see the Horus reticles in this app. I shoot the H59 exclusively for long range after investing in an S&B 3-20 with H59 that I use on 3 different rifles. If my...

Just got the iPhone version. Looking for the H59 reticle. Is it not available in the iPhone version, or am I missing something? Thanks.

Re: Mk 855, Mk 262 & Mk 318 BC's & velocities? MK262 chrono'd with a CED M2 out of my recce (16" Noveske barrel) hovers around 2650 to 2700 fps.

Re: stock packs on A5's..Do they work with the hook??? I've used an Eagle stock pack on a McMillan A5 for a few years. Yes, you can secure the straps without issues.

Re: Load matching Acog Reticle Seems to be the problem with BDC knobs and reticles, they are bullet and barrel length (velocity) specific and rarely match up with what ammo or rifle you're shooting. Just a suggestion: Pick a bullet. Use a ballistics program to play with velocities for that...

Re: What Combat/Drop Leg holster is your favorite? I ran a 6004 (high on the leg with only the bottom strap in use) in drop leg configuration for a couple years. About 2 years ago I switched to a 6365 with UBL belt attachment (ALS w/ SLS hood for Glock 19 w/ X300) and never looked back...

Re: Loads for .223- 5.56 Out of a 16' RECCE (Noveske polygonal rifled barrel) Chronographed 10' from muzzle with a CED M2. Avg FPS per 5 shots: MK262 mod1 (in box).......2732 fps MK262 (on stripper clips)...2665 fps 24.4gr TAC, LC case, Wolf SR mag primer, 77gr SMK...2698 fps (no pressure...

Re: cloning MK262 ammo Forgot to add 1:8 twist.

Re: cloning MK262 ammo Out of a 16' RECCE (Noveske polygonal rifled barrel) Chronographed 10' from muzzle with a CED M2. Avg FPS per 5 shots: MK262 mod1 (in box).......2732 fps MK262 (on stripper clips)...2665 fps 24.4gr TAC, LC case, Wolf primer, 77gr SMK...2698 fps (no pressure signs)...

Re: TAC in .308? Yes.......5 rounds. My starting load of 40.5gr of TAC was about 1". As I push it faster I hope the groups don't open up too much.

Re: Trailer: The Men Who Stare at Goats Saw the movie last weekend. There was little historical value (based on actual events). It even failed at being a good comedy, just not very funny. It took some swipes at the war and the Bush Admin. (I was trying to enjoy it until that point, then just...

Re: My new .308 build. I have a Crusader, they're a bit hefty compared to a Rem PSS. Good stocks and barrels ain't exactly light. You are lucky to be able to use that as a work gun.....very lucky. My agency insists on wasting A LOT of money on the M24 package, which comes with a fixed 10x...

Re: My new .308 build. NIce rifle. Is this the work gun you were trying to decide which scope to mount on?

Re: TAC in .308? First attempt with TAC in .308 (first attempt at loading 308 at all) LOAD: Federal case trimmed with Giraud trimmer to 2.06 CCI 200 primer COAL 2.89 / OAL to ogive 3.162 41.0 gr TAC Sierra 175 gr SMK Loaded on Dillon 550 Avg vel (5rounds) 2457 ES 85.0 SD 28.8 RIFLE: GA...

Re: TAC in .308? Curious about answers on this as well. Just loaded up my first 10 175gr SMK's behind 40.5 and 41.0 grains of TAC to begin load development, but haven't made it to the range yet. I've been using TAC with very good results in .223 with LC 55gr FMJBT's and Sierra 77gr SMK's...