Search results

Search the forum Search Articles
  1. smith934

    Feedback Good Guy List

    Re: Good Guy List al redneck is GTG.
  2. smith934

    Chronograph Question

    Re: Chronograph Question RE the PVM, does the data stream feed directly to the computer or is the USB port just to download the data to the computer later? Also it appears that you need 120Vac to power a 12Vdc lump-in-line source for the PVM. Is this correct? If so, it's of no use to me as...
  3. smith934

    Chronograph Question

    Anyone aware of a chronograph that interfaces with a laptop/netbook via USB. What I mean is one that consists of a chrono "head" unit that interfaces directly with the computer running the chrono software vs simply being able to download the data to a computer. With inexpensive netbooks...
  4. smith934

    West TN rifle ranges?

    Re: West TN rifle ranges? It's a bit of a haul from Paris (I'm originally from Humboldt) but there is MSSA in Memphis. There range goes out to 600 yds. and they put on F class and HP matches among other stuff. MSSA This site has listings for ranges in all states and includes maps...
  5. smith934

    Gunsmithing Torque for piller bedded action

    Re: Torque for piller bedded action You did mean 65 inch pounds, did you not? I would say that one of the prime reasons, other than it's spec, at leat on 700 actions, is repeatability. I've removed and retorqued my primary rifle a couple of times with no change in zero.
  6. smith934

    Advanced Marksmanship I CANT, and I want to stop

    Re: I CANT, and I want to stop <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body"> I heard that David Tubb cants his rifle around 7 degrees. And my guess is that he could outshoot 99% of folks on this site. </div></div>...
  7. smith934

    Advanced Marksmanship A simple sling/bipod method

    Re: A simple sling/bipod method Greg asked Shane early on if the rear part of the sling was loose or if disconnected from the stock. Try using the loose rear portion of the sling instead of a bag. Currently I have a section of M16 sling on my rifle that I use instead of a bag. I wear a HP...
  8. smith934

    When cleaning- bore brush or no?

    Re: When cleaning- bore brush or no? Butch's Bore Shine
  9. smith934

    Feedback Good Guy List

    Re: Good Guy List These 3 guys are definitely GTG: USMCj Rhys TacticalStocks
  10. smith934

    First reloads through my .308

    Re: First reloads through my .308 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: queequeg</div><div class="ubbcode-body">Make sure you try some Varget in that rifle too. It tends to be even better than IMR4064 under 168s and 175s in the .308Win. </div></div>...
  11. smith934

    Gunsmithing AICS Action Screws?

    Re: AICS Action Screws? Thanks for the info Stacey.
  12. smith934

    Gunsmithing AICS Action Screws?

    Anyone know the proper size hex wrench to use on the action screws in an AICS? It appears that I don't have the proper size wrench. It's always something.
  13. smith934

    210m's in stock at Natchez ** all gone now**

    Re: 210m's in stock at Natchez Nice to see that some of you were able to get them. Personally I say the **** with them. Refuse to sell in AL because they don't want to upset their dealers, catch is they don't have any dealers, in N. AL at least. Catch 22.
  14. smith934

    Gunsmithing So you want to build an Ar15?

    Re: So you want to build an Ar15? Understood, just didn't want someone to buy a .223 chambered barrel during their build and then shoot 5.56 ammo as they may or may not encounter a prob. Good post BTW.
  15. smith934

    Lapua Brass Question

    Re: Lapua Brass Question Thanks for the info trigger time. I can get my hands on 50 once fired (by me) and 50 virgin Lapua cases that I sold to a friend a couple of years ago. He's never used it and will sell it back. Guess I'd better call him. Hell I have to borrow my old Redding dies...
  16. smith934

    Lapua Brass Question

    Does Lapua still make 300 WM Brass? Googled for it and can't find any. Sugestions? How does Norma brass compare with Lapua if Lapua no longer available? Thanks
  17. smith934

    Gunsmithing So you want to build an Ar15?

    Re: So you want to build an Ar15? Admitting that I've never built one, wouldn't going with 5.56 vs. .223 be the better option? We've all heard of possible pressure problems using 5.56 in a .223 chambered AR, but not the other way around. Not trying to pick nits but...
  18. smith934

    dressing up a 40x

    Re: dressing up a 40x Buy a box of several different brands of match ammo from Champions Choice. Find out which your 40X likes and then go back to them for more out of the same lot. Just let them know what you're planning to do and they'll accomodat4e you.
  19. smith934

    Which Company makes best stock pack?

    Re: Which Company makes best stock pack? +1 for Eagle and Triad
  20. smith934

    Gunsmithing .338 Lapua/300 WM Question

    Re: .338 Lapua/300 WM Question Thanks. Exactly what I need to know. Currently it's in completely stock configuration. No mods at all.
Top Bottom
Back
Home
Forums
Merch
Alerts