Search results

Search the forum Search Articles
  1. E

    Nightforce ATACR question

    I am running a NF ATAC-R and an NXS and have not seen this issue with either and I am like most here and use the scope alot.
  2. E

    Muzzle brake affecting shooting position?

    As Sterling said shoot a .260 or 6.5 Creedmore and you will be much better off. I can use my .260 drop data for my .300 to some extent. I have out to 850. My first round hits were close enough to not worry with it much. The recoil of a 260 or 6.5 Creed is very little w/o a brake, so with a...
  3. E

    Rifle for a young marine

    P/M sent with some info.
  4. E

    Can anyone provide me some reloading data for 260 Remington over the next hour?

    I ended up shooting IMR4350 behind 123 SMK's or preferably 123 Scenars. Very good velocitis and accuracy. I have been experimenting with Hodgdon SuperF and it is showing to be a very good powder as well. My rifle just does not like the 140 class bullets. They shoot ok, but not outstanding. The...
  5. E

    Federal 300 WM brass, 5 loadings, good or bad...

    I just discarded some (200) WW brass for a 300 WM that I had ten firings on. Not all of it was bad, primer pocktes were getting loose. I try to keep everything at the same number of firings and anneal every three firings, so when some went south I canned it all and started over. It took two...
  6. E

    Adventures with H100V in .260 Remington Improved

    I run the H100V in my straight .260 and my .300WM. I have not had temp. problems and I run the load .3 off max at 90-95 degrees down to 20 plus. I have had very little issue with it. It is a high intensity powder, so you may want to watch for fire cracking if you run hot loads. My 123 AMAX's are...
  7. E

    Help extractor is cutting rim

    +1 with former naval person. Send it back to GAP.
  8. E

    removing tar from pulled bullets

    Goof Off will remove it. It is a bit strong, but it will come off.
  9. E

    IMR 4350 vs. H 4350

    I'm using IMR 4350 with 190's and it is a hammer for me. I also shoot it in my .260 with great results.
  10. E

    H4350 4 sale

    Midway has 8 pdrs in. Just notified me.
  11. E

    List of Shooting Ranges over 500 yards

    Bradford Sportsmans Farm Starke, FL. Not far from the State Prison. Open to the public Wed, Sat, Sun.Two rifle ranges one is 100-300 the L/R is out to 850. You MUST qualify to shoot the 850. Call to set appointment to qualify. Contact is Rick.
  12. E

    New brass chambers fine, need to FL size?

    I only neck size my new Lapua brass. Never had a problem. Running a .260 Remmy. Mike
  13. E

    Recommend quality seating die

    Whidden! They seem to be the most accurate and consitent I have used.
  14. E

    IMR 4350 vs. H 4350

    I shoot IMR4350 with 190's in my 300. It shoots better than anything I have tried execept H100V. Velocities are about the same with the H100V a bit more accurate, but both do well out to 1000.
  15. E

    Range Report Nosler Custom Competition for Hunting

    I have a buddy that shoots the Nosler CC 168 to hunt with. It has done the job on everything he has shot, but little exits and little blood. However, I shoot the AMAX and there is no comparison. Tennis ball exits or DRT's.
  16. E

    .260 Match Ammo

    Do any of you gent's know where I can buy some Black Hills 260 match ammo with 139 scenars or Federal GMM with 142 SMK's? I know I can build my own etc.., but need it for other purposes. Thanks in advance for the help.
  17. E

    260 Loads Only

    Well I made it to the range to do some work with the SF powder. Thank you Southpaw for starting the testing and thread. Anyway, the chrono was being a pain, so I only shot one load. Rifle: Remington 700 .260 McGowen barrel, 1:8 twist, 26" 48.3 SF Lapua virgin brass BR2, 123 Scenar...
  18. E

    Hodgdon Superformance Powder

    http://www.snipershide.com/shooting/snipers-hide-reloading-depot/22271-260-loads-only-post2587677.html?highlight=Superformance#post2587677 The SuperFormance info is here.
  19. E

    Hodgdon Superformance Powder

    I read Southpaws thread a week ago and was intrigued. I have an 8# keg of SF so off I went. I ran the same testes he did, but with Lapua brass, which is thicker. The rifle is a .260. Initial testing shows great promise. I was going to run a full velocity test this week and add to Southpaws post...
  20. E

    Range Report Truing Ballistics question....

    wnroscoe is right on here. You will also need to true the elevation turret to the program. That is at the mid-ranges roscoe is referring to. I have observed data changes as the weather changed while I was actively shooting. The 4500nv is better for this as it updates as the changes occur.
Top Bottom
Back
Home
Forums
Merch
Alerts