Search results

Search the forum Search Articles
  1. W

    Help interpeting OCW .260 remington.

    Its h4831sc I think ill assume 46.4-46.5 is scatter node. so ill try either 45.7-45.8 for lower node and 47.0-47.1 for higher node
  2. W

    Help interpeting OCW .260 remington.

    Ya im guessing this rifle may have really small nodes. kinda wierd though if a scatter node is 45.5, and the +/- rule hold that puts the nodes at 44.8-44.9 for minus node or 46.1 for plus node. both of which have good groups if i had a flyer on 44.9 or If 46.4 is the scatter node then minus...
  3. W

    Help interpeting OCW .260 remington.

    46.4 seems to be a scatter node, i remeber reading somewhere that a certin % below a scatter node can be a optimal node but cant seem to find that info. I have a tikka t3 scout .308 that has a good node about every .5 grains (its a awosme gun) so even if the poi are differant there still may be...
  4. W

    Help interpeting OCW .260 remington.

    I do have a chrono and the next phase i will be using it, i was thinking of trying 4 loads to narrow it down. 44.9 just too see if flyer was a flyer, or if the is a good note there. 45.2 seam like it might be un the middle of #1 and #3 so will try that. 45.8 want to see if this is a node...
  5. W

    Help interpeting OCW .260 remington.

    Been having trouble finding a good load for my Savage 12lrp .260 remington, but think i may have found some nodes. All are three shots The top left and bottom left have 2 shots in the bottom hole, top left top shot may have been a flyer. Which loads do you all think i should set up next.
  6. W

    A4350 for .260 remington.

    43.2 a4350 to work pretty well in my rifle, with 140g amaxs, and 43.9 a4350 with 139g scenars. However i am getting flyers. I think it may be due to seating depth. Anyone with a Savage 12lrp .260 found what seating depth works best in thier's.
  7. W

    dpms sass whats your experience with it?

    I love mine, shoots bug hole most of the time, the other times im sure its me, shoot the 178g amax, 175g smk and 168g smk really well. Never had a single feed problem with it, or any other issue. But like elfster said ya wont know for sure till you buy one. Was banging 12" steel plate at 800...
  8. W

    savage model 12 LRP .260 rem

    I also bought this gun but it came with a defective stock so had to send stock back for new one. Should get it tuesday. i have only been able to find a4350, and h4831sc, have 140g amax, 139g scenars, and 140g berger hybrid. Looking for load info as well ive heard that seating depth can make a...
  9. W

    A4350 for .260 remington.

    Right now A4350 is all i can find. Ive got the hi and low load data for it ect . Just wondering if anyone has any personal experiance with it in a savage 12 lrp .260. Should i waste bullet trying to find a load with this powder ect?
  10. W

    A4350 for .260 remington.

    Just bought a savage 12LRP in 260 remington. Right now im working on getting supplies together to reload. Looking on the boards most everyone is using H4350, but i cant find any of this local. I did however find some accurate 4350. Anyone that can tell me how this powder compares to H4350...
  11. W

    Reforming .308 winchester brass to .260 question.

    From what i have read case lenght of 2.015 or better should not be a issue. Issues come with neck thinkness. After reforming brass i get a lenght from 2.018 to 2.020. Neck thickness is .290. After seating bullet i get .293 to .294. which gives me .004 to .003. Thanks for the info all. I...
  12. W

    Reforming .308 winchester brass to .260 question.

    Ill Check out the 2 links you put up flight. As it is right now the only brass i could find anywhere was winchester 308 brass, so this is what i have to work with.
  13. W

    Reforming .308 winchester brass to .260 question.

    Bought 100 .308 winchester brass to reform to .260 remington, for a new rifle i am getting. .308 brass case lenght is about 2.008. When i resize it with my .260 die i get about 2.015 to 2.020. Hornady case trim length shows 2.025, and max length of 2.035 Is this going to cause any problems...
  14. W

    Suggestions on Brass 300 win mag.

    looks like i can get some winchester power x ammo for about 25$ a box will buy 2 and use that brass to reload for now. Cheapest fed is about 40$ a box. thanks for the imput guys
  15. W

    Suggestions on Brass 300 win mag.

    Recently purchased and new rifle remington 700, 300 win mag 26" bull barrel. Ive to 220g smk, imr 7828 powder, 215m primers and die's. Im Just lacking brass, cant find any at local guns shops or online. Was thinking about buying some cheap ammo like winchester super x, cheap hornady ammo...
  16. W

    Flatten, and pierced primers

    Just a update, im still getting a little over pressure signs, about the only thing i can figure is Powder lot differnace, using 4064 i ran out of it in novemeber, i was unable to get more powder until just recently so i would have to be a new lot as all the other was bought up due to the mad...
  17. W

    7.62 FGMM Clone Load Question

    I went back and checked my notebook, checked 2 boxes and all where between 2.798 and 2.805, and they where the 308 box not the 7.62 x 51mm box(notes are about 2 years old). Info i found was that the 308 box is suppose to have higher standard for accuracy than the 7.62. I believe it was on this...
  18. W

    7.62 FGMM Clone Load Question

    Every FGMM i have tested all have a OAL of about 2.800, maybe play with your seating depth a little i know this can change PoI.
  19. W

    Flatten, and pierced primers

    Well i cleaned out the die and adjusted it somemore, was able to get the cases work good in my bolt gun. I have found that my tikka t3 scout and dpms lr308 sass have very similar chambers, and have found 4 loads that work awsome in both guns. I did find that the brass in the semi auto before...
  20. W

    Flatten, and pierced primers

    Cleaned Bolt, chamber/throat really well. Didnt fix the problem. I have noticed on my brass when i resize it, check it on my bolt gun the bolt has some resistance closing, checked some older reloads and the bolt closes smothly. I tried adjusting my die, but i still get some resistance closing...
Top Bottom
Back
Home
Forums
Merch
Alerts