• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. S

    moa at 1000yrds

    Re: moa at 1000yrds <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tripwire</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Aimsmall55</div><div class="ubbcode-body">10 inches roughly. </div></div>...
  2. S

    Lucky Dog. Two rifles, same load, great results!

    Re: Lucky Dog. Two rifles, same load, great results! Very nice groups. On a calm day those groups will get even smaller.
  3. S

    Need Help!!!!

    Re: Need Help!!!! Both will get the job done. The more expensive one just a hair better.
  4. S

    What's my initial setup cost for .308?

    Re: What's my initial setup cost for .308? About $500 will get you going.
  5. S

    Which 308 brass?

    Re: Which 308 brass? Hornady or Winchester are both gtg.
  6. S

    Reprogramming RCBS chargemaster- settings

    Re: Reprogramming RCBS chargemaster- settings great info.
  7. S

    Gunsmithing Rem 700 extractor replacement?

    Re: Rem 700 extractor replacement? Try this article. There are also some Youtube videos that might help. http://www.ehow.com/how_7591381_remove-700-extractor-rivet.html
  8. S

    Gunsmithing totalled the truck today. bummer!

    Re: totalled the truck today. bummer! Wow, just the visual image is awesome. Glad you made it out and are able to tell the story.
  9. S

    what is the best scale for the money?

    Re: what is the best scale for the money? Based upon the $ you paid for the press, the least expensive scale would be a Lee balance beam. Probably, could find one on Ebay.
  10. S

    .223 brass question

    Re: .223 brass question TAC is known for being on the dirty side. Try a different powder.
  11. S

    New Reloader shopping list.... Advice needed

    Re: New Reloader shopping list.... Advice needed Make sure you have something to remove the primer pocket crimp on all that 556 brass. Hornady makes a tool for about $10 that can be chucked into a drill.
  12. S

    Need a set of quality reloading dies.

    Re: Need a set of quality reloading dies. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Fuzzball</div><div class="ubbcode-body">Forster/Redding are as good as it gets in threaded dies. All others are tied for third place. But the difference on target isn't...
  13. S

    223 Powder

    Re: 223 Powder Can not go wrong with Varget. Winchester 748 is also a great 223 powder.
  14. S

    Anneal primed brass???

    Re: Anneal primed brass??? Really, 2-3 cents for primers? Total $2-$3. Toss the primers.
  15. S

    Photos 260 Remington (Patriot Arms / APA)

    Re: 260 Remington (Patriot Arms / APA) Excellent shooting. Feel free to show some pictures of the rifle.
  16. S

    Tightening Primer Pockets?

    Re: Tightening Primer Pockets? I have never heard of any process/tool that will tighten up a loose primer pocket.
  17. S

    Measurement to ogive --- need confirmation

    Re: Measurement to ogive --- need confirmation When you taking the measurements be very careful. Sometimes you will get different readings with the same bullet.
  18. S

    Gunsmithing Remington Barrels

    Re: Remington Barrels Here is some info. The twist rate on a 5R is 1-11.25. http://www.snipercountrypx.com/pc-499-83...pe-rifling.aspx
  19. S

    Humidity Control for Safe?

    Re: Humidity Control for Safe? I use these from Amazon. 3 years and no issues with rust. http://www.amazon.com/Eva-dry-EDV--Renew...5656&sr=8-5
  20. S

    Interesting question from a walmart clerk

    Re: Interesting question from a walmart clerk Going to Wally World is always an adventure in the unknown.
Top Bottom
Back
Home
Forums
Merch
Alerts