Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
What brand was the markers you talked about in your podcast that you are marking brass with now? I remember you mentioned that it didn’t come off as easy when tumbled. Thanks, Dave
I had a similar setup when doing powder coating. The powder coat would have fisheyes and the cause was contaminated media slightly embedded in the metal or contaminated air blasting on the surface. It was a pain to resolve because the air line, all the media and inside the cabinet was...
What type of air filtration do you have on your blast and spray setup? Oil and water contamination from the compressor can be hard and expensive to get rid of.
My first custom gun was a 308 and had a similar issue. I was told by the smith that the reamer was worn a little and made the freebore very short. Only cheap surplus ammo would chamber so I sent it back and they fixed it. Shoots excellent now.
I have 2 vudoos and my buddy has a vudoo and a b14. B14 doesn’t give up much if any in the accuracy department. Custom rig you get the stock chassis you want but the b14 shoots very well and if it doesn’t then get an IBI or shilen and you’ll be set. But your not saving a lot if you plan on...
Chassis is in great shape and will come with all the accessories in the pic, low profile anarchy cheek piece and RRS arca adapter. $1,400.00 Thanks for looking, Dave