Recent content by mocos

Re: Buying Ammo?? if you buy from ammoman and pay by check....you get a 3% discount on the listed price.....last batch was a one day sale and I ordered and sent an email saying I would be paying by check and they honored it.....

Re: point of impact changes with heat...help!! thanx..got it...start with a 0 hold and when things start going bad..(in my case)adjust to a 7:00 hold...or use the top right corner of the front sight and a skosh lower etc...and if I read between the lines, once the barrel has heated up enough...

I have two socom 16s one GI tiger striped wood stocked the other synthetic..they both operate very well with an occasional feeding and ejection hiccup every so often. I shoot both of them in 3 gun and run-n-gun matches. As a result they can get pretty hot to the touch because of the number of...

Re: .308 Battle Rifle <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Greg Langelius *</div><div class="ubbcode-body"> The rifle is glassbedded and has hooded ring front, N/M rear peep match sights, along with a 1" LOP rubber extension butt pad. Accuracy...

Re: Is this a proper way to develop a load? agreed on the cleaning part...I said sub moa all day....not 1/2 moa...anyway it was a figure of speech... are you saying that the frequency of firing each round should be separated from "load development"?...I think it should be part of it as in the...

Re: Is this a proper way to develop a load? just finished reading Newberry's article on "optimal charge weight" and it brought to mind a couple of questions: 1. Newberry suggests "cleaning the barrel midway through the load develoment process" which is subjective depending on how many rounds...

Re: M1A Possible Sear Slipping <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pdt1793db</div><div class="ubbcode-body">How do I quit riding the trigger in recoil is this where right after the shot breaks let the trigger go completely instead of keeping it...

Re: When did Eagle move to PuertoRico? I believe ATK also operates Lake City... somewhere in another post there was mention that they were attempting to buy once fired brass directly from military bases as opposed to from a centralized disposal site. The incentive for the bases to do this...

Re: Objective research on Barrel Break-in procedures very interesting.... I checked Sentry Solutions's availability and it appears that bp2000 and smoothcote is on the governments restricted mailing list..meaning it it incurs a shipping fee not unlike a "hazmat" charge ($30-$50)...? Where...

Re: Cupronickel, that is not a typo. the bore "looks' clean...I wouldn't know what nickel fouling would look like...short of using jb abrasive...I used hoppe's, an ammoniated cleaner and bore tech...nylon brush etc ...and the patches came out clean....so?? what chemical would turn nickel...

Re: Cupronickel, that is not a typo. I recently bought a case of the ammo...dynamit noble....googled cupronickel and came up with essentially: ...as some of the previous posts to its origin and use was already iterated yada yada....my interest was regarding the "lumpy" stuff.. It appears that...

Re: Flush cup Placement and adjustable length of p <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shootone</div><div class="ubbcode-body">i would get adj lop and adj cheek piece if it where me, that way you can fine tune the stock and get it fitting you perfect...

Re: cleaning after shooting cupro-nickel bullets I try not to use a bore brush and if I do, it's a nylon one. This bore tech brand seems to be very effective in removing copper fouling without having to use a brush. I verified it by using a "foul out" after cleaning my AR with boretech and...

Re: cleaning after shooting cupro-nickel bullets don in sc the galvanic response you mentioned ...was the final result essentially "rust"?.....and would that apply to a stainless barrel to some degree?

Re: cleaning after shooting cupro-nickel bullets that's exactly the "problem"...the articles I managed to scrounge up indicated that the copper was removed but left the nickel behind? I am guessing that the copper solvent dissolves the copper but not the nickel and subsequently the nickel is...