Recent content by SteelW0LF

I have a Choate stock and liked it. Like others have said its not light, but felt very sturdy. It was a good stock to use while you are doing other modifications to the rifle so you can afford more ammo. My one dislike on it (and only having one dislike on such a cheap stock is a huge plus in...

Yeah, I'm not sure where this idea that torque is applied when the bullet leaves the barrel came from, but due to the laws of physics they are claiming to quote that is impossible. Torque is applied to the barrel when you take a non rotating bullet, and force it to start rotating with the...

I think I've heard of some folks putting some epoxy down in the honeycomb webs and stuff to stiffen the stock up.... just don't "bed" your action that way...

Solution: Henry Bowman

When you mentioned the "Midway Method", I thought you were referring to polishing compound on the head of a wood screw.... that's in another video, and I'ld be reluctant to do that to a 22.

Re: Removing engraving/type? Maybe I'll have to find some form of scrap that hace engraving on it to practice on befor I go at the nice gun.

I would like to remove the stupid "please read our instruction manual befor using a firearm" from the barrel of my otherwise beautiful GP-100 Revolver. Is there a way of doing it decently well? I could have access to a full machine shop for this, but hand/power tools are easier and at my house.

Re: Need some advice on a build gone wrong There's another thread floating around on it. "Superior Tactical Solutions" is the company. If you google them, there is a history of this sort of unacceptable behavior.

Re: Need some advice on a build gone wrong Looks like there is a history of pulling this same crap. Holding peoples rifles hostage when his buisness screws up the order. http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3815785&#Post3815785

Re: Anybody know about Superior Tactical Solutions???? Dejavu. Someone needs to close this guys shop down for good. It now appears this guy has a history of this behavior. http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3815800&#Post3815800

Re: R700 .308 oppinions? Maybe I stumbled into success then. Varget is the powder I stockpile, and 175gr SMKs. Sounds like I should be on the right track.

Re: R700 .308 oppinions? Soon after I recover from buying the suppressor. I want to look into getting another 700 action. I still have the stock I had befor the AICS. So if I can find a donor action I'll basically have 2 rifles. For the purposes I'm leaning twords. Sounds like I'll put...

Re: R700 .308 oppinions? Thanks for the replies so far. These are the considerations I'ld been mulling over in my head.

I have a R700 .308 with two different barrels. I know many of the pros and cons of the barrels lengths, but would like to here your pros and cons on my setup and while barrel you would go with. I have a R700, in an AICS 2.0 chassis, with a SWFA SS 10x scope, Badger 20MOA scope Base and rings...

I know why the run on guns and ammo for the last week or so.......but: Does anyone have any info on the bulk 62gr steel core 5.56 Ammo? Designated XM855. It's been "sold out, no back order" for many months. Tried googling, but didn't get anything recent on why it would be a shortage.