X - Vectronix Shooting Solutions

#851
CSTactical said:
We have a limited number of enhancers coming in very soon anyone interested than please PM me your full name, billing address, email and phone number. And those on the list I'm calling now :)

-Richard
916-628-3490
Click to expand...



And if you or someone else is looking for a 12X DMR to go with an enhancer you can also PM or call me at 916-628-3490 - Richard

*This is while supplies last and before any tariff or price change goes into effect.
 
#858
Working great so far.

Thanks @CSTactical for the prompt shipping

1000083684.jpg
 
  • Like
  • Love
Reactions: AK74U, BigJimFish, lonestar1845 and 2 others
#862
PhrogDriver said:
Are those the same Tenebraex lens covers that screw into the binoculars?
Click to expand...
Those are the ones provided in the original box. I do notice that they have less tendency to come off compared to putting them on the binos only.

The tenebraex, unfortunately, don't fit on the enhancers despite being threaded. 🤷🏾‍♂️🤷🏾‍♂️
 
#864
PhrogDriver said:
Dang! Thanks for clarifying that...You would think they would fit...
Click to expand...
It appears, at least when I was messing with it, the rubber lip around the enhancers reduces the inner diameter a bit. So when attempting to screw the tenebraex caps, it is larger than rubber lip. I'm sure with enough force it MAY work, but I'm also not risking slipping and damaging the objective of the enhancer. 😂
 
#870
Last edited:
  • Like
Reactions: NiteQwill and Ichi
#871
NiteQwill said:
I don't know if I would trust an arca mount via the enhancers. The thin threading and engagement
Click to expand...
Ahh, just come clarification, we are not making an ARCA adapter that is attached to the enhancers, due to... thin thread engagement.

The product we are marketing to attach the binos to a tripod are the actual binocular caps w/ ARCA attachment, not enhancer caps. The caps have a solid hold on the binos. I have been using these since around February, essentially every weekend at matches, and I'm not worried about the caps coming off the Vector's.

The question a customer approached me with yesterday is if the enhancers will attach without taking our caps completely off. That is what I'm looking into tonight when I get a minute.

1761062431102.png
1761062449123.png
 
  • Like
Reactions: Ichi and NiteQwill
#874
Lil' Tone said:
Ahh, just come clarification, we are not making an ARCA adapter that is attached to the enhancers, due to... thin thread engagement.

The product we are marketing to attach the binos to a tripod are the actual binocular caps w/ ARCA attachment, not enhancer caps. The caps have a solid hold on the binos. I have been using these since around February, essentially every weekend at matches, and I'm not worried about the caps coming off the Vector's.

The question a customer approached me with yesterday is if the enhancers will attach without taking our caps completely off. That is what I'm looking into tonight when I get a minute.

View attachment 8791610View attachment 8791611
Click to expand...
Thanks for the clarification. I'm gonna order the solo caps for the enhancers you mentioned above 👍🏾👍🏾
 
  • Love
Reactions: Lil' Tone
#878
I haven't had a chance to test mine beyond my driveway, but the rangefinder is working fine with the extenders on and its working through/past foliage without issue.

Also got my set from @CSTactical (where I got the 10x42 originally last year).
 

Attachments

  • Ocab-20251018-191805-1200.jpg
    Ocab-20251018-191805-1200.jpg
    570.5 KB · Views: 18
  • Ocab-20251019-105351-1200.jpg
    Ocab-20251019-105351-1200.jpg
    1.4 MB · Views: 18
  • Like
  • Love
Reactions: Lil' Tone, AK74U and CSTactical
#880
Welp, No dice on our existing Vector-X caps being compatible with the Range Enhancers. They just barely interfere. Working on a Version 2 of the caps now so you will not need to remove them when using the Enhancers.

Also coming up pretty soon, Capped ARDs for the Vector's that aren't going to cost $400. Played with the prototypes yesterday at 570 yards with good success. Need to take them out further
 
  • Like
Reactions: lonestar1845
#881
Lil' Tone said:
Welp, No dice on our existing Vector-X caps being compatible with the Range Enhancers. They just barely interfere. Working on a Version 2 of the caps now so you will not need to remove them when using the Enhancers.

Also coming up pretty soon, Capped ARDs for the Vector's that aren't going to cost $400. Played with the prototypes yesterday at 570 yards with good success. Need to take them out further
Click to expand...

Could you do this? It might be excessive to some but I would pay for this.
 

Attachments

  • Untitled_page-0001.jpg
    Untitled_page-0001.jpg
    649.2 KB · Views: 16
  • Like
Reactions: NiteQwill
#882
taisenki said:
Could you do this? It might be excessive to some but I would pay for this.
Click to expand...
The problem you would have this this design is screwing in and removing the enhancers. The internal dimensions of the part that would clamp to the body of the binoculars won't allow you to slide the caps over the enhancers. And you can't simply screw the enhancers in, if the caps are already attached to the binoculars.

A three piece design would probably be better.

One piece would have the ARCA rail. Similar to the existing cap, but without the flip cap and hinge/portion. This piece would simply attach/clamp to the body of the Vector X as it does now and have an ARCA rail to clamp to. The inside dimensions of this piece would need to allow the enhancer to reach the threads on the body of the binoculars.

The other two pieces would be 2.185" objective caps for the enhancers. MKM already makes these. The only issue with this is that due to the location of the tensioning screw and flip cap hinge, the cap would flip up on one of the enhancers and flip down on the other.
 
#883
Ichi said:
The problem you would have this this design is screwing in and removing the enhancers. The internal dimensions of the part that would clamp to the body of the binoculars won't allow you to slide the caps over the enhancers. And you can't simply screw the enhancers in, if the caps are already attached to the binoculars.

A three piece design would probably be better.

One piece would have the ARCA rail. Similar to the existing cap, but without the flip cap and hinge/portion. This piece would simply attach/clamp to the body of the Vector X as it does now and have an ARCA rail to clamp to. The inside dimensions of this piece would need to allow the enhancer to reach the threads on the body of the binoculars.

The other two pieces would be 2.185" objective caps for the enhancers. MKM already makes these. The only issue with this is that due to the location of the tensioning screw and flip cap hinge, the cap would flip up on one of the enhancers and flip down on the other.
Click to expand...

Personally, I'm ok with not being able to screw the enhancers in/remove them while using this bino cover.

I plan on using my binos with the enhancers almost all the time.
 
You must log in or register to reply here.

Similar threads

DocUSMCRetired
AB Quantum 3.4.4 Vector X, Max Ord, Max Ord Range, Trace & Dialed Elevation Tool.
Replies
53
Views
2K
ought6
O
E
Vectronix Vector X - AB Quantum Target Card
Replies
2
Views
190
ecowboy
E
E
Vector X rangefinder mapping capability
Replies
3
Views
893
England
E
gr8fuldoug
New Revic Acura BR10 10x42
Replies
0
Views
244
gr8fuldoug
gr8fuldoug
S
Bear Creek Arsenal rangefinders and spotting scopes
Replies
19
Views
792
Mike Casselton
Mike Casselton
Top Bottom
Back
Home
Forums
Merch
Alerts