• Winner! Quick Shot Challenge: Caption This Sniper Fail Meme

    View thread

Search results

Search the forum Search Articles
  1. 2

    No pressure signs but

    Re: No pressure signs but Thanks, a hand model I will never be:(.I don't understand the question Mitch sorry.I'm very new to long range and reloading but been shooting all my life.I guess I'm a so called long range shooter in theory.Trying to figure all this stuff out before my next visit to...
  2. 2

    ladder test Rem sps 308 varget first reloads

    Re: ladder test Rem sps 308 varget first reloads Thanks
  3. 2

    Rifle Scopes Leupold 20 moa base

    Did Leupold discontinue there 20moa 1 pc Rem 700 sa bases?
  4. 2

    No pressure signs but

    I loaded to copy a FGM 175.175 smk 42.8 varget cci primers once fired FGM brass.I did the ladder test and found my load.I did post if I should go up more on the grains for higher fps but decided not too.I shot 20 the other day and they felt fine ,dead on.I went home and duplicated the load and I...
  5. 2

    Keep reloading same batch or go through all first

    Re: Keep reloading same batch or go through all first Difference in keeping track of them?Maybe one way might be easier.That's why Im asking ,I only have 20 rounds of rifle cartridge reloading under my belt.Just asking who does what and why.
  6. 2

    Keep reloading same batch or go through all first

    I have a bunch of fggm brass .Should I reload them all and then reload again and again or lets say take 100 and use them up till there no good and move on to another 100?
  7. 2

    ladder test Rem sps 308 varget first reloads

    Re: ladder test Rem sps 308 varget first reloads Thanks Ill try to duplicate the 42.8 and leave it.
  8. 2

    ladder test Rem sps 308 varget first reloads

    Re: ladder test Rem sps 308 varget first reloads It's a rem 700 sps 20" barrel Federal gold match brass cci primers.Long range to me is 1000 yrds.I'll be using in pa and az.I'm probaley dreaming with a 20" barrel.Might need a new gun:)
  9. 2

    ladder test Rem sps 308 varget first reloads

    Re: ladder test Rem sps 308 varget first reloads Sorry about that 175 smk
  10. 2

    ladder test Rem sps 308 varget first reloads

    I do not have a chrono(now I need one).Anyway I did a ladder test starting with 5 rds each 42 42.2 42.4 42.6 42.8 43 .It did best at 42.8 about nickel size five rounds 100 yrds.I'm guessing that the fps are pretty low.I'm looking for above 2550fps as stated on the hide anything lower won't work...
  11. 2

    Meplat trimming and oal

    Re: Meplat trimming and oal I don't really care .I'm just learning .Im guessing everybody has a ogive measurement tool?
  12. 2

    Meplat trimming and oal

    So heres my question and I hope I dont sound stupid.Does everybody that loads trim there meplat?I was bored so I pulled out the calipers and measured some 175smk length.They ranged from 1.231 to 1.241 .So if you dont trim your meplat before reloading your oal on every reload will vary?
  13. 2

    crimping a 308 175smk fed brass 210m

    Gonna try to copy a 175 fed gm first.I'm still debating with neck or full size.I was about to pull the trigger on dillon 3 set die set for 65.00.Now I'm reading you dont have to crimp at all?What would I do with the crimp die?The guy at the dillon dealer said if I get a case stuck its alot...
  14. 2

    550b primer tube

    Re: 550b primer tube I got it.Yes it was the primer mag.Wasnt in far enough.I dont know how it loosened up.Possible the primer mag nut wasn't tight and it got loose from vibration?
  15. 2

    550b primer tube

    Re: 550b primer tube Thank you for your quick response.I sent the tube in and twisted lightly until it seated correctly.I haven't changed nor adjusted anything.Have no clue what's going on.
  16. 2

    550b primer tube

    I have a problem with the primer feed.It got screwed up somehow.I was reloading 9mm and noticed they weren't priming.Took out primer tube and the plastic on the bottom was a little bent so I bent it back into place.When you drop primers in they fall right out of the bottom.I'm guessing I...
  17. 2

    Changing powder

    Re: Changing powder Any reason hornady 7th has 100gr and 124gr are listed with unique but not with 90gr 115gr or 147gr?New to this stuff.
  18. 2

    Changing powder

    Changed powder to unique from clays universal.Changed because store that sells clays is too far.They started me off with clays when reloader was set up.Anyway I used up the pound but ran it down to about 3/4 off an inch from the bottom and tossed it.My question is how many turns to go from 5gr...
  19. 2

    .45 primers small and large

    I started reloading and with that collecting once fired brass people don't want ,wether cashing in or reloading it.Kimberly .45 is my next gun so I swept it all up today at the range.Around 500 spent shells I collected.I noticed some large primers and some small.What size are the small and what...
  20. 2

    .308 die

    I'm looking for a set of .308 dies.I just bought a dillon 550 set up in 9mm.I originally bought it for .308 but decided to get in 9mm because someone recommended doing 9mm because they said it's easier to do and it would get me started and I needed it anyway.So I'm pumping out 9mm .My question...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts