Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I've actually figured out what was wrong...... me! Well me and my shitty bench. My bench top isn't the best and it flexes very easily, so when I would push too hard at the bottom of the cam the bench would flex more and add a .0005 to .001. I figured out that by having a more consistent pull of...
So I've refrained from posting my rifle since it basically looks like pretty much half of the rifles on this thread, but sine everyone like scenic pics here you go! Rem 700 SPS-V 26" AICS 2.0 Viper PST 6x24 FFP Timney 2# trigger Scope rings are higher than I'd like, and I really want to...
Have you shot it with the break on yet? ....does it work well enough to see impacts at short distances? Looking for a good brake that's the same diameter as the barrel of my SPS-V, most I've found are slightly larger.
I love my SPS-V! I shot a few sub (barely) .5 MOA groups with rifle in bone stock setup. When I dropped it into an AICS 2.0 and added a 2# Timney trigger the best groups I've gotten out of it were .077 MOA and .178 MOA at an indoor 100 yard range! I was shocked, even though they were only 3...
This is great info thanks! The cases were brand new Lapua and this was only the 2nd time I've sized them so I'm sure the brass is still pretty tough. I'm sure I'll be anealing them in the short future. I always lube the necks really good using One Shot and spaying right down the necks, but maybe...
Sorry I don't understand your comment, could you please clarify? So first part: I'm overworking the brass. - Why would I use the longest measurement to size if there are cases shorter? All the cases were from 1.624-1.626 ...so by using 1.626 I would literally be doing nothing. The ones that...
Not sure if I understand this..... I raise the ram all the way and then screw the die until it hits the ram, then back off the die a tiny bit and start screwing it down a little more every time until I start bumping the shoulder. So you're saying that I need to put pressure on the die somewhere...
Hi, So I have the Redding FL/NK sizing die (the NON-bushing one) and I've been having issues with it ever since I got it and would love to know if it's something I'm doing, normal, or something is jacked up! I have a lot of 50 fire formed brass that I shot last week. Dadum measures 1.624 -...
A ton of great responses here! I can tell you I wanted to be sniper since before I could remember, actually I an remember... after I watched the movie sniper, lol! I graduated from High School early just to go to the Marines, but I wouldn't be 18 for almost a year and my parents wouldn't sign...
I just went through the same exact thing! It's SOO confusing when you don't understand the process! But I was lucky enough to find a local mentor that took me under his wing and it's crazy how much I've learned over the last few weeks! Trust me, once you start actually loading all these little...
I just started my load development with these today. I'm using brand new Lapua brass and Varget and I took them all the way to 45.3 (all .030 off the lands which is 2.205 Ogive length for my rifle) with absolutely no pressure signs. That's interesting that Berger lists a max load of 43gr because...
Where does the RCBS 505 scale fit into this mess? I'm a new reloader and it came with my kit along with the uniflow powder measure. I've looked in the for sale sections and it looks like I could get close to $150 for the scale and powder measure since they're unused, which would get me half way...
Took a screen shot of this and sent it to my GF!! She'll die when she see's this, I'm way too OCD and she watches some hoarding show and thinks I'm the perfect candidate, lol! ....coincidentally in the last 2 days I've purchased 10lbs or powder ant over 1k in bullets! 500ea of 178 A-Max and 175...