Recent content by viersco

Re: 375 CheyTac, 350 grain Sierra... Mr. Huskey, Is this the barrel i put on? Those numbers you posted seem about right for the speed, bullet type and elevation in the 375 cheytac. I would say the Cutting edge bullet will be better vs the cheytac solids. Another one to test is the Rocky...

Re: Cheytac projos....solids or jackets? I think Midway has some of the CE bullets on the closeout list.

Re: 338 SnipeTac You guys pretty much covered the Snipetac, Hot rod long range rifle. 3300fps is the average speed most are shooting with 300gn bullets. Highly accurate! Barrel twists, 9 up to 10. I use a variety of barrels, Benchmark 9.3 9.5 and 10 twist. Lilja 10 twist. Kreiger 10...

Re: 30 BTAC I built the 30BTAC for a special P dog hunt with a pistol. Our goal was shots in excess of 2000 yards, new record with a pistol. The weather was not good and only had two days to achieve the feat. We never had a confirmed kill, several possible hits but could not find evidence...

Re: new 375 CheyTac first rounds down the barrel How are the dies working? Dave

Re: 375 Viersco Mag <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ch'e</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rocky Mountain</div><div class="ubbcode-body">I wonder what the barrel life will be...

Re: 375 Viersco Mag When i went to the 40 deg shoulder the whole project came together rather fast. what was lacking with the 30 deg shoulder has improved vastly. US869 is a great powder in warmer temps or use a hot box. BMG50 is outstanding, no issues at all. The burn rate is very...

Re: Black Diamond Upd, 375 VM2, Barker Machine Works I have been busy with so many custom rifles and dies that the 375 VM project got side tracked. We had a major flood last summer that stopped all progress here. I have tested several different barrels and twist configurations. I changed...

Re: 375 Viersco Mag <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Later</div><div class="ubbcode-body">Dave, I am OCONUS so I would say just attn it to Larry Thanks </div></div> I hope its treatable!

Re: 375 Viersco Mag Later, I will get one shipped out tomorrow. Bolt face .685 Send it to your attention? Ron at Bench Mark Barrels is making 8 twist barrels, 6 groove. Up to 40" long. .367 bore Dave

Re: 375 Viersco Mag <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jimmy M40a2</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Now that i have the brass fired and tested i will get one...

Re: 375 Viersco Mag By the looks of the fluting i would say so. I didnt build those rifles. Dave

Re: 375 Viersco Mag Later, Sorry i missed your question. I really didnt want to use BMG primers as they are inconsistant and hard to get at times. The only issue i had was with US 869 and extreme cold temps. I just started a new round of tests with V V 20n29 powder. I shot in temps right...

Re: GS Custom Solids for 375 Cheytac Gerard, When i asked Barney Lawton about the Lost River Bore he said it was a 367 that they lapped oversized. I talked with Ron at Benchmark barrels the other day and he said the ones they sent him to be rifled had 368 bores, 375 rifling. Hope this...

Re: 375 cheytac loads? start with 132 of Retumbo dave