Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
You might want to call and see if he has either a shouldered or prefit already spun up and chambered in the contour and caliber you're looking for. I bought a shouldered barrel form him last year that was supposed to take and month and took almost 6. It shoots and ultimately he made it right but...
If you're going to get the new PTG bolt with the smaller firing pin hole wait to true up the bolt lugs. If you're doing it at home the easiest way is to remove the bolt and char the back of each lug black with a lighter or candle. Then reinsert and close the bolt and remove it again. Wherever...
Doing both sides separately probably caused even less of a chance of any distortion. As mentioned above, the point of bedding the rail is to match fit the manufacturing inconsistencies and tolerances of the rail to the manufacturing inconsistencies and tolerances of the action without inducing...
Padom, there was a short video of you on youtube prepping brass in a 650 with a Dillon power trimmer. I've heard that due to the cutter and speed you don't have to chamfer/debur. But most people aren't making ammo like you're talking about above. Do you still use the power Trimmer?
After having all three for a couple months which has the most recoil reduction and in the event the answer is different than the first, which is the best/ easiest to spot your own rounds?